Artvin Villa Door

What is asked for in a villa door in Artvin?

Villa door demand in Artvin comes from the coastal and valley houses in Hopa, Arhavi and Borçka, and from the plateau and mountain houses around Şavşat and Yusufeli. The two groups are nothing alike: on the coast the rain is almost continuous, while on the plateau the house stands closed for part of the year and lies under snow. What they share is the terrain — at almost every address the entrance is on a steep slope and the installation team may have to walk the last stretch. Owners usually mention this from the outset.

What changes villa door prices in Artvin?

No single item sets the price of a villa door; dimensions, leaf construction and surface all enter the calculation together. Non-standard openings mean a purpose-made frame, and that is the first step in the cost. The second is the leaf: single or double, with or without a side panel or transom. The third is the surface — there is a clear difference between plain paint, timber texture and composite cladding. On the hardware side, stainless specification, the number of locking points and a door closer add to the total. Because everything is made to measure we do not publish a catalogue price. The survey is carried out online and free of charge; once you share the dimensions and a photograph we itemise the quote line by line, so you can see what each item costs. Installation is discussed as a separate item.

Villa door models and surface options

Model families are separated by leaf pattern: panelled classic, cassette-panel, horizontal-louvre and straight-lined contemporary surfaces. Classic patterns cast shadow through carving depth and sit well on stone or rendered facades; louvre and straight-lined surfaces suit newer glass-and-aluminium buildings. In colour, anthracite grey (RAL 7016), off-white and walnut-honey tones are the most requested. All models can be seen together on the villa door models page; every pattern there is built to the same body standard, and what differs between them is the surface and the hardware.

Exterior entrance and composite villa doors

An exterior entrance door solves a different set of problems from an internal one: rain, sun, temperature difference and forced entry. That is why a thermally broken leaf, a double line of gaskets and a threshold profile that directs water outwards are treated as standard on an exterior entrance. Composite-clad options bring a separate advantage at the surface: the cladding layer behaves more stably than paint against UV and moisture, and colour fade progresses more slowly. A composite surface gives a close-to-real timber texture without carrying the maintenance load of timber.

How do conditions in Artvin change the technical choice?

The coastal strip sits in ISO 9223 class C3-C4, and there the surface is wet more often than it is dry. Inland, towards Yusufeli and Şavşat, the class drops as the valleys become drier, but humidity is still above the national average. On the coast rain is close to constant and the surface never really dries; water clings to horizontal surfaces and profile joints, and moisture that gets behind a gasket has no chance to drain — that is the real source of the problem. So a drained gasket channel, factory-sealed leaf edges and a drain hole in the lower frame profile are all needed together here. On steep ground water runs towards the door rather than pooling in front of it, and the threshold has to meet running water. On the plateau the priority changes: for the long closed season, snow load and frost, low-temperature gaskets and a multi-point lock come first.

Measurement, production and installation

The process starts with a free online survey: you measure the four corners and both diagonals of the opening and share them with a photograph, and we check the plumb of the frame and the floor level together. Once the measurements are approved the leaf is produced in our own factory — we do not subcontract, so a change of pattern or colour is still possible before production starts. Installation is quoted as a separate item; the frame perimeter is filled with polyurethane and the lock and hinges are adjusted before handover. You can see our coverage in and around Artvin on the Artvin service area page, and reach us for a survey and quote through the contact page.

Maintenance, warranty and spare parts

A steel door is not a maintenance-free product, but what it asks for is simple. Once a year, light oil on the hinges and the lock mechanism, a damp cloth along the gasket line and a fresh-water wash of the surface is enough in most cases. At addresses by the sea, shortening that cycle to six months keeps salt from settling into the paint film. A two-year warranty certificate is issued on delivery, and our cover for manufacturing and workmanship defects is not limited in time. On the lock mechanism the manufacturer's own warranty can run longer depending on the model. The only case outside the warranty is deformation caused by impact or forced entry. On spare parts we keep the cylinder, the handle set and the hinge pin in stock — a door does not stay shut waiting for a part years later.

Frequently asked in Artvin

The gasket is sound but mould forms around the door — why?

Mould comes not from leakage but from a lack of drainage. If moisture that gets behind the gasket cannot get out, drying never happens — and in Artvin's climate that state lasts almost year-round. The fix is not a tighter gasket; on the contrary, the gasket channel must be drained and the hole in the lower frame profile must be clear. On an existing door, where the drain hole has been closed with paint or silicone, opening it is often enough on its own.

The plateau house is shut all winter — how should we leave the door?

Three things help. Leave the lock treated with a silicone-based product — grease thickens in the cold and does the opposite. Close the leaf on the multi-point lock; held to the frame at four points, it does not warp over a long closed season. And where possible, do not leave a hollow in front of the door where snow can collect: water that melts and refreezes presses the threshold from below and the door rubs on your return. With those three done, the door opens on the first try in spring.