Free online survey, made to measure: +90 532 689 21 46
Bayrakdoor Steel Doors

Elazığ Villa Door

Product CodeBD-VK23
Price range$1,250 – $4,150

As of 2026. Varies by dimensions, finish and delivery location; the final quote is issued after a free site survey.

Made-to-measure villa entrance door for Elazığ: free online survey, produced in our own factory, installation quoted separately.

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeBD-VK23

This is here to block automated submissions — it only takes a second.

  • Survey and measurement are free
  • Same-day response
  • Made in our own factory
  • Two-year certificate, workmanship without a time limit
Download this model's PDF spec sheet
Share this model
Worldwide shipping & export
Made in our own factory
Two-year certificate, workmanship without a time limit

What is asked for in a villa door in Elazığ?

Villa door demand in Elazığ comes from the garden houses around the centre, from the view houses along the Keban reservoir and from new build in Kovancılar and Karakoçan. In lakeside houses the wish for a glazed entrance or side panels is strong for the view. The shared observation from there concerns mornings: the door and its surroundings are damp early on and dry as the day goes on. Inland this is not seen and demand rests directly on insulation and security.

What changes villa door prices in Elazığ?

No single item sets the price of a villa door; dimensions, leaf construction and surface all enter the calculation together. Non-standard openings mean a purpose-made frame, and that is the first step in the cost. The second is the leaf: single or double, with or without a side panel or transom. The third is the surface — there is a clear difference between plain paint, timber texture and composite cladding. On the hardware side, stainless specification, the number of locking points and a door closer add to the total. Because everything is made to measure we do not publish a catalogue price. The survey is carried out online and free of charge; once you share the dimensions and a photograph we itemise the quote line by line, so you can see what each item costs. Installation is discussed as a separate item.

Villa door models and surface options

Model families are separated by leaf pattern: panelled classic, cassette-panel, horizontal-louvre and straight-lined contemporary surfaces. Classic patterns cast shadow through carving depth and sit well on stone or rendered facades; louvre and straight-lined surfaces suit newer glass-and-aluminium buildings. In colour, anthracite grey (RAL 7016), off-white and walnut-honey tones are the most requested. All models can be seen together on the villa door models page; every pattern there is built to the same body standard, and what differs between them is the surface and the hardware.

Exterior entrance and composite villa doors

An exterior entrance door solves a different set of problems from an internal one: rain, sun, temperature difference and forced entry. That is why a thermally broken leaf, a double line of gaskets and a threshold profile that directs water outwards are treated as standard on an exterior entrance. Composite-clad options bring a separate advantage at the surface: the cladding layer behaves more stably than paint against UV and moisture, and colour fade progresses more slowly. A composite surface gives a close-to-real timber texture without carrying the maintenance load of timber.

How do conditions in Elazığ change the technical choice?

Inland the province is ISO 9223 class C2. Around the Keban reservoir humidity draws the class towards C3, mainly because the surface stays damp longer rather than because of any particular chemical effect. Near the lake, morning damp keeps surfaces wet longer than in the surrounding area, and that wet time is precisely what drives corrosion. Winters are cold with a long frost period and summers hot and dry; the annual range is wide, the leaf moves across it and standard gaskets lose their elasticity. In practice, by the lake a drained gasket channel, a clear drain hole in the lower frame profile and a clad surface come forward; inland, a thermally broken leaf and EPDM gaskets made for a wide temperature range. Where a glazed entrance is wanted, an edge-protected double-glazed unit and a replaceable glazing gasket are needed — if the joint at the glass edge takes in water, the problem shows up in the frame, not the glass.

Measurement, production and installation

The process starts with a free online survey: you measure the four corners and both diagonals of the opening and share them with a photograph, and we check the plumb of the frame and the floor level together. Once the measurements are approved the leaf is produced in our own factory — we do not subcontract, so a change of pattern or colour is still possible before production starts. Installation is quoted as a separate item; the frame perimeter is filled with polyurethane and the lock and hinges are adjusted before handover. You can see our coverage in and around Elazığ on the Elazığ service area page, and reach us for a survey and quote through the contact page.

Maintenance, warranty and spare parts

A steel door is not a maintenance-free product, but what it asks for is simple. Once a year, light oil on the hinges and the lock mechanism, a damp cloth along the gasket line and a fresh-water wash of the surface is enough in most cases. At addresses by the sea, shortening that cycle to six months keeps salt from settling into the paint film. We give a two-year warranty on the body and the welding work and five years on the lock mechanism; the only case outside the warranty is deformation caused by impact or forced entry. On spare parts we keep the cylinder, the handle set and the hinge pin in stock — a door does not stay shut waiting for a part years later.

Frequently asked in Elazığ

By the lake the door is damp in the mornings — is that a problem?

The damp itself is not the problem — not drying is. Morning damp is normal; if it dries during the day there is no issue. If a permanent mark or mould forms around the door, moisture behind the gasket cannot drain, and the place to look is the drain hole in the lower frame profile. Finding it closed with paint or silicone is common; opening it is often enough on its own. In the long run a clad surface also copes better than paint in this setting.

Does a widely glazed door for the view spoil the insulation?

It need not, but there is a cost. As the glazed area grows the door's overall insulation falls; the way to make up for it is a double-glazed unit and a thermally broken leaf. Because the gap between summer and winter is wide in Elazığ, that compensation is genuinely needed. For those who want the view without giving up much insulation there is the side-panel solution: light and view come through the side panel while the leaf stays solid and the door's own insulation is not compromised.

Specifications

Ürün koduBD-VK23
Hizmet bölgesiElazığ
KanatIsı köprüsü kesilmiş, poliüretan dolgulu
FitilÇift sıra
ÜretimÖlçüye özel

Frequently Asked Questions

What is the lead time for a custom villa door?

Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.

How are steel doors packaged for sea freight export?

Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.

What measurements do you need to quote?

The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.

Can you manufacture to imperial (inch) dimensions?

Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.

Who installs the door at the destination?

Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.

What export documents travel with the shipment?

Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.

Do the doors carry a security class such as RC2 or RC3?

We do not state a resistance class we cannot document. Under EN 1627 a class belongs to one tested configuration, and a door built to your opening is by definition a different configuration. What we do document is the components: the lock, the hardware, the glass and the steel each carry their own manufacturer certificates, European ones included, and we send copies on request.

Which certificates can you provide for a project?

For the materials that go into the door: the certificate of the lock manufacturer, of the stainless hardware, of the laminated glass and of the steel grade, plus the export papers for the shipment itself. Tell us which documents your architect or building authority asks for and we will send what exists before you order.

You May Also Like

Before you decide

Pages where we cover the technical questions most often asked about this model: