Hatay Villa Door

What is asked for in a villa door in Hatay?

Villa door demand in Hatay comes mostly from new build since the earthquake. In houses being rebuilt in Antakya, Defne and Kırıkhan the door is often discussed before the shell is finished — which is good, because the frame anchoring can then be chosen to match the wall construction. On the İskenderun and Arsuz coast, seaside houses and gated-complex entrances dominate; there the buyer's first question is almost always the same: how many years before it rusts. In Samandağ and Dörtyol there are detached houses in gardens.

What changes villa door prices in Hatay?

No single item sets the price of a villa door; dimensions, leaf construction and surface all enter the calculation together. Non-standard openings mean a purpose-made frame, and that is the first step in the cost. The second is the leaf: single or double, with or without a side panel or transom. The third is the surface — there is a clear difference between plain paint, timber texture and composite cladding. On the hardware side, stainless specification, the number of locking points and a door closer add to the total. Because everything is made to measure we do not publish a catalogue price. The survey is carried out online and free of charge; once you share the dimensions and a photograph we itemise the quote line by line, so you can see what each item costs. Installation is discussed as a separate item.

Villa door models and surface options

Model families are separated by leaf pattern: panelled classic, cassette-panel, horizontal-louvre and straight-lined contemporary surfaces. Classic patterns cast shadow through carving depth and sit well on stone or rendered facades; louvre and straight-lined surfaces suit newer glass-and-aluminium buildings. In colour, anthracite grey (RAL 7016), off-white and walnut-honey tones are the most requested. All models can be seen together on the villa door models page; every pattern there is built to the same body standard, and what differs between them is the surface and the hardware.

Exterior entrance and composite villa doors

An exterior entrance door solves a different set of problems from an internal one: rain, sun, temperature difference and forced entry. That is why a thermally broken leaf, a double line of gaskets and a threshold profile that directs water outwards are treated as standard on an exterior entrance. Composite-clad options bring a separate advantage at the surface: the cladding layer behaves more stably than paint against UV and moisture, and colour fade progresses more slowly. A composite surface gives a close-to-real timber texture without carrying the maintenance load of timber.

How do conditions in Hatay change the technical choice?

The İskenderun and Arsuz coastline is ISO 9223 class C4; near the port and the steel works the combination of salt aerosol and industrial sulfur pushes it towards C5 — one of the heaviest atmospheres in Turkey. The mechanism: humidity keeps salt wet on the surface, and sulfur compounds from industry turn that moisture acidic. In this environment a painted surface has a short life and galvanising thickness alone is not enough; composite or laminated cladding, stainless hardware and factory-sealed leaf edges are essential. The second issue is installation: in new build the wall build-up varies widely, and a frame anchored into the wrong layer works loose within a few years however good the door is. That is why we ask about the wall section along with the measurements.

Measurement, production and installation

The process starts with a free online survey: you measure the four corners and both diagonals of the opening and share them with a photograph, and we check the plumb of the frame and the floor level together. Once the measurements are approved the leaf is produced in our own factory — we do not subcontract, so a change of pattern or colour is still possible before production starts. Installation is quoted as a separate item; the frame perimeter is filled with polyurethane and the lock and hinges are adjusted before handover. You can see our coverage in and around Hatay on the Hatay service area page, and reach us for a survey and quote through the contact page.

Maintenance, warranty and spare parts

A steel door is not a maintenance-free product, but what it asks for is simple. Once a year, light oil on the hinges and the lock mechanism, a damp cloth along the gasket line and a fresh-water wash of the surface is enough in most cases. At addresses by the sea, shortening that cycle to six months keeps salt from settling into the paint film. We give a two-year warranty on the body and the welding work and five years on the lock mechanism; the only case outside the warranty is deformation caused by impact or forced entry. On spare parts we keep the cylinder, the handle set and the hinge pin in stock — a door does not stay shut waiting for a part years later.

Frequently asked in Hatay

How many years before a door rusts in İskenderun?

The right question is not how many years but with which surface. A painted face in this atmosphere dulls and starts chalking within a few years, and once the film thins the process accelerates. With composite or laminated cladding there is no paint film, so that cycle never begins; the critical points become the leaf edges and the hardware, and both are solvable: edges are sealed at the factory, hardware is specified stainless. Proximity to the industry and the port also makes a large difference — which is why knowing the address matters.

In a new build, when should the door be measured?

When the shell is finished and the plaster and door opening are final. Measure too early and the opening changes later; leave it too late and reaching the right layer for frame anchoring becomes difficult. In Hatay the second point matters especially, because wall sections differ from site to site and a frame fixed into the insulation layer works loose within a few years. That is why, along with the measurements, we ask for the wall thickness and where possible a photograph of the section.