Custom manufacturing and worldwide export — request a quote: +90 532 689 21 46
Bayrakdoor Steel Doors
Bayrakdoor

Orange Wood Burgundy Red Villa Door BD-TR118

Product CodeBD-TR118

Square stained glass panes and orange wood medallion appliqués on a burgundy body. Product code: BD-TR118. Made to measure after an on-site survey.

Leaf construction
double leaf + twin side glass
Color / finish
burgundy-crimson
Handle
recessed pull bar
Design language
classic villa
Share this model

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeBD-TR118

This is here to block automated submissions — it only takes a second.

  • Survey and measurement are free
  • Same-day response
  • Made in our own factory
  • Lifetime manufacturing warranty
Download this model's PDF spec sheet
Worldwide shipping & export
Made in our own factory
Lifetime manufacturing warranty

BD-TR118 is a villa steel door model distinguished by its square stained glass panes and orange wood medallion appliqués on a burgundy body. Like every door we make, this model is produced to measure; no ready-made leaves are supplied from stock.

Product Code: BD-TR118

Leaf and Glass Layout

The leaf structure is double leaf with twin side glass. The leaf surface is worked with orange wood medallion appliqués. The finish is a burgundy-red tone.

The glass section consists of square leaded stained glass panes. A recessed handle is the chosen hardware. The finish pictured is the catalog selection — a different finish can be chosen from the surface finish options.

The design language is defined as classic villa.

Which Entrances Suit This Model?

It is chosen primarily for garden homes and detached homes. Since the side sections extend the opening, it suits wide-fronted entrances better than narrow ones; it also brings daylight into the hall. We've compared where villa doors and building entrance doors diverge on the difference between a villa door and a building entrance door page.

Production and Installation Process

Production begins with measurements taken on site. How the door opening is measured is covered on the how measurements are taken page; material choices on the galvanized or DKP sheet steel and lock systems pages. This model's technical specifications are in the table below. The care steps that extend the door's life are on the care and lifespan page, and coverage details on the warranty and service page.

Frequently Asked Questions

How much does model BD-TR118 cost?

A price can't be quoted before measuring. The opening size and your finish, glass and lock choices directly affect the amount; the survey is free and is followed by an itemized quote. See steel door prices for details.

Can I order this model in a color other than burgundy-red?

Yes. The burgundy-red finish pictured is this model's catalog selection; it can be produced in other colors with compact laminate, composite, marine plywood and wood veneer options. We've compared the options on the surface finish options page.

Can the glass on the BD-TR118 be changed?

Yes. The glass pictured is this model's catalog finish; provided Şişecam 5+5 mm laminated glass is used, it can be produced in different colors and patterns. A glassless version is also possible.

How is the BD-TR118 measured?

We take the measurements during the survey; nothing is needed from you. Measurements come from the door opening, not the existing leaf — the method is explained on the how measurements are taken page.

How can I order model BD-TR118?

You can fill out the pre-order form on our site or reach us at 0532 689 21 46. Mentioning product code BD-TR118 in your request speeds things up. You can browse our other villa steel door models on the villa steel door models page.

Specifications

Product codeBD-TR118
CategoryVilla Steel Door Models
Leaf constructiondouble leaf + twin side glass
Color / finishburgundy-crimson
Surface patternorange wood medallion appliques
Handlerecessed pull bar
Design languageclassic villa
Access systemOptional card or keypad entry
Sheet thicknessFrame 2 mm (0.079"), leaf 1.5+1.5 mm (0.118" total) DKP steel sheet (Ereğli A1)
FrameEreğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent
Frame reinforcementLock and hinge areas reinforced with 3 mm (0.118") DKP steel sheet
LeafEreğli A1 grade 1.5 mm (0.059") + 1.5 mm (0.059") omega-bent, monoblock-reinforced pan system
Leaf reinforcementLock and hinge area reinforced with 3 mm (0.118") angle bar
Leaf thicknessBare metal 70 mm (2.76") — 90 mm (3.54") in total
Infill80 kg/m³ rock wool
Lock surroundintegrated with 1 mm (0.039") grade 304 stainless steel
Hinge3 adjustable 20 mm (0.787") ball-bearing pin hinges
Hinge reinforcement5 mm (0.197") thick flat bar
Fixed pin5 units on the hinge side, 20 mm (0.787") diameter
GasketSilicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf (insect-, dust- and airtight)
Surface finish10 mm (0.394") Camsan first-grade iroko
Finish optionsPowder coating, natural wood, marine plywood, iroko wood or composite compact laminate
VarnishPolyurethane infill, 90-micron coverage rating
PolishAkzo Nobel
Accessoriesfirst-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions)
InstallationOne-piece inner/outer frame, clamp-grip jointing, fastened with M8 bolts
Frame-to-wall gap1 cm (0.394"), filled with polyurethane foam
ProductionManufactured to custom on-site measurements
WarrantyUnlimited coverage for manufacturing defects — 2-year official warranty certificate
Lock systemOptional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock
Glass sectionsquare leaded stained glass panels
Glass typeŞişecam 5+5 mm (0.394" total) laminated glass (impact resistant)

Frequently Asked Questions

What is the lead time for a custom villa door?

Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.

How are steel doors packaged for sea freight export?

Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.

What measurements do you need to quote?

The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.

Can you manufacture to imperial (inch) dimensions?

Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.

Who installs the door at the destination?

Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.

What export documents travel with the shipment?

Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.

You May Also Like

Before you decide

Pages where we cover the technical questions most often asked about this model:

classic design

More Models in This Style

View All

colored

Models in the Same Color Family

View All