Richly carved pediment and columns framing a white, palace-style villa door. Product code: BD-TR08. Manufactured to measure, following an on-site survey.
- Leaf construction
- single leaf + double narrow sidelight
- Color / finish
- white
- Handle
- classic handle
- Design language
- palace villa
- Upper section
- carved pediment
Pre-Order & Price Request
This model is made to measure. Leave your request and we'll call you to arrange a site survey.
- Survey and measurement are free
- Same-day response
- Made in our own factory
- Lifetime manufacturing warranty
BD-TR08 is a villa steel door model distinguished by its richly carved pediment and columns framing a white, palace-style villa door. Like every door we build, this model is manufactured to measure — there's no ready-made leaf pulled from stock. The catalog finish is a white tone.
Product Code: BD-TR08
Leaf, Glass and Pediment
The leaf layout is a single leaf with double narrow side glazing. The leaf surface is worked with a richly carved pediment, columns and an ornately carved panel. The catalog color is a white tone.
The glazing takes the form of narrow vertical glass on both sides. There's a carved pediment above the leaf. A classic handle is used. Cladding and hardware aren't fixed; it can be produced with the alternatives on our cladding options page.
The design language is described as palace-style villa.
Who Is This Model For?
It's chosen primarily for villa entrances and residence apartments. It's designed for wide openings: the side sections both fill the required span and bring light into the entrance. We've compared where a villa door and a building entrance door part ways on our villa door vs. building entrance door page.
From Measurement to Installation
Production starts with an on-site measurement. How the door opening is measured is covered on our how measurements are taken page; material choices are compared on our galvanized vs. cold-rolled steel and lock systems pages. The technical specifications for this model are in the table below. After delivery, our warranty and service terms apply — see our care and lifespan page for how to protect the finish.
Frequently Asked Questions
How much does BD-TR08 cost?
We can't quote a price before measuring. The size of the door opening, along with the cladding, glass and lock you choose, directly affects the amount; the survey is free, and an itemized quote follows. See our steel door prices page for details.
Can BD-TR08 be made in a different color?
Yes, the color isn't fixed. The catalog shows white, but the cladding is chosen to suit the project; we've written up which finish works best where on our cladding options page.
Can the glass be changed on the BD-TR08 model?
Yes. The glass shown is this model's catalog finish; it can be produced in a different color and pattern as long as Şişecam 5+5 mm laminated glass is used. A version without glass is also possible.
Do I need to take the measurement myself?
We take the measurement during the survey; nothing is expected of you. The measurement is taken from the door opening, not the existing leaf — we've explained the method on our how measurements are taken page.
How can I order the BD-TR08 model?
You can fill out the pre-order form on the site, or reach us at 0532 689 21 46. Mentioning the BD-TR08 product code in your request speeds up the process. You can browse other villa steel door models on our villa steel door models page.
Specifications
| Product code | BD-TR08 |
| Category | Villa Steel Door Models |
| Leaf construction | single leaf + double narrow sidelight |
| Color / finish | white |
| Surface pattern | richly carved pediment, columns and ornate panel |
| Handle | classic handle |
| Upper section | carved pediment |
| Design language | palace villa |
| Access system | Optional card or keypad entry |
| Sheet thickness | Frame 2 mm (0.079"), leaf 1.5+1.5 mm (0.118" total) DKP steel sheet (Ereğli A1) |
| Frame | Ereğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent |
| Frame reinforcement | Lock and hinge areas reinforced with 3 mm (0.118") DKP steel sheet |
| Leaf | Ereğli A1 grade 1.5 mm (0.059") + 1.5 mm (0.059") omega-bent, monoblock-reinforced pan system |
| Leaf reinforcement | Lock and hinge area reinforced with 3 mm (0.118") angle bar |
| Leaf thickness | Bare metal 70 mm (2.76") — 90 mm (3.54") in total |
| Infill | 80 kg/m³ rock wool |
| Lock surround | integrated with 1 mm (0.039") grade 304 stainless steel |
| Hinge | 3 adjustable 20 mm (0.787") ball-bearing pin hinges |
| Hinge reinforcement | 5 mm (0.197") thick flat bar |
| Fixed pin | 5 units on the hinge side, 20 mm (0.787") diameter |
| Gasket | Silicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf (insect-, dust- and airtight) |
| Surface finish | 10 mm (0.394") Camsan first-grade iroko |
| Finish options | Powder coating, natural wood, marine plywood, iroko wood or composite compact laminate |
| Varnish | Polyurethane infill, 90-micron coverage rating |
| Polish | Akzo Nobel |
| Accessories | first-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions) |
| Installation | One-piece inner/outer frame, clamp-grip jointing, fastened with M8 bolts |
| Frame-to-wall gap | 1 cm (0.394"), filled with polyurethane foam |
| Production | Manufactured to custom on-site measurements |
| Warranty | Unlimited coverage for manufacturing defects — 2-year official warranty certificate |
| Lock system | Optional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock |
| Glass section | narrow vertical glass on both sides |
| Glass type | Şişecam 5+5 mm (0.394" total) laminated glass (impact resistant) |
Frequently Asked Questions
What is the lead time for a custom villa door?
Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.
How are steel doors packaged for sea freight export?
Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.
What measurements do you need to quote?
The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.
Can you manufacture to imperial (inch) dimensions?
Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.
Who installs the door at the destination?
Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.
What export documents travel with the shipment?
Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.
- • A free on-site survey is carried out before ordering to measure the door opening.
- • Production follows the dimensions and finish you approve after the survey.
- • Installation is carried out on-site by our own team.
- • Our warranty against manufacturing and workmanship defects is unlimited; an official 2-year warranty document is provided on delivery.
- • Price incl. VAT: %20 Includes VAT.
You May Also Like
Before you decide
Pages where we cover the technical questions most often asked about this model:
classic design
More Models in This Style
white and cream
