Custom manufacturing and worldwide export — request a quote: +90 532 689 21 46
Bayrakdoor Steel Doors
Bayrakdoor

Eight-Section Red Leaf Villa Door BD-TR35

Product CodeBD-TR35

A red eight-section panel grid with a wrought iron glazed window above. Product code: BD-TR35. Made to measure after an on-site survey.

Leaf construction
single leaf + top window
Color / finish
red leaf + grey frame
Handle
black knocker and letter slot
Design language
classic villa
Upper section
wrought iron glazed window
Share this model

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeBD-TR35

This is here to block automated submissions — it only takes a second.

  • Survey and measurement are free
  • Same-day response
  • Made in our own factory
  • Lifetime manufacturing warranty
Download this model's PDF spec sheet
Worldwide shipping & export
Made in our own factory
Lifetime manufacturing warranty

A red eight-section panel grid with a wrought iron glazed window above — that is what sets villa steel door model BD-TR35 apart. Production starts after your order: first comes an on-site survey, then the leaf is built to the door opening.

Product Code: BD-TR35

Leaf, Glass and Transom

The leaf layout is single leaf with an upper window. The leaf shows an eight-section panel grid. The catalog color is a red leaf with a grey frame.

The model features a wrought iron glazed window at the top. The upper section carries a wrought iron glazed window. It is completed with a black knocker and letter slot. Color, pattern and handle choices can be adapted to your project; the alternatives are compared on the surface finish options page.

The design language is defined as classic villa.

Who Is This Model For?

It is chosen primarily for villa entrances and residence apartments. Its single-leaf design fits entrances of standard width. We've compared where villa doors and building entrance doors diverge on the difference between a villa door and a building entrance door page.

From Measurement to Installation

We take the measurements during the survey — based on the door opening, not the existing leaf; the method is explained on the how measurements are taken page. This model's frame, leaf and lock specifications are in the table below; the lock systems and galvanized or DKP sheet steel pages detail the options. The care steps that extend the door's life are on the care and lifespan page, and coverage details on the warranty and service page.

Frequently Asked Questions

How much does the BD-TR35 cost?

There is no fixed price — since every leaf is made to measure, the amount varies with size, finish and lock choice. After the survey we send a written, itemized quote. The line items are detailed on the steel door prices page.

Can the BD-TR35 be produced in a different color?

Yes. The red leaf and grey frame finish pictured is this model's catalog selection; it can be produced in other colors with compact laminate, composite, marine plywood and wood veneer options. We've compared the options on the surface finish options page.

Can the glass on the BD-TR35 be changed?

Yes. The glass pictured is this model's catalog finish; provided Şişecam 5+5 mm laminated glass is used, it can be produced in different colors and patterns. A glassless version is also possible.

How does the measuring stage work when ordering the BD-TR35?

Measuring is our job. We record the clear width of the opening, the height from the finished floor and the wall thickness; details are on the how measurements are taken page.

How can I order model BD-TR35?

You can fill out the pre-order form on our site or reach us at 0532 689 21 46. Mentioning product code BD-TR35 in your request speeds things up. You can browse our other villa steel door models on the villa steel door models page.

Specifications

Product codeBD-TR35
CategoryVilla Steel Door Models
Leaf constructionsingle leaf + top window
Color / finishred leaf + grey frame
Surface patterneight-section panel grid
Handleblack knocker and letter slot
Upper sectionwrought iron glazed window
Design languageclassic villa
Access systemOptional card or keypad entry
Sheet thicknessFrame 2 mm (0.079"), leaf 1.5+1.5 mm (0.118" total) DKP steel sheet (Ereğli A1)
FrameEreğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent
Frame reinforcementLock and hinge areas reinforced with 3 mm (0.118") DKP steel sheet
LeafEreğli A1 grade 1.5 mm (0.059") + 1.5 mm (0.059") omega-bent, monoblock-reinforced pan system
Leaf reinforcementLock and hinge area reinforced with 3 mm (0.118") angle bar
Leaf thicknessBare metal 70 mm (2.76") — 90 mm (3.54") in total
Infill80 kg/m³ rock wool
Lock surroundintegrated with 1 mm (0.039") grade 304 stainless steel
Hinge3 adjustable 20 mm (0.787") ball-bearing pin hinges
Hinge reinforcement5 mm (0.197") thick flat bar
Fixed pin5 units on the hinge side, 20 mm (0.787") diameter
GasketSilicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf (insect-, dust- and airtight)
Surface finish10 mm (0.394") Camsan first-grade iroko
Finish optionsPowder coating, natural wood, marine plywood, iroko wood or composite compact laminate
VarnishPolyurethane infill, 90-micron coverage rating
PolishAkzo Nobel
Accessoriesfirst-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions)
InstallationOne-piece inner/outer frame, clamp-grip jointing, fastened with M8 bolts
Frame-to-wall gap1 cm (0.394"), filled with polyurethane foam
ProductionManufactured to custom on-site measurements
WarrantyUnlimited coverage for manufacturing defects — 2-year official warranty certificate
Lock systemOptional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock
Glass sectionwrought iron glazed window at top
Glass typeŞişecam 5+5 mm (0.394" total) laminated glass (impact resistant)

Frequently Asked Questions

What is the lead time for a custom villa door?

Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.

How are steel doors packaged for sea freight export?

Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.

What measurements do you need to quote?

The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.

Can you manufacture to imperial (inch) dimensions?

Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.

Who installs the door at the destination?

Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.

What export documents travel with the shipment?

Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.

You May Also Like

Before you decide

Pages where we cover the technical questions most often asked about this model:

classic design

More Models in This Style

View All

anthracite and grey

Models in the Same Color Family

View All