Custom manufacturing and worldwide export — request a quote: +90 532 689 21 46
Bayrakdoor Steel Doors
Bayrakdoor

Concrete Textured Grey Villa Door BD-TR111

Product CodeBD-TR111

A horizontal wood band and recessed handle cutting across a concrete-textured grey surface. Product code: BD-TR111. Made to measure after an on-site survey.

Leaf construction
single leaf + double narrow sidelight
Color / finish
grey concrete texture + wood band
Handle
handle recessed into band
Design language
designer villa
Share this model

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeBD-TR111

This is here to block automated submissions — it only takes a second.

  • Survey and measurement are free
  • Same-day response
  • Made in our own factory
  • Lifetime manufacturing warranty
Download this model's PDF spec sheet
Worldwide shipping & export
Made in our own factory
Lifetime manufacturing warranty

A horizontal wood band and recessed handle cutting across a concrete-textured grey surface. It appears in the catalogue under code BD-TR111. Production begins after your order: first we carry out an on-site survey, then the leaf is built to fit the door opening. The finish in the photo is grey concrete-textured cladding with a wood band.

Product Code: BD-TR111

Glass and Surface Details

The model is configured as a single leaf with twin narrow side windows. The surface carries a horizontal wood band across the concrete texture. The colour applied is grey concrete texture with a wood band.

The glazing takes the form of narrow vertical side windows. A handle recessed into the band was chosen for this model. Colour, pattern and handle choices can be adapted to your project; the options are compared on the cladding options page.

The design language is best described as designer villa.

Suitable Entrances

It is most often used for residence apartments and homes with gardens. Thanks to the side sections, wide door openings are closed with a single assembly. The difference between these two types is not just size; we go into detail on the villa door vs building entrance door page.

Measurement, Production and Installation

Production starts with measurements taken on site. The how to measure page explains how the opening is measured; material choices are covered on the galvanized or DKP sheet steel and lock systems pages. The technical specifications for this model are listed in the table below. After delivery, warranty and service coverage applies; see the care and lifespan page for keeping the surface in good condition.

Frequently Asked Questions

What does model BD-TR111 cost?

We cannot quote a price before measuring. The size of the opening and your cladding, glass and lock choices directly affect the amount; the survey is free and is followed by an itemized quote. See steel door prices for details.

Can the colour of BD-TR111 be changed?

Yes. The grey concrete-textured finish with wood band shown is this model's catalogue selection; it can be produced in different colours with compact laminate, composite, marine plywood and wood veneer options. We compare the alternatives on the cladding options page.

Can the glass pattern be different?

Yes. The glass shown is this model's catalogue finish; it can be produced in a different colour or pattern, provided Şişecam 5+5 mm laminated glass is used. It can also be produced without glass.

How is BD-TR111 measured?

Our survey team measures on site. If you would still like to know how it works, the how to measure page explains the three points we measure from.

How do I get a quote for BD-TR111?

You can fill in the pre-order form on our website or call us on 0532 689 21 46. Quoting product code BD-TR111 in your request helps us respond faster. You can browse our other villa steel door models on the villa steel door models page.

Specifications

Product codeBD-TR111
CategoryVilla Steel Door Models
Leaf constructionsingle leaf + double narrow sidelight
Color / finishgrey concrete texture + wood band
Surface patternhorizontal wood band on concrete-textured surface
Handlehandle recessed into band
Design languagedesigner villa
Access systemOptional card or keypad entry
Sheet thicknessFrame 2 mm (0.079"), leaf 1.5+1.5 mm (0.118" total) DKP steel sheet (Ereğli A1)
FrameEreğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent
Frame reinforcementLock and hinge areas reinforced with 3 mm (0.118") DKP steel sheet
LeafEreğli A1 grade 1.5 mm (0.059") + 1.5 mm (0.059") omega-bent, monoblock-reinforced pan system
Leaf reinforcementLock and hinge area reinforced with 3 mm (0.118") angle bar
Leaf thicknessBare metal 70 mm (2.76") — 90 mm (3.54") in total
Infill80 kg/m³ rock wool
Lock surroundintegrated with 1 mm (0.039") grade 304 stainless steel
Hinge3 adjustable 20 mm (0.787") ball-bearing pin hinges
Hinge reinforcement5 mm (0.197") thick flat bar
Fixed pin5 units on the hinge side, 20 mm (0.787") diameter
GasketSilicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf (insect-, dust- and airtight)
Surface finish10 mm (0.394") Camsan first-grade iroko
Finish optionsPowder coating, natural wood, marine plywood, iroko wood or composite compact laminate
VarnishPolyurethane infill, 90-micron coverage rating
PolishAkzo Nobel
Accessoriesfirst-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions)
InstallationOne-piece inner/outer frame, clamp-grip jointing, fastened with M8 bolts
Frame-to-wall gap1 cm (0.394"), filled with polyurethane foam
ProductionManufactured to custom on-site measurements
WarrantyUnlimited coverage for manufacturing defects — 2-year official warranty certificate
Lock systemOptional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock
Glass sectionnarrow vertical side glass panels
Glass typeŞişecam 5+5 mm (0.394" total) laminated glass (impact resistant)

Frequently Asked Questions

What is the lead time for a custom villa door?

Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.

How are steel doors packaged for sea freight export?

Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.

What measurements do you need to quote?

The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.

Can you manufacture to imperial (inch) dimensions?

Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.

Who installs the door at the destination?

Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.

What export documents travel with the shipment?

Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.

You May Also Like

Before you decide

Pages where we cover the technical questions most often asked about this model:

modern design

More Models in This Style

View All

wood tone

Models in the Same Color Family

View All