Custom manufacturing and worldwide export — request a quote: +90 532 689 21 46
Bayrakdoor Steel Doors
Bayrakdoor

Square-Panel Light Gray-Blue Villa Door BD-TR51

Product CodeBD-TR51

Light gray-blue square panel grid, vertical windows and a dentil-cornice upper section. Product code: BD-TR51. Made to measure after an on-site survey.

Leaf construction
single leaf + double side panel + transom window
Color / finish
light grey-blue
Handle
silver handle
Design language
classic villa
Upper section
glazed transom window
Share this model

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeBD-TR51

This is here to block automated submissions — it only takes a second.

  • Survey and measurement are free
  • Same-day response
  • Made in our own factory
  • Lifetime manufacturing warranty
Download this model's PDF spec sheet
Worldwide shipping & export
Made in our own factory
Lifetime manufacturing warranty

A light gray-blue square panel grid, vertical windows and a dentil-cornice upper section. It appears in our catalogue under code BD-TR51. It is not sold in ready-made sizes; your entrance is measured on site and the leaf is manufactured to fit. The catalogue finish is a light gray-blue tone.

Product Code: BD-TR51

Leaf, Glass and Pediment

The leaf structure is a single leaf with two side panels and a transom window. The leaf surface is worked as a square panel grid. The finish is a light gray-blue tone.

The glazing is resolved as vertically divided windows. A glazed transom window sits above the leaf. A silver handle was chosen for this model. Color, pattern and handle choices can be tailored to your project; the cladding options page compares the alternatives.

The design language is defined as classic villa.

Which Entrances Does It Suit?

Homes with gardens and villa entrances are this model's typical settings. Thanks to the side sections, wide door openings are closed with a single assembly. We compare where villa doors and building entrance doors differ on the villa door vs. building entrance door page.

Production and Installation Process

Measurements are taken from the door opening, not the existing leaf; we explain the process step by step on the how measurements are taken page. Frame, sheet thickness, infill and lock values are listed in the specification table below. Sheet steel choices are compared on the galvanized or DKP sheet steel page and lock alternatives on the lock systems page. After delivery, warranty and service coverage takes effect; see the care and lifespan page for protecting the surface.

Frequently Asked Questions

What does the BD-TR51 cost?

We do not publish list prices, because every door is made to measure. The cost is determined by the size of the door opening and the cladding, glass and lock you choose. After a free site survey we provide a written, itemized quote; we explain what drives the price on the steel door prices page.

Can the color of the BD-TR51 be changed?

It can. Light gray-blue is simply the finish in the photo, not a fixed choice — you can pick from the alternatives on the cladding options page.

Can the glass in the BD-TR51 be changed?

Yes. The glass in the image is this model's catalogue finish; it can be produced in different colors and patterns, provided Şişecam 5+5 mm laminated glass is used. The door can also be made without glass.

Do I need to take the measurements myself?

We take the measurements during the site survey; nothing is required from you. Measurements come from the door opening, not the existing leaf — we describe the method on the how measurements are taken page.

How can I order the BD-TR51 model?

You can fill in the pre-order form on our site or call us on 0532 689 21 46. Mentioning product code BD-TR51 in your request speeds things up. You can browse other villa steel door models on the villa steel door models page.

Specifications

Product codeBD-TR51
CategoryVilla Steel Door Models
Leaf constructionsingle leaf + double side panel + transom window
Color / finishlight grey-blue
Surface patternsquare panel grid
Handlesilver handle
Upper sectionglazed transom window
Design languageclassic villa
Access systemOptional card or keypad entry
Sheet thicknessFrame 2 mm (0.079"), leaf 1.5+1.5 mm (0.118" total) DKP steel sheet (Ereğli A1)
FrameEreğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent
Frame reinforcementLock and hinge areas reinforced with 3 mm (0.118") DKP steel sheet
LeafEreğli A1 grade 1.5 mm (0.059") + 1.5 mm (0.059") omega-bent, monoblock-reinforced pan system
Leaf reinforcementLock and hinge area reinforced with 3 mm (0.118") angle bar
Leaf thicknessBare metal 70 mm (2.76") — 90 mm (3.54") in total
Infill80 kg/m³ rock wool
Lock surroundintegrated with 1 mm (0.039") grade 304 stainless steel
Hinge3 adjustable 20 mm (0.787") ball-bearing pin hinges
Hinge reinforcement5 mm (0.197") thick flat bar
Fixed pin5 units on the hinge side, 20 mm (0.787") diameter
GasketSilicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf (insect-, dust- and airtight)
Surface finish10 mm (0.394") Camsan first-grade iroko
Finish optionsPowder coating, natural wood, marine plywood, iroko wood or composite compact laminate
VarnishPolyurethane infill, 90-micron coverage rating
PolishAkzo Nobel
Accessoriesfirst-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions)
InstallationOne-piece inner/outer frame, clamp-grip jointing, fastened with M8 bolts
Frame-to-wall gap1 cm (0.394"), filled with polyurethane foam
ProductionManufactured to custom on-site measurements
WarrantyUnlimited coverage for manufacturing defects — 2-year official warranty certificate
Lock systemOptional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock
Glass sectionvertically divided glass
Glass typeŞişecam 5+5 mm (0.394" total) laminated glass (impact resistant)

Frequently Asked Questions

What is the lead time for a custom villa door?

Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.

How are steel doors packaged for sea freight export?

Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.

What measurements do you need to quote?

The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.

Can you manufacture to imperial (inch) dimensions?

Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.

Who installs the door at the destination?

Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.

What export documents travel with the shipment?

Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.

You May Also Like

Before you decide

Pages where we cover the technical questions most often asked about this model:

classic design

More Models in This Style

View All

anthracite and grey

Models in the Same Color Family

View All