Custom manufacturing and worldwide export — request a quote: +90 532 689 21 46
Bayrakdoor Steel Doors
Bayrakdoor

Two-Section Paneled Dark Walnut Villa Door BD-TR64

Product CodeBD-TR64

Dark walnut panel with floral-rosette frosted glass strips at the sides. Product code: BD-TR64. Made to measure after a free on-site survey.

Leaf construction
single leaf + double sidelight + transom window
Color / finish
dark walnut
Handle
gold knocker and gold handle
Design language
classic villa
Upper section
paneled transom window
Share this model

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeBD-TR64

This is here to block automated submissions — it only takes a second.

  • Survey and measurement are free
  • Same-day response
  • Made in our own factory
  • Lifetime manufacturing warranty
Download this model's PDF spec sheet
Worldwide shipping & export
Made in our own factory
Lifetime manufacturing warranty

The two-section paneled dark walnut villa door, model BD-TR64, is built as a dark walnut panel leaf with floral-rosette frosted glass strips at the sides. Like every door we build, this model is made to measure; we never supply an off-the-shelf leaf.

Product Code: BD-TR64

Leaf, Glass and Top Section

The leaf structure is a single leaf with glass on both sides and a transom window. The leaf carries a two-section panel design. The finish is a dark walnut tone.

The glazing is resolved as frosted side panels with floral rosettes. Above sits a paneled transom window. A gold knocker and gold handle are used. Cladding and hardware are not fixed; the door can be produced with any of the alternatives on the cladding options page.

Its design language is best described as classic villa.

Which Entrances Does It Suit?

It is chosen above all for homes with gardens and residence apartments. It is designed for wide openings: the side sections both make up the width and bring light into the entrance. We compare where a villa door and a building entrance door part ways on the villa door vs. building entrance door page.

Measurement, Production and Installation

Production starts with measurements taken on site. How the door opening is measured is covered on the how measurements are taken page; material choices are on the galvanized or DKP sheet and lock systems pages. This model's technical values are in the table below. After installation, the care and lifespan and warranty and service terms apply.

Frequently Asked Questions

How is the price set for the BD-TR64?

There is no fixed price — since every leaf is built to measure, the total depends on size, cladding and lock choice. After the survey we send a written, itemized quote. The line items are detailed on the steel door prices page.

Can the color of the BD-TR64 be changed?

Yes, the color isn't fixed. The catalog shows dark walnut, but the cladding is decided per project; the cladding options page covers which surface works best where.

Can the glass on the BD-TR64 be changed?

Yes. The glass shown is this model's catalog finish; provided Şişecam 5+5 mm laminated glass is used, it can be produced in a different color and pattern. It can also be made without glass.

Do I need to take the measurements myself?

Our survey team measures on site. If you'd still like to know the process, the how measurements are taken page explains the three points we measure.

How can I order model BD-TR64?

You can fill in the pre-order form on our site or reach us on 0532 689 21 46. Mentioning product code BD-TR64 in your request speeds things up. You can browse other villa steel door models on the villa steel door models page.

Specifications

Product codeBD-TR64
CategoryVilla Steel Door Models
Leaf constructionsingle leaf + double sidelight + transom window
Color / finishdark walnut
Surface patterntwo-section panel
Handlegold knocker and gold handle
Upper sectionpaneled transom window
Design languageclassic villa
Access systemOptional card or keypad entry
Sheet thicknessFrame 2 mm (0.079"), leaf 1.5+1.5 mm (0.118" total) DKP steel sheet (Ereğli A1)
FrameEreğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent
Frame reinforcementLock and hinge areas reinforced with 3 mm (0.118") DKP steel sheet
LeafEreğli A1 grade 1.5 mm (0.059") + 1.5 mm (0.059") omega-bent, monoblock-reinforced pan system
Leaf reinforcementLock and hinge area reinforced with 3 mm (0.118") angle bar
Leaf thicknessBare metal 70 mm (2.76") — 90 mm (3.54") in total
Infill80 kg/m³ rock wool
Lock surroundintegrated with 1 mm (0.039") grade 304 stainless steel
Hinge3 adjustable 20 mm (0.787") ball-bearing pin hinges
Hinge reinforcement5 mm (0.197") thick flat bar
Fixed pin5 units on the hinge side, 20 mm (0.787") diameter
GasketSilicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf (insect-, dust- and airtight)
Surface finish10 mm (0.394") Camsan first-grade iroko
Finish optionsPowder coating, natural wood, marine plywood, iroko wood or composite compact laminate
VarnishPolyurethane infill, 90-micron coverage rating
PolishAkzo Nobel
Accessoriesfirst-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions)
InstallationOne-piece inner/outer frame, clamp-grip jointing, fastened with M8 bolts
Frame-to-wall gap1 cm (0.394"), filled with polyurethane foam
ProductionManufactured to custom on-site measurements
WarrantyUnlimited coverage for manufacturing defects — 2-year official warranty certificate
Lock systemOptional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock
Glass sectionfrosted side glass with floral rosettes
Glass typeŞişecam 5+5 mm (0.394" total) laminated glass (impact resistant)

Frequently Asked Questions

What is the lead time for a custom villa door?

Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.

How are steel doors packaged for sea freight export?

Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.

What measurements do you need to quote?

The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.

Can you manufacture to imperial (inch) dimensions?

Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.

Who installs the door at the destination?

Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.

What export documents travel with the shipment?

Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.

You May Also Like

Before you decide

Pages where we cover the technical questions most often asked about this model:

classic design

More Models in This Style

View All

wood tone

Models in the Same Color Family

View All