Custom manufacturing and worldwide export — request a quote: +90 532 689 21 46
Bayrakdoor Steel Doors
Bayrakdoor

Bronze Scroll Honey Wood Building Entrance Door TR508

Product CodeTR508

Vertical glass panels with bronze-toned wrought iron on a honey body. Product code: TR508. Made to measure after an on-site survey.

Leaf construction
double leaf
Color / finish
honey-toned wood
Handle
long straight stainless steel handle
Design language
classic wrought-iron
Share this model

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeTR508

This is here to block automated submissions — it only takes a second.

  • Survey and measurement are free
  • Same-day response
  • Made in our own factory
  • Lifetime manufacturing warranty
Download this model's PDF spec sheet
Worldwide shipping & export
Made in our own factory
Lifetime manufacturing warranty

Vertical glass panels with bronze-toned wrought iron on a honey body — that is what sets building entrance door model TR508 apart. It is not sold in standard sizes; your entrance is measured on site and the leaf is built to that measurement.

Product Code: TR508

Surface and Glass Section

The leaf structure is double leaf. The leaf carries a bronze scroll motif. The finish is in a honey wood tone.

The glass layout is resolved as vertical glass panels with gold-bronze wrought iron over a dark ground. It is finished with a long straight stainless steel handle. The finish shown is the catalogue selection — a different cladding can be chosen from the cladding options.

The design language is best described as classic wrought iron.

Which Entrances Does It Suit?

It is most often used for commercial building entrances and apartment building entrances. Thanks to the side sections, wide door openings are closed with a single assembly. We compare where a villa door and a building entrance door differ on the villa door vs building entrance door page.

Production and Installation

We take the measurements during the on-site survey — based on the door opening, not the existing leaf; the method is explained on the how to measure page. You can find this model's frame, leaf and lock specifications in the table below; the lock systems and galvanized or DKP sheet steel pages detail the options. After delivery, warranty and service coverage applies; see the care and lifespan page for keeping the surface in good condition.

Frequently Asked Questions

How much does TR508 cost?

We cannot quote a price before measuring. The size of the opening and your cladding, glass and lock choices directly affect the amount; the survey is free and is followed by an itemized quote. See steel door prices for details.

Can TR508 be produced in a different colour?

Yes. The honey wood finish shown is this model's catalogue selection; it can be produced in different colours with compact laminate, composite, marine plywood and wood veneer options. We compare the alternatives on the cladding options page.

Can the glass on TR508 be changed?

Yes. The glass shown is this model's catalogue finish; it can be produced in a different colour or pattern, provided Şişecam 5+5 mm laminated glass is used. It can also be produced without glass.

How is TR508 measured?

Measuring is our job. We measure the clear width of the opening, the height from the finished floor and the wall thickness; the details are on the how to measure page.

How can I order model TR508?

You can fill in the pre-order form on our website or call us on 0532 689 21 46. Quoting product code TR508 in your request helps us respond faster. You can browse our other building entrance door models on the building entrance door models page.

Specifications

Product codeTR508
CategoryBuilding Entrance Steel Door Models
Leaf constructiondouble leaf
Color / finishhoney-toned wood
Surface patternbronze scroll motif
Handlelong straight stainless steel handle
Design languageclassic wrought-iron
Push-to-open systemself-closing system within 6 seconds
Door closersize 5 door closer
Access systemOptional card or keypad entry
Sheet thicknessFrame 2 mm (0.079"), leaf 1.5+1.5 mm (0.118" total) DKP steel sheet (Ereğli A1)
FrameEreğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent
Frame reinforcementLock and hinge areas reinforced with 3 mm (0.118") DKP steel sheet
LeafEreğli A1 grade 1.5 mm (0.059") + 1.5 mm (0.059") omega-bent, monoblock-reinforced pan system
Leaf reinforcementLock and hinge area reinforced with 3 mm (0.118") angle bar
Leaf thicknessBare metal 70 mm (2.76") — 90 mm (3.54") in total
Infill80 kg/m³ rock wool
Lock surroundintegrated with 1 mm (0.039") grade 304 stainless steel
Hinge3 adjustable 20 mm (0.787") ball-bearing pin hinges
Hinge reinforcement5 mm (0.197") thick flat bar
Fixed pin5 units on the hinge side, 20 mm (0.787") diameter
GasketSilicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf (insect-, dust- and airtight)
Surface finish10 mm (0.394") Camsan first-grade iroko
Finish optionsPowder coating, natural wood, marine plywood, iroko wood or composite compact laminate
VarnishPolyurethane infill, 90-micron coverage rating
PolishAkzo Nobel
Accessoriesfirst-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions)
InstallationOne-piece inner/outer frame, clamp-grip jointing, fastened with M8 bolts
Frame-to-wall gap1 cm (0.394"), filled with polyurethane foam
ProductionManufactured to custom on-site measurements
WarrantyUnlimited coverage for manufacturing defects — 2-year official warranty certificate
Lock systemOptional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock
Glass sectiongold-bronze wrought iron vertical glass panels on a dark background
Glass typeŞişecam 5+5 mm (0.394" total) laminated glass (impact resistant)

Frequently Asked Questions

What is the lead time for a custom villa door?

Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.

How are steel doors packaged for sea freight export?

Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.

What measurements do you need to quote?

The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.

Can you manufacture to imperial (inch) dimensions?

Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.

Who installs the door at the destination?

Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.

What export documents travel with the shipment?

Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.

You May Also Like

Before you decide

Pages where we cover the technical questions most often asked about this model:

classic design

More Models in This Style

View All

wood tone

Models in the Same Color Family

View All