Anthracite grey body with silver wrought iron side panels over black glass and a stepped run of horizontal stainless steel bars. Product code: TR500. Made to measure after an on-site survey.
- Leaf construction
- single leaf + double sidelight
- Color / finish
- anthracite grey
- Handle
- horizontal stainless steel pull bar
- Design language
- modern wrought-iron
- Upper section
- black transom window
Pre-Order & Price Request
This model is made to measure. Leave your request and we'll call you to arrange a site survey.
- Survey and measurement are free
- Same-day response
- Made in our own factory
- Lifetime manufacturing warranty
This building entrance door model carries the code TR500: an anthracite grey body with silver wrought iron side panels over black glass and a stepped run of horizontal stainless steel bars. Every door is made to your dimensions; whatever the width and height of your entrance, the leaf is produced to match.
Product Code: TR500
Leaf, Glazing and Transom
The leaf structure is a single leaf with twin side glass. The center leaf carries a row of horizontal stainless steel bars. The finish is an anthracite grey tone.
The model features two vertical side lights with silver wrought iron motifs on a black ground. Above sits a black transom window. The handle is a horizontal stainless steel pull. Cladding and hardware are not fixed; the door can be produced with any of the alternatives on our cladding options page.
Its design language is defined as modern wrought iron.
Which Entrances Suit This Model?
Commercial building entrances and housing developments are where this model is typically used. It is designed for wide openings: the side sections both take up the extra width and bring light into the entrance. We compare where a villa door differs from a building entrance door on our villa door vs. building entrance door page.
Measurement, Production and Installation
Measurements are taken from the door opening, not the existing leaf; we describe the process step by step on our how to measure page. Frame, sheet thickness, infill and lock values are listed in the specification table below. Sheet steel choices are compared on the galvanized or DKP sheet steel page, lock alternatives on the lock systems page. Maintenance steps that extend the door's life are on the care and lifespan page, and the coverage itself on the warranty and service page.
Frequently Asked Questions
How much does the TR500 model cost?
We do not publish a list price, because each door is made to measure. The total is set by the size of the opening and the cladding, glass and lock you select. After a free survey we provide a written quote itemized line by line; what moves the price is explained on our steel door prices page.
Can I order this model in a color other than anthracite grey?
It can be done. Anthracite grey is only the finish photographed, not a fixed choice — you can pick from the alternatives on our cladding options page.
Can the glass in the TR500 be changed?
Yes. The glass shown is this model's catalog finish; it can be produced in different colors and patterns, provided Şişecam 5+5 mm laminated glass is used. A glassless version is also possible.
How does the measuring stage work when ordering the TR500?
Our survey team measures on site. If you would still like to know the process, our how to measure page explains the three points we measure from.
How can I order the TR500 model?
You can fill out the pre-order form on our site or reach us at 0532 689 21 46. Mentioning product code TR500 in your request speeds things up. You can browse other building entrance door models on our building entrance door models page.
Specifications
| Product code | TR500 |
| Category | Building Entrance Steel Door Models |
| Leaf construction | single leaf + double sidelight |
| Color / finish | anthracite grey |
| Surface pattern | row of horizontal stainless steel bars on center leaf |
| Handle | horizontal stainless steel pull bar |
| Upper section | black transom window |
| Design language | modern wrought-iron |
| Push-to-open system | self-closing system within 6 seconds |
| Door closer | size 5 door closer |
| Access system | Optional card or keypad entry |
| Sheet thickness | Frame 2 mm (0.079"), leaf 1.5+1.5 mm (0.118" total) DKP steel sheet (Ereğli A1) |
| Frame | Ereğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent |
| Frame reinforcement | Lock and hinge areas reinforced with 3 mm (0.118") DKP steel sheet |
| Leaf | Ereğli A1 grade 1.5 mm (0.059") + 1.5 mm (0.059") omega-bent, monoblock-reinforced pan system |
| Leaf reinforcement | Lock and hinge area reinforced with 3 mm (0.118") angle bar |
| Leaf thickness | Bare metal 70 mm (2.76") — 90 mm (3.54") in total |
| Infill | 80 kg/m³ rock wool |
| Lock surround | integrated with 1 mm (0.039") grade 304 stainless steel |
| Hinge | 3 adjustable 20 mm (0.787") ball-bearing pin hinges |
| Hinge reinforcement | 5 mm (0.197") thick flat bar |
| Fixed pin | 5 units on the hinge side, 20 mm (0.787") diameter |
| Gasket | Silicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf (insect-, dust- and airtight) |
| Surface finish | 10 mm (0.394") Camsan first-grade iroko |
| Finish options | Powder coating, natural wood, marine plywood, iroko wood or composite compact laminate |
| Varnish | Polyurethane infill, 90-micron coverage rating |
| Polish | Akzo Nobel |
| Accessories | first-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions) |
| Installation | One-piece inner/outer frame, clamp-grip jointing, fastened with M8 bolts |
| Frame-to-wall gap | 1 cm (0.394"), filled with polyurethane foam |
| Production | Manufactured to custom on-site measurements |
| Warranty | Unlimited coverage for manufacturing defects — 2-year official warranty certificate |
| Lock system | Optional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock |
| Glass section | two vertical sidelights with silver wrought iron motif on black background |
| Glass type | Şişecam 5+5 mm (0.394" total) laminated glass (impact resistant) |
Frequently Asked Questions
What is the lead time for a custom villa door?
Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.
How are steel doors packaged for sea freight export?
Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.
What measurements do you need to quote?
The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.
Can you manufacture to imperial (inch) dimensions?
Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.
Who installs the door at the destination?
Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.
What export documents travel with the shipment?
Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.
- • A free on-site survey is carried out before ordering to measure the door opening.
- • Production follows the dimensions and finish you approve after the survey.
- • Installation is carried out on-site by our own team.
- • Our warranty against manufacturing and workmanship defects is unlimited; an official 2-year warranty document is provided on delivery.
- • Price incl. VAT: %20 Includes VAT.
You May Also Like

Symmetric Baroque Walnut Wood Building Entrance Door TR501

Diamond Geometric Walnut Wood Building Entrance Door TR502

Horizontal Stainless Deep Russet-Brown Building Entrance Door TR503

Wrought Iron Floral Black Anthracite Building Entrance Door TR504
Before you decide
Pages where we cover the technical questions most often asked about this model:
modern design
More Models in This Style

Geometric Diamond Orange Red Walnut Steel Door C-TR730

Diamond-Motif Dark Brown Steel Door C-TR726

Circle Medallion Dark Burgundy Brown Steel Door C-TR720

Tall Vertical Dark Burgundy Gloss Steel Door C-TR718
anthracite and grey
Models in the Same Color Family

Fine Horizontal Anthracite Gray Building Entrance Door TR526

Stainless-Frame Anthracite Grey Building Entrance Door TR523

Horizontal Stainless Anthracite Grey Metallic Building Entrance Door TR511

