Custom manufacturing and worldwide export — request a quote: +90 532 689 21 46
Bayrakdoor Steel Doors
Bayrakdoor

Classic Walnut Building Entrance Door with Paneled Lower Section TR505

Product CodeTR505

Classic walnut paneled body, square-grid divided glass and an arched top light. Product code: TR505. Made to measure after an on-site survey.

Leaf construction
double leaf + twin side glass
Color / finish
classic walnut
Handle
classic long handle
Design language
classic
Share this model

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeTR505

This is here to block automated submissions — it only takes a second.

  • Survey and measurement are free
  • Same-day response
  • Made in our own factory
  • Lifetime manufacturing warranty
Download this model's PDF spec sheet
Worldwide shipping & export
Made in our own factory
Lifetime manufacturing warranty

The classic walnut building entrance door with paneled lower section, code TR505, is built with a classic walnut paneled body, square-grid divided glass and an arched top light. Like every door we make, this model is produced to measure; no ready-made leaf is supplied from stock. The image shows a classic walnut finish.

Product Code: TR505

Leaf and Glass Layout

It is produced as a double leaf with two side glass panels. The surface is worked with embossed panels in the lower section. The surface is finished in classic walnut.

The glazing is arranged as square-grid divided glass. A classic long handle is used. Cladding and hardware are not fixed; the door can be produced with any of the alternatives on the cladding options page.

The design language is defined as classic.

Where Is It Used?

It is chosen first and foremost for housing developments and apartment building entrances. It is conceived for wide openings: the side sections both make up the width and bring light into the entrance. The difference between these two types is not just size; we detail it on the difference between villa doors and building entrance doors page.

Measurement, Production and Installation

We take the measurements during the survey — the door opening is the reference, not the existing leaf; the method is explained on the how measurements are taken page. You will find this model's frame, leaf and lock specifications in the table below; the lock systems and galvanized or DKP sheet steel pages detail the options. After installation, the care and lifespan and warranty and service terms apply.

Frequently Asked Questions

How much is the TR505?

The price cannot be quoted before measuring. The size of the door opening and your cladding, glass and lock choices directly affect the total; the survey is free of charge and is followed by an itemized quote. See steel door prices for details.

Can I have this model in a color other than classic walnut?

It can. Classic walnut is only the finish in the photo, not a fixed choice — you can pick from the alternatives on the cladding options page.

Can the glass pattern be different?

Yes. The glass shown is this model's catalog finish; provided Şişecam 5+5 mm laminated glass is used, it can be produced in different colors and patterns. It can also be made without glass.

How does the measuring stage work when ordering the TR505?

We take the measurements during the survey; nothing is required on your part. Measurements come from the door opening, not the existing leaf — the method is described on the how measurements are taken page.

How do I get a quote for the TR505?

You can fill in the pre-order form on our site or call us on 0532 689 21 46. Mentioning product code TR505 in your request speeds the process up. You can browse other building entrance door models on the building entrance door models page.

Specifications

Product codeTR505
CategoryBuilding Entrance Steel Door Models
Leaf constructiondouble leaf + twin side glass
Color / finishclassic walnut
Surface patternembossed panel (cassette panel) on the lower section
Handleclassic long handle
Design languageclassic
Push-to-open systemself-closing system within 6 seconds
Door closersize 5 door closer
Access systemOptional card or keypad entry
Sheet thicknessFrame 2 mm (0.079"), leaf 1.5+1.5 mm (0.118" total) DKP steel sheet (Ereğli A1)
FrameEreğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent
Frame reinforcementLock and hinge areas reinforced with 3 mm (0.118") DKP steel sheet
LeafEreğli A1 grade 1.5 mm (0.059") + 1.5 mm (0.059") omega-bent, monoblock-reinforced pan system
Leaf reinforcementLock and hinge area reinforced with 3 mm (0.118") angle bar
Leaf thicknessBare metal 70 mm (2.76") — 90 mm (3.54") in total
Infill80 kg/m³ rock wool
Lock surroundintegrated with 1 mm (0.039") grade 304 stainless steel
Hinge3 adjustable 20 mm (0.787") ball-bearing pin hinges
Hinge reinforcement5 mm (0.197") thick flat bar
Fixed pin5 units on the hinge side, 20 mm (0.787") diameter
GasketSilicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf (insect-, dust- and airtight)
Surface finish10 mm (0.394") Camsan first-grade iroko
Finish optionsPowder coating, natural wood, marine plywood, iroko wood or composite compact laminate
VarnishPolyurethane infill, 90-micron coverage rating
PolishAkzo Nobel
Accessoriesfirst-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions)
InstallationOne-piece inner/outer frame, clamp-grip jointing, fastened with M8 bolts
Frame-to-wall gap1 cm (0.394"), filled with polyurethane foam
ProductionManufactured to custom on-site measurements
WarrantyUnlimited coverage for manufacturing defects — 2-year official warranty certificate
Lock systemOptional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock
Glass sectionsquare honeycomb-divided glass panels
Glass typeŞişecam 5+5 mm (0.394" total) laminated glass (impact resistant)

Frequently Asked Questions

What is the lead time for a custom villa door?

Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.

How are steel doors packaged for sea freight export?

Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.

What measurements do you need to quote?

The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.

Can you manufacture to imperial (inch) dimensions?

Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.

Who installs the door at the destination?

Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.

What export documents travel with the shipment?

Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.

You May Also Like

Before you decide

Pages where we cover the technical questions most often asked about this model:

classic design

More Models in This Style

View All

wood tone

Models in the Same Color Family

View All