Custom manufacturing and worldwide export — request a quote: +90 532 689 21 46
Bayrakdoor Steel Doors
Bayrakdoor

Clean-Lined Anthracite Grey Villa Door BD-TR60

Product CodeBD-TR60

Completely plain anthracite surface with a single detail: a long vertical wooden handle. Product code: BD-TR60. Made to measure after an on-site survey.

Leaf construction
single leaf + double sidelight
Color / finish
anthracite grey
Handle
long vertical wood handle
Design language
modern villa
Share this model

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeBD-TR60

This is here to block automated submissions — it only takes a second.

  • Survey and measurement are free
  • Same-day response
  • Made in our own factory
  • Lifetime manufacturing warranty
Download this model's PDF spec sheet
Worldwide shipping & export
Made in our own factory
Lifetime manufacturing warranty

A completely plain anthracite surface with a single detail — a long vertical wooden handle. That is what sets this villa steel door, code BD-TR60, apart. There is no standard size — the door opening is measured during the survey and production follows that measurement.

Product Code: BD-TR60

Surface and Glazing

The leaf structure is a single leaf with twin side glass. The leaf carries a completely flat, unadorned surface. The finish is an anthracite grey tone.

The glazing takes the form of floor-to-ceiling side lights. A long vertical wooden handle was chosen for this model. Color, pattern and handle choices can be tailored to your project; the cladding options page compares what is available.

Its design language is defined as modern villa.

Which Entrances Suit This Model?

It is generally used in garden homes and detached houses. Thanks to the side sections, wide door openings are closed with a single assembly. We compare where a villa door differs from a building entrance door on our villa door vs. building entrance door page.

Production and Installation Process

We take the measurements during the survey — based on the door opening, not the existing leaf; the method is explained on our how to measure page. You will find this model's frame, leaf and lock values in the table below; the lock systems and galvanized or DKP sheet steel pages detail the options. Maintenance steps that extend the door's life are on the care and lifespan page, and the coverage itself on the warranty and service page.

Frequently Asked Questions

How much is the BD-TR60?

The price cannot be quoted before measuring. The opening's dimensions and your cladding, glass and lock choices directly affect the total; the survey is free and is followed by an itemized quote. See steel door prices for details.

Can I order this model in a color other than anthracite grey?

Yes. The anthracite grey finish in the image is this model's catalog selection; it can be produced in other colors with compact laminate, composite, marine plywood and wood veneer options. We compare them on our cladding options page.

Can the glass in the BD-TR60 be changed?

Yes. The glass shown is this model's catalog finish; it can be produced in different colors and patterns, provided Şişecam 5+5 mm laminated glass is used. A glassless version is also possible.

How is the BD-TR60 measured?

Measuring is our job. We take the clear width of the opening, the height from the finished floor and the wall thickness; details on our how to measure page.

How can I order the BD-TR60 model?

You can fill out the pre-order form on our site or reach us at 0532 689 21 46. Mentioning product code BD-TR60 in your request speeds things up. You can browse other villa steel door models on our villa steel door models page.

Specifications

Product codeBD-TR60
CategoryVilla Steel Door Models
Leaf constructionsingle leaf + double sidelight
Color / finishanthracite grey
Surface patterncompletely flat plain surface
Handlelong vertical wood handle
Design languagemodern villa
Access systemOptional card or keypad entry
Sheet thicknessFrame 2 mm (0.079"), leaf 1.5+1.5 mm (0.118" total) DKP steel sheet (Ereğli A1)
FrameEreğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent
Frame reinforcementLock and hinge areas reinforced with 3 mm (0.118") DKP steel sheet
LeafEreğli A1 grade 1.5 mm (0.059") + 1.5 mm (0.059") omega-bent, monoblock-reinforced pan system
Leaf reinforcementLock and hinge area reinforced with 3 mm (0.118") angle bar
Leaf thicknessBare metal 70 mm (2.76") — 90 mm (3.54") in total
Infill80 kg/m³ rock wool
Lock surroundintegrated with 1 mm (0.039") grade 304 stainless steel
Hinge3 adjustable 20 mm (0.787") ball-bearing pin hinges
Hinge reinforcement5 mm (0.197") thick flat bar
Fixed pin5 units on the hinge side, 20 mm (0.787") diameter
GasketSilicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf (insect-, dust- and airtight)
Surface finish10 mm (0.394") Camsan first-grade iroko
Finish optionsPowder coating, natural wood, marine plywood, iroko wood or composite compact laminate
VarnishPolyurethane infill, 90-micron coverage rating
PolishAkzo Nobel
Accessoriesfirst-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions)
InstallationOne-piece inner/outer frame, clamp-grip jointing, fastened with M8 bolts
Frame-to-wall gap1 cm (0.394"), filled with polyurethane foam
ProductionManufactured to custom on-site measurements
WarrantyUnlimited coverage for manufacturing defects — 2-year official warranty certificate
Lock systemOptional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock
Glass sectionfloor-to-ceiling side glass
Glass typeŞişecam 5+5 mm (0.394" total) laminated glass (impact resistant)

Frequently Asked Questions

What is the lead time for a custom villa door?

Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.

How are steel doors packaged for sea freight export?

Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.

What measurements do you need to quote?

The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.

Can you manufacture to imperial (inch) dimensions?

Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.

Who installs the door at the destination?

Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.

What export documents travel with the shipment?

Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.

You May Also Like

Before you decide

Pages where we cover the technical questions most often asked about this model:

modern design

More Models in This Style

View All

anthracite and grey

Models in the Same Color Family

View All