Light grey clean-lined leaf with side glass and an upper transom window, set against a timber-slatted facade. Product code: BD-TR95. Made to measure after an on-site survey.
- Leaf construction
- single leaf + sidelight + transom window
- Color / finish
- light grey
- Handle
- long vertical stainless steel handle
- Design language
- modern villa
- Upper section
- glazed transom window
Pre-Order & Price Request
This model is made to measure. Leave your request and we'll call you to arrange a site survey.
- Survey and measurement are free
- Same-day response
- Made in our own factory
- Lifetime manufacturing warranty
A light grey clean-lined leaf with side glass and an upper transom window, set against a timber-slatted facade. Listed in our catalog under code BD-TR95. There is no standard size — the door opening is measured during the survey and production follows that measurement.
Product Code: BD-TR95
Leaf, Glazing and Transom
The leaf structure is a single leaf with side glass and a transom window. The leaf carries a flat, unadorned surface. The finish is a light grey tone.
The glazing takes the form of a narrow vertical side light. The upper section holds a glazed transom window. The handle is a long vertical stainless steel pull. Color, pattern and handle choices can be tailored to your project; the cladding options page compares what is available.
Its design language is defined as modern villa.
Which Entrances Suit This Model?
It is chosen primarily for garden homes and villa entrances. Because the side sections extend the opening, it suits wide-fronted entrances rather than narrow ones — and brings daylight into the hall. We compare where a villa door differs from a building entrance door on our villa door vs. building entrance door page.
Measurement, Production and Installation
Measurements are taken from the door opening, not the existing leaf; we describe the process step by step on our how to measure page. Frame, sheet thickness, infill and lock values are listed in the specification table below. Sheet steel choices are compared on the galvanized or DKP sheet steel page, lock alternatives on the lock systems page. Maintenance steps that extend the door's life are on the care and lifespan page, and the coverage itself on the warranty and service page.
Frequently Asked Questions
How much does the BD-TR95 model cost?
There is no fixed price — since every leaf is made to measure, the total depends on the dimensions, the cladding and the lock you choose. After the survey we send a written, itemized quote. We break down the cost items on our steel door prices page.
Can I order this model in a color other than light grey?
Yes — the color is not fixed. The catalog shows light grey, but the cladding is decided per project; on our cladding options page we cover which surface works best where.
Can the glass in the BD-TR95 be changed?
Yes. The glass shown is this model's catalog finish; it can be produced in different colors and patterns, provided Şişecam 5+5 mm laminated glass is used. A glassless version is also possible.
How is the BD-TR95 measured?
We take the measurements during the survey; nothing is required from you. Measurements come from the door opening, not the existing leaf — the method is described on our how to measure page.
How can I order the BD-TR95 model?
You can fill out the pre-order form on our site or reach us at 0532 689 21 46. Mentioning product code BD-TR95 in your request speeds things up. You can browse other villa steel door models on our villa steel door models page.
Specifications
| Product code | BD-TR95 |
| Category | Villa Steel Door Models |
| Leaf construction | single leaf + sidelight + transom window |
| Color / finish | light grey |
| Surface pattern | smooth plain surface |
| Handle | long vertical stainless steel handle |
| Upper section | glazed transom window |
| Design language | modern villa |
| Access system | Optional card or keypad entry |
| Sheet thickness | Frame 2 mm (0.079"), leaf 1.5+1.5 mm (0.118" total) DKP steel sheet (Ereğli A1) |
| Frame | Ereğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent |
| Frame reinforcement | Lock and hinge areas reinforced with 3 mm (0.118") DKP steel sheet |
| Leaf | Ereğli A1 grade 1.5 mm (0.059") + 1.5 mm (0.059") omega-bent, monoblock-reinforced pan system |
| Leaf reinforcement | Lock and hinge area reinforced with 3 mm (0.118") angle bar |
| Leaf thickness | Bare metal 70 mm (2.76") — 90 mm (3.54") in total |
| Infill | 80 kg/m³ rock wool |
| Lock surround | integrated with 1 mm (0.039") grade 304 stainless steel |
| Hinge | 3 adjustable 20 mm (0.787") ball-bearing pin hinges |
| Hinge reinforcement | 5 mm (0.197") thick flat bar |
| Fixed pin | 5 units on the hinge side, 20 mm (0.787") diameter |
| Gasket | Silicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf (insect-, dust- and airtight) |
| Surface finish | 10 mm (0.394") Camsan first-grade iroko |
| Finish options | Powder coating, natural wood, marine plywood, iroko wood or composite compact laminate |
| Varnish | Polyurethane infill, 90-micron coverage rating |
| Polish | Akzo Nobel |
| Accessories | first-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions) |
| Installation | One-piece inner/outer frame, clamp-grip jointing, fastened with M8 bolts |
| Frame-to-wall gap | 1 cm (0.394"), filled with polyurethane foam |
| Production | Manufactured to custom on-site measurements |
| Warranty | Unlimited coverage for manufacturing defects — 2-year official warranty certificate |
| Lock system | Optional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock |
| Glass section | narrow vertical side glass |
| Glass type | Şişecam 5+5 mm (0.394" total) laminated glass (impact resistant) |
Frequently Asked Questions
What is the lead time for a custom villa door?
Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.
How are steel doors packaged for sea freight export?
Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.
What measurements do you need to quote?
The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.
Can you manufacture to imperial (inch) dimensions?
Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.
Who installs the door at the destination?
Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.
What export documents travel with the shipment?
Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.
- • A free on-site survey is carried out before ordering to measure the door opening.
- • Production follows the dimensions and finish you approve after the survey.
- • Installation is carried out on-site by our own team.
- • Our warranty against manufacturing and workmanship defects is unlimited; an official 2-year warranty document is provided on delivery.
- • Price incl. VAT: %20 Includes VAT.
You May Also Like
Before you decide
Pages where we cover the technical questions most often asked about this model:
modern design
More Models in This Style

Geometric Diamond Orange Red Walnut Steel Door C-TR730

Diamond-Motif Dark Brown Steel Door C-TR726

Circle Medallion Dark Burgundy Brown Steel Door C-TR720

Tall Vertical Dark Burgundy Gloss Steel Door C-TR718
anthracite and grey
Models in the Same Color Family

Fine Horizontal Anthracite Gray Building Entrance Door TR526

Stainless-Frame Anthracite Grey Building Entrance Door TR523

Horizontal Stainless Anthracite Grey Metallic Building Entrance Door TR511





