Custom manufacturing and worldwide export — request a quote: +90 532 689 21 46
Bayrakdoor Steel Doors
Bayrakdoor

Dense Baroque White Building Entrance Door TR537

Product CodeTR537

White body with dense silver wrought-iron scrollwork over navy-blue glass. Product code: TR537. Manufactured to measure, following an on-site survey.

Leaf construction
double leaf
Color / finish
white
Handle
curved stainless steel handle
Design language
classic wrought-iron
Share this model

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeTR537

This is here to block automated submissions — it only takes a second.

  • Survey and measurement are free
  • Same-day response
  • Made in our own factory
  • Lifetime manufacturing warranty
Download this model's PDF spec sheet
Worldwide shipping & export
Made in our own factory
Lifetime manufacturing warranty

TR537 is a building entrance door model distinguished by dense silver wrought-iron scrollwork over navy-blue glass, set on a white body. It isn't sold in ready-made sizes; your entrance is measured on site and the leaf is manufactured to that measurement.

Product Code: TR537

Glass and Surface Details

The leaf layout is a double leaf. The leaf surface is worked in dense baroque wrought-iron scrollwork. The catalog color is a white tone.

The glazing takes the form of glass with dense silver wrought-iron scrollwork over a navy-blue ground. It's finished with a curved stainless handle. Cladding and hardware aren't fixed; it can be produced with the alternatives on our cladding options page.

The design language is described as classic wrought-iron.

Who Is This Model For?

Apartment building entrances and housing-estate blocks are the typical settings for this model. Thanks to the side sections, wide door openings are covered by a single, unified design. We've compared where a villa door and a building entrance door part ways on our villa door vs. building entrance door page.

Production and Installation Process

Measurements are taken from the door opening, not the existing leaf — we've written up the step-by-step method on our how measurements are taken page. Frame, steel thickness, infill and lock specifications are listed in the feature table below. The steel choice is compared on our galvanized vs. cold-rolled steel page, and lock alternatives on our lock systems page. After installation, our care and lifespan and warranty and service terms apply.

Frequently Asked Questions

How much does TR537 cost?

We don't publish a list price, because the door is built to measure. The amount is set by the size of the door opening plus the cladding, glass and lock you choose. After a free survey, we provide a written, itemized quote; we've explained what affects the price on our steel door prices page.

Can TR537 be made in a different color?

It can be. White is simply the finish shown in the photo, not a fixed choice — you can pick from the alternatives on our cladding options page.

Can the glass be changed on the TR537 model?

Yes. The glass shown is this model's catalog finish; it can be produced in a different color and pattern as long as Şişecam 5+5 mm laminated glass is used. A version without glass is also possible.

How is the measurement taken for TR537?

Our survey team measures on site. If you'd still like to understand the process, we've written up the three points we measure on our how measurements are taken page.

How can I order the TR537 model?

You can fill out the pre-order form on the site, or reach us at 0532 689 21 46. Mentioning the TR537 product code in your request speeds up the process. You can browse other building entrance door models on our building entrance door models page.

Specifications

Product codeTR537
CategoryBuilding Entrance Steel Door Models
Leaf constructiondouble leaf
Color / finishwhite
Surface patterndense baroque wrought iron
Handlecurved stainless steel handle
Design languageclassic wrought-iron
Push-to-open systemself-closing system within 6 seconds
Door closersize 5 door closer
Access systemOptional card or keypad entry
Sheet thicknessFrame 2 mm (0.079"), leaf 1.5+1.5 mm (0.118" total) DKP steel sheet (Ereğli A1)
FrameEreğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent
Frame reinforcementLock and hinge areas reinforced with 3 mm (0.118") DKP steel sheet
LeafEreğli A1 grade 1.5 mm (0.059") + 1.5 mm (0.059") omega-bent, monoblock-reinforced pan system
Leaf reinforcementLock and hinge area reinforced with 3 mm (0.118") angle bar
Leaf thicknessBare metal 70 mm (2.76") — 90 mm (3.54") in total
Infill80 kg/m³ rock wool
Lock surroundintegrated with 1 mm (0.039") grade 304 stainless steel
Hinge3 adjustable 20 mm (0.787") ball-bearing pin hinges
Hinge reinforcement5 mm (0.197") thick flat bar
Fixed pin5 units on the hinge side, 20 mm (0.787") diameter
GasketSilicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf (insect-, dust- and airtight)
Surface finish10 mm (0.394") Camsan first-grade iroko
Finish optionsPowder coating, natural wood, marine plywood, iroko wood or composite compact laminate
VarnishPolyurethane infill, 90-micron coverage rating
PolishAkzo Nobel
Accessoriesfirst-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions)
InstallationOne-piece inner/outer frame, clamp-grip jointing, fastened with M8 bolts
Frame-to-wall gap1 cm (0.394"), filled with polyurethane foam
ProductionManufactured to custom on-site measurements
WarrantyUnlimited coverage for manufacturing defects — 2-year official warranty certificate
Lock systemOptional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock
Glass sectionglass panes with dense silver wrought iron scrolls on navy blue ground
Glass typeŞişecam 5+5 mm (0.394" total) laminated glass (impact resistant)

Frequently Asked Questions

What is the lead time for a custom villa door?

Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.

How are steel doors packaged for sea freight export?

Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.

What measurements do you need to quote?

The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.

Can you manufacture to imperial (inch) dimensions?

Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.

Who installs the door at the destination?

Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.

What export documents travel with the shipment?

Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.

You May Also Like

Before you decide

Pages where we cover the technical questions most often asked about this model:

classic design

More Models in This Style

View All

white and cream

Models in the Same Color Family

View All