Custom manufacturing and worldwide export — request a quote: +90 532 689 21 46
Bayrakdoor Steel Doors
Bayrakdoor

Fine Vertical Smoke Anthracite Villa Door BD-TR66

Product CodeBD-TR66

A smoke grey vertically striped leaf beside a frosted window with a colorful abstract pattern. Product code: BD-TR66. Made to measure after an on-site survey.

Leaf construction
single leaf + sidelight
Color / finish
smoke grey-anthracite
Handle
recessed pull bar
Design language
designer villa
Share this model

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeBD-TR66

This is here to block automated submissions — it only takes a second.

  • Survey and measurement are free
  • Same-day response
  • Made in our own factory
  • Lifetime manufacturing warranty
Download this model's PDF spec sheet
Worldwide shipping & export
Made in our own factory
Lifetime manufacturing warranty

BD-TR66 is a villa steel door model distinguished by its smoke grey vertically striped leaf and the frosted side window with a colorful abstract pattern. It is not sold in stock sizes; your entrance is measured on site and the leaf is built to that measurement. The catalog finish is a smoke anthracite tone.

Product Code: BD-TR66

Leaf and Glass Layout

The layout is a single leaf with a side window. The leaf surface is worked with fine vertical strips. The catalog color is a smoke anthracite tone.

The glazing is a frosted side window with a colorful abstract pattern. A recessed pull completes the model. Color, pattern and handle choices can all be tailored to your project; the options are compared on our surface finish options page.

The design language is best described as designer villa.

Who Is This Model For?

It is typically used on villa entrances and detached homes. Because the side sections widen the opening, it suits broad-fronted entrances rather than narrow ones — and brings daylight into the hallway. We compare where a villa door and a building entrance door differ on the villa door vs. building entrance door page.

From Measurement to Installation

We take the measurements during the survey — working from the door opening, not the existing leaf; the method is explained on the how measurements are taken page. You will find this model's frame, leaf and lock specifications in the table below; the lock systems and galvanized or DKP sheet steel pages cover the options in detail. After delivery, our warranty and service coverage applies; see the care and lifespan page for keeping the surface in good condition.

Frequently Asked Questions

How much does the BD-TR66 model cost?

We cannot quote a price before measuring. The size of the door opening and your choice of finish, glass and lock all directly affect the total; the survey is free, and an itemized quotation follows. See our steel door prices page for details.

Can the BD-TR66 be produced in a different color?

Yes. The smoke anthracite finish in the image is simply this model's catalog choice; it can be produced in other colors with compact laminate, composite, marine plywood or wood veneer finishes. We compare them on our surface finish options page.

Can the glass in the BD-TR66 be changed?

Yes. The glass in the image is this model's catalog finish; provided Şişecam 5+5 mm laminated glass is used, it can be produced in different colors and patterns. It can also be produced without glass.

How does measuring work when ordering the BD-TR66?

Measuring is our job. We measure the clear width of the door opening, its height from the finished floor and the wall thickness; the details are on the how measurements are taken page.

How can I order the BD-TR66 model?

You can fill in the pre-order form on our website or reach us on 0532 689 21 46. Quoting product code BD-TR66 in your request helps speed things up. You can browse our other villa steel doors on the villa steel door models page.

Specifications

Product codeBD-TR66
CategoryVilla Steel Door Models
Leaf constructionsingle leaf + sidelight
Color / finishsmoke grey-anthracite
Surface patternfine vertical stripes
Handlerecessed pull bar
Design languagedesigner villa
Access systemOptional card or keypad entry
Sheet thicknessFrame 2 mm (0.079"), leaf 1.5+1.5 mm (0.118" total) DKP steel sheet (Ereğli A1)
FrameEreğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent
Frame reinforcementLock and hinge areas reinforced with 3 mm (0.118") DKP steel sheet
LeafEreğli A1 grade 1.5 mm (0.059") + 1.5 mm (0.059") omega-bent, monoblock-reinforced pan system
Leaf reinforcementLock and hinge area reinforced with 3 mm (0.118") angle bar
Leaf thicknessBare metal 70 mm (2.76") — 90 mm (3.54") in total
Infill80 kg/m³ rock wool
Lock surroundintegrated with 1 mm (0.039") grade 304 stainless steel
Hinge3 adjustable 20 mm (0.787") ball-bearing pin hinges
Hinge reinforcement5 mm (0.197") thick flat bar
Fixed pin5 units on the hinge side, 20 mm (0.787") diameter
GasketSilicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf (insect-, dust- and airtight)
Surface finish10 mm (0.394") Camsan first-grade iroko
Finish optionsPowder coating, natural wood, marine plywood, iroko wood or composite compact laminate
VarnishPolyurethane infill, 90-micron coverage rating
PolishAkzo Nobel
Accessoriesfirst-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions)
InstallationOne-piece inner/outer frame, clamp-grip jointing, fastened with M8 bolts
Frame-to-wall gap1 cm (0.394"), filled with polyurethane foam
ProductionManufactured to custom on-site measurements
WarrantyUnlimited coverage for manufacturing defects — 2-year official warranty certificate
Lock systemOptional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock
Glass sectionfrosted side glass with colorful abstract pattern
Glass typeŞişecam 5+5 mm (0.394" total) laminated glass (impact resistant)

Frequently Asked Questions

What is the lead time for a custom villa door?

Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.

How are steel doors packaged for sea freight export?

Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.

What measurements do you need to quote?

The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.

Can you manufacture to imperial (inch) dimensions?

Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.

Who installs the door at the destination?

Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.

What export documents travel with the shipment?

Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.

You May Also Like

Before you decide

Pages where we cover the technical questions most often asked about this model:

modern design

More Models in This Style

View All

anthracite and grey

Models in the Same Color Family

View All