Custom manufacturing and worldwide export — request a quote: +90 532 689 21 46
Bayrakdoor Steel Doors
Bayrakdoor

Horizontal-Lamella Dark Coffee-Smoke Villa Door BD-TR115

Product CodeBD-TR115

Dark smoke-toned horizontal-lamella leaf and iron-grille side glazing. Product code: BD-TR115. Manufactured to measure, following an on-site survey.

Leaf construction
single leaf + double latticed sidelight
Color / finish
dark brown-smoke grey
Handle
long vertical stainless steel handle
Design language
modern villa
Share this model

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeBD-TR115

This is here to block automated submissions — it only takes a second.

  • Survey and measurement are free
  • Same-day response
  • Made in our own factory
  • Lifetime manufacturing warranty
Download this model's PDF spec sheet
Worldwide shipping & export
Made in our own factory
Lifetime manufacturing warranty

The BD-TR115 horizontal-lamella dark coffee-smoke villa door is produced with a dark smoke-toned horizontal-lamella leaf and iron-grille side glazing. Like every door we build, this model is manufactured to measure — there's no ready-made leaf pulled from stock. The finish shown in the photo is dark coffee-smoke cladding.

Product Code: BD-TR115

Surface and Glass Panels

It's produced as a single leaf with double grille-pattern side glazing. The surface features horizontal lamellas. The color applied is dark coffee-smoke.

The model features iron-grille side glazing. A long vertical stainless handle is used. Cladding and hardware aren't fixed; it can be produced with the alternatives on our cladding options page.

The design language is described as modern villa.

Suitable Entrances

It's chosen primarily for residence apartments and villa entrances. Because the side sections widen the opening, this suits broad-fronted entrances rather than narrow ones — and it brings daylight into the hall as well. The difference between the two types isn't just size — we've detailed it on our villa door vs. building entrance door page.

From Measurement to Installation

Measurements are taken from the door opening, not the existing leaf — we've written up the step-by-step method on our how measurements are taken page. Frame, steel thickness, infill and lock specifications are listed in the feature table below. The steel choice is compared on our galvanized vs. cold-rolled steel page, and lock alternatives on our lock systems page. After installation, our care and lifespan and warranty and service terms apply.

Frequently Asked Questions

How much does BD-TR115 cost?

There's no fixed price — since every leaf is manufactured to measure, the amount depends on size, cladding and lock choice. We send a written, itemized quote after the survey. We've broken down the line items on our steel door prices page.

Can BD-TR115 be made in a different color?

It can be. Dark coffee-smoke is simply the finish shown in the photo, not a fixed choice — you can pick from the alternatives on our cladding options page.

Can the glass pattern be different?

Yes. The glass shown is this model's catalog finish; it can be produced in a different color and pattern as long as Şişecam 5+5 mm laminated glass is used. A version without glass is also possible.

How does the measuring stage work when ordering BD-TR115?

We take the measurement during the survey; nothing is expected of you. The measurement is taken from the door opening, not the existing leaf — we've explained the method on our how measurements are taken page.

How do I get a quote for BD-TR115?

You can fill out the pre-order form on the site, or reach us at 0532 689 21 46. Mentioning the BD-TR115 product code in your request speeds up the process. You can browse other villa steel door models on our villa steel door models page.

Specifications

Product codeBD-TR115
CategoryVilla Steel Door Models
Leaf constructionsingle leaf + double latticed sidelight
Color / finishdark brown-smoke grey
Surface patternhorizontal slats
Handlelong vertical stainless steel handle
Design languagemodern villa
Access systemOptional card or keypad entry
Sheet thicknessFrame 2 mm (0.079"), leaf 1.5+1.5 mm (0.118" total) DKP steel sheet (Ereğli A1)
FrameEreğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent
Frame reinforcementLock and hinge areas reinforced with 3 mm (0.118") DKP steel sheet
LeafEreğli A1 grade 1.5 mm (0.059") + 1.5 mm (0.059") omega-bent, monoblock-reinforced pan system
Leaf reinforcementLock and hinge area reinforced with 3 mm (0.118") angle bar
Leaf thicknessBare metal 70 mm (2.76") — 90 mm (3.54") in total
Infill80 kg/m³ rock wool
Lock surroundintegrated with 1 mm (0.039") grade 304 stainless steel
Hinge3 adjustable 20 mm (0.787") ball-bearing pin hinges
Hinge reinforcement5 mm (0.197") thick flat bar
Fixed pin5 units on the hinge side, 20 mm (0.787") diameter
GasketSilicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf (insect-, dust- and airtight)
Surface finish10 mm (0.394") Camsan first-grade iroko
Finish optionsPowder coating, natural wood, marine plywood, iroko wood or composite compact laminate
VarnishPolyurethane infill, 90-micron coverage rating
PolishAkzo Nobel
Accessoriesfirst-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions)
InstallationOne-piece inner/outer frame, clamp-grip jointing, fastened with M8 bolts
Frame-to-wall gap1 cm (0.394"), filled with polyurethane foam
ProductionManufactured to custom on-site measurements
WarrantyUnlimited coverage for manufacturing defects — 2-year official warranty certificate
Lock systemOptional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock
Glass sectionside glass with iron lattice
Glass typeŞişecam 5+5 mm (0.394" total) laminated glass (impact resistant)

Frequently Asked Questions

What is the lead time for a custom villa door?

Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.

How are steel doors packaged for sea freight export?

Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.

What measurements do you need to quote?

The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.

Can you manufacture to imperial (inch) dimensions?

Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.

Who installs the door at the destination?

Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.

What export documents travel with the shipment?

Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.

You May Also Like

Before you decide

Pages where we cover the technical questions most often asked about this model:

modern design

More Models in This Style

View All

anthracite and grey

Models in the Same Color Family

View All