Custom manufacturing and worldwide export — request a quote: +90 532 689 21 46
Bayrakdoor Steel Doors
Bayrakdoor

Horizontal-Line Red Walnut Villa Door BD-TR21

Product CodeBD-TR21

A horizontally lined red walnut leaf flanked by wrought-iron stained-glass side lights and lantern sconces. Product code: BD-TR21. Manufactured to custom measurements following an on-site survey.

Leaf construction
single leaf + double sidelight
Color / finish
red walnut
Handle
long stainless steel handle
Design language
modern-classic villa
Share this model

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeBD-TR21

This is here to block automated submissions — it only takes a second.

  • Survey and measurement are free
  • Same-day response
  • Made in our own factory
  • Lifetime manufacturing warranty
Download this model's PDF spec sheet
Worldwide shipping & export
Made in our own factory
Lifetime manufacturing warranty

This villa steel door model carries the code BD-TR21: a horizontally lined red walnut leaf flanked by wrought-iron stained-glass side lights and lantern sconces. Production begins after the order: an on-site survey comes first, and the leaf is manufactured to match the door opening. The photo shows the red walnut finish.

Product Code: BD-TR21

Glass and Surface Details

The model is configured as a single leaf with double side-lights. The surface treatment takes the form of horizontal lines. Red walnut is applied as the color.

The glass section takes the form of wrought-iron, stained-glass-patterned side lights. A long stainless steel handle was chosen for this model. Color, pattern, and handle selection can all be adjusted to fit the project; we compare the options on our finish options page.

The design language is best described as modern-classic villa.

Suitable Entrances

It is typically used in detached house and residence apartment projects. The side panels allow wide door openings to be filled with a single, unified configuration. The difference between these two door types goes beyond size alone; we detail it on our villa door vs. building entrance door page.

Production and Installation Process

Production begins with an on-site measurement. How the door opening is measured is explained on our how to measure page; material choices are covered on our galvanized vs. DKP steel and lock systems pages. The technical specifications for this model are given in the table below. Maintenance steps that extend the door's lifespan are covered on our maintenance and lifespan page, and coverage details are on our warranty and service page.

Frequently Asked Questions

How is the price determined for BD-TR21?

We can't quote a price before measuring. The size of the door opening, along with the finish, glass, and lock you choose, directly affects the cost; the survey is free and is followed by an itemized quote. For details, see our steel door prices page.

Can I have this model made in a color other than red walnut?

Yes, the color is not fixed. The catalog shows red walnut, but the finish is chosen to match your project; on our finish options page we explain which surface works best where.

Can the glass pattern be different?

Yes. The glass shown is the catalog finish for this model; it can be produced in a different color and pattern as long as Şişecam 5+5 mm laminated glass is used. Production without glass is also possible.

Do I need to take the measurement myself?

Our survey team measures on site. If you'd still like to understand the process, we explain the three key points we measure on our how to measure page.

How do I get a quote for BD-TR21?

You can fill out the pre-order form on our site or call us at 0532 689 21 46. Mentioning the BD-TR21 product code speeds up the process. You can browse other villa steel door models on our villa steel door models page.

Specifications

Product codeBD-TR21
CategoryVilla Steel Door Models
Leaf constructionsingle leaf + double sidelight
Color / finishred walnut
Surface patternsurface with horizontal lines
Handlelong stainless steel handle
Design languagemodern-classic villa
Access systemOptional card or keypad entry
Sheet thicknessFrame 2 mm (0.079"), leaf 1.5+1.5 mm (0.118" total) DKP steel sheet (Ereğli A1)
FrameEreğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent
Frame reinforcementLock and hinge areas reinforced with 3 mm (0.118") DKP steel sheet
LeafEreğli A1 grade 1.5 mm (0.059") + 1.5 mm (0.059") omega-bent, monoblock-reinforced pan system
Leaf reinforcementLock and hinge area reinforced with 3 mm (0.118") angle bar
Leaf thicknessBare metal 70 mm (2.76") — 90 mm (3.54") in total
Infill80 kg/m³ rock wool
Lock surroundintegrated with 1 mm (0.039") grade 304 stainless steel
Hinge3 adjustable 20 mm (0.787") ball-bearing pin hinges
Hinge reinforcement5 mm (0.197") thick flat bar
Fixed pin5 units on the hinge side, 20 mm (0.787") diameter
GasketSilicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf (insect-, dust- and airtight)
Surface finish10 mm (0.394") Camsan first-grade iroko
Finish optionsPowder coating, natural wood, marine plywood, iroko wood or composite compact laminate
VarnishPolyurethane infill, 90-micron coverage rating
PolishAkzo Nobel
Accessoriesfirst-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions)
InstallationOne-piece inner/outer frame, clamp-grip jointing, fastened with M8 bolts
Frame-to-wall gap1 cm (0.394"), filled with polyurethane foam
ProductionManufactured to custom on-site measurements
WarrantyUnlimited coverage for manufacturing defects — 2-year official warranty certificate
Lock systemOptional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock
Glass sectionsidelights with wrought iron and stained glass pattern
Glass typeŞişecam 5+5 mm (0.394" total) laminated glass (impact resistant)

Frequently Asked Questions

What is the lead time for a custom villa door?

Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.

How are steel doors packaged for sea freight export?

Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.

What measurements do you need to quote?

The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.

Can you manufacture to imperial (inch) dimensions?

Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.

Who installs the door at the destination?

Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.

What export documents travel with the shipment?

Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.

You May Also Like

Before you decide

Pages where we cover the technical questions most often asked about this model:

modern design

More Models in This Style

View All

wood tone

Models in the Same Color Family

View All