Custom manufacturing and worldwide export — request a quote: +90 532 689 21 46
Bayrakdoor Steel Doors
Bayrakdoor

Horizontal-Panel Anthracite Grey Villa Door BD-TR103

Product CodeBD-TR103

An anthracite horizontal-panel surface, partitioned glass, and a long stainless steel handle. Product code: BD-TR103. Manufactured to measure after an on-site survey.

Leaf construction
single leaf + double sidelight
Color / finish
anthracite grey
Handle
long vertical stainless steel handle
Design language
modern villa
Share this model

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeBD-TR103

This is here to block automated submissions — it only takes a second.

  • Survey and measurement are free
  • Same-day response
  • Made in our own factory
  • Lifetime manufacturing warranty
Download this model's PDF spec sheet
Worldwide shipping & export
Made in our own factory
Lifetime manufacturing warranty

This villa steel door model carries the code BD-TR103: an anthracite horizontal-panel surface, partitioned glass, and a long stainless steel handle. There is no standard size — the door opening is measured during the site survey, and production follows that measurement. The catalog finish is in an anthracite grey tone.

Product Code: BD-TR103

Glass and Surface Details

The leaf configuration is a single leaf with double side glass. The leaf surface is worked as a flat, horizontally paneled surface. The finish is in an anthracite grey tone.

The glass section takes the form of partitioned glass panels. A long stainless steel vertical handle is used. The color, pattern, and handle can be adjusted to suit the project; the options are compared on our coating options page.

The design language is best described as modern villa.

Which Entrances Does It Suit?

It is typically used for gated houses with a garden and villa entrances. It is designed for wide openings: the side sections both fill the width and bring extra light into the entrance. We compare where villa doors and building entrance doors diverge on our villa door vs. building entrance door page.

Production and Installation Process

The measurement is taken from the door opening, not from an existing leaf; we've written out the step-by-step method on our how measurements are taken page. The frame, sheet-metal thickness, filling, and lock specifications are listed in the table below. The choice of steel sheet is compared on our galvanized vs. DKP steel page, and lock alternatives on our lock systems page. The maintenance steps that extend the door's lifespan are on our maintenance and lifespan page, and coverage details are on our warranty and service page.

Frequently Asked Questions

How much does the model with code BD-TR103 cost?

The price can't be quoted without a measurement. The size of the door opening, the finish, the glass, and the lock you choose directly affect the cost; the site survey is free, and a detailed quote follows. See our steel door prices page for details.

Can I order this model in a color other than anthracite grey?

Yes, it can. Anthracite grey is simply the finish shown in the photo, not a fixed option — you can choose from the alternatives on our coating options page.

Can the glass be changed on the BD-TR103 model?

Yes. The glass shown is this model's catalog finish; using Şişecam 5+5 mm laminated glass, it can be produced in different colors and patterns. A version without glass is also possible.

How is the measurement taken for BD-TR103?

We take the measurement during the site survey; nothing is expected from you. The measurement is taken from the door opening, not the existing leaf — we explain the method on our how measurements are taken page.

How can I order the model with code BD-TR103?

You can fill out the pre-order form on our site or call us at 0532 689 21 46. Mentioning the BD-TR103 product code speeds up the process. You can browse other villa steel door models on our villa steel door models page.

Specifications

Product codeBD-TR103
CategoryVilla Steel Door Models
Leaf constructionsingle leaf + double sidelight
Color / finishanthracite grey
Surface patternflat surface with horizontal sections
Handlelong vertical stainless steel handle
Design languagemodern villa
Access systemOptional card or keypad entry
Sheet thicknessFrame 2 mm (0.079"), leaf 1.5+1.5 mm (0.118" total) DKP steel sheet (Ereğli A1)
FrameEreğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent
Frame reinforcementLock and hinge areas reinforced with 3 mm (0.118") DKP steel sheet
LeafEreğli A1 grade 1.5 mm (0.059") + 1.5 mm (0.059") omega-bent, monoblock-reinforced pan system
Leaf reinforcementLock and hinge area reinforced with 3 mm (0.118") angle bar
Leaf thicknessBare metal 70 mm (2.76") — 90 mm (3.54") in total
Infill80 kg/m³ rock wool
Lock surroundintegrated with 1 mm (0.039") grade 304 stainless steel
Hinge3 adjustable 20 mm (0.787") ball-bearing pin hinges
Hinge reinforcement5 mm (0.197") thick flat bar
Fixed pin5 units on the hinge side, 20 mm (0.787") diameter
GasketSilicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf (insect-, dust- and airtight)
Surface finish10 mm (0.394") Camsan first-grade iroko
Finish optionsPowder coating, natural wood, marine plywood, iroko wood or composite compact laminate
VarnishPolyurethane infill, 90-micron coverage rating
PolishAkzo Nobel
Accessoriesfirst-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions)
InstallationOne-piece inner/outer frame, clamp-grip jointing, fastened with M8 bolts
Frame-to-wall gap1 cm (0.394"), filled with polyurethane foam
ProductionManufactured to custom on-site measurements
WarrantyUnlimited coverage for manufacturing defects — 2-year official warranty certificate
Lock systemOptional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock
Glass sectionvertically divided glass
Glass typeŞişecam 5+5 mm (0.394" total) laminated glass (impact resistant)

Frequently Asked Questions

What is the lead time for a custom villa door?

Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.

How are steel doors packaged for sea freight export?

Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.

What measurements do you need to quote?

The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.

Can you manufacture to imperial (inch) dimensions?

Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.

Who installs the door at the destination?

Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.

What export documents travel with the shipment?

Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.

You May Also Like

Before you decide

Pages where we cover the technical questions most often asked about this model:

modern design

More Models in This Style

View All

anthracite and grey

Models in the Same Color Family

View All