Custom manufacturing and worldwide export — request a quote: +90 532 689 21 46
Bayrakdoor Steel Doors
Bayrakdoor

Horizontal-Slat Anthracite Grey Villa Door BD-TR57

Product CodeBD-TR57

A horizontal-slat anthracite leaf, stainless steel bands, and a wrought-iron patterned side glass panel. Product code: BD-TR57. Custom-built to measure after an on-site survey.

Leaf construction
single leaf + sidelight
Color / finish
anthracite grey
Handle
horizontal stainless steel pull bar
Design language
modern villa
Upper section
door number plate
Share this model

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeBD-TR57

This is here to block automated submissions — it only takes a second.

  • Survey and measurement are free
  • Same-day response
  • Made in our own factory
  • Lifetime manufacturing warranty
Download this model's PDF spec sheet
Worldwide shipping & export
Made in our own factory
Lifetime manufacturing warranty

BD-TR57 is a villa steel door model distinguished by a horizontal-slat anthracite leaf, stainless steel bands, and a wrought-iron patterned side glass panel. There's no standard size — the door opening is measured during the survey, and production follows that measurement.

Product Code: BD-TR57

Panel, Glass, and Pediment

The panel layout is a single leaf with a side glass panel. The panel shows horizontal slats and stainless steel bands. The catalog color is an anthracite grey tone.

The glass layout is a wrought-iron patterned side panel. There is a house-number plate above the panel. A horizontal stainless steel handle is used. Color, pattern, and handle can all be adjusted to suit the project; we compare the options on the finish options page.

The design language is best described as modern villa.

Who Is This Model For?

Villa entrances and detached houses are the typical settings for this model. Thanks to the side sections, wide door openings can be covered with a single configuration. We compare where villa doors and building entrance doors differ on the villa doors vs. building entrance doors page.

Measurement, Production, and Installation

We take the measurement during the survey — it's based on the door opening, not the existing leaf; the method is explained on the how we take the measurement page. You'll find this model's frame, leaf, and lock specifications in the table below; the lock systems and galvanized vs. cold-rolled steel pages go into the options in more detail. After delivery, the warranty and service coverage applies; see the maintenance and lifespan page for how to protect the finish.

Frequently Asked Questions

How is the price of BD-TR57 determined?

We don't publish a list price, because every door is built to measure. The final amount depends on the size of the door opening, the finish, glass, and lock you choose. After a free on-site survey, we provide a written, itemized quote — we explain what drives the price on the steel door prices page.

Can the color of the BD-TR57 door be changed?

Yes, the color isn't fixed. The catalog shows anthracite grey, but the finish is chosen to suit each project; on the finish options page we cover which surface works best where.

Can the glass be changed on the BD-TR57 model?

Yes. The glass shown is the catalog's default for this model; as long as Şişecam 5+5 mm laminated glass is used, it can be produced in different colors and patterns. Production without glass is also possible.

How does the measurement stage work when ordering BD-TR57?

Taking the measurement is our job. We measure the clear width of the door opening, the height from the finished floor, and the wall thickness; the details are on the how we take the measurement page.

How can I order the BD-TR57 model?

You can fill out the pre-order form on the site, or call us at 0532 689 21 46. Mentioning the BD-TR57 product code in your request speeds things up. You can browse other models on the villa steel door models page.

Specifications

Product codeBD-TR57
CategoryVilla Steel Door Models
Leaf constructionsingle leaf + sidelight
Color / finishanthracite grey
Surface patternhorizontal slats and stainless steel bands
Handlehorizontal stainless steel pull bar
Upper sectiondoor number plate
Design languagemodern villa
Access systemOptional card or keypad entry
Sheet thicknessFrame 2 mm (0.079"), leaf 1.5+1.5 mm (0.118" total) DKP steel sheet (Ereğli A1)
FrameEreğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent
Frame reinforcementLock and hinge areas reinforced with 3 mm (0.118") DKP steel sheet
LeafEreğli A1 grade 1.5 mm (0.059") + 1.5 mm (0.059") omega-bent, monoblock-reinforced pan system
Leaf reinforcementLock and hinge area reinforced with 3 mm (0.118") angle bar
Leaf thicknessBare metal 70 mm (2.76") — 90 mm (3.54") in total
Infill80 kg/m³ rock wool
Lock surroundintegrated with 1 mm (0.039") grade 304 stainless steel
Hinge3 adjustable 20 mm (0.787") ball-bearing pin hinges
Hinge reinforcement5 mm (0.197") thick flat bar
Fixed pin5 units on the hinge side, 20 mm (0.787") diameter
GasketSilicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf (insect-, dust- and airtight)
Surface finish10 mm (0.394") Camsan first-grade iroko
Finish optionsPowder coating, natural wood, marine plywood, iroko wood or composite compact laminate
VarnishPolyurethane infill, 90-micron coverage rating
PolishAkzo Nobel
Accessoriesfirst-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions)
InstallationOne-piece inner/outer frame, clamp-grip jointing, fastened with M8 bolts
Frame-to-wall gap1 cm (0.394"), filled with polyurethane foam
ProductionManufactured to custom on-site measurements
WarrantyUnlimited coverage for manufacturing defects — 2-year official warranty certificate
Lock systemOptional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock
Glass sectionsidelight with wrought iron pattern
Glass typeŞişecam 5+5 mm (0.394" total) laminated glass (impact resistant)

Frequently Asked Questions

What is the lead time for a custom villa door?

Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.

How are steel doors packaged for sea freight export?

Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.

What measurements do you need to quote?

The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.

Can you manufacture to imperial (inch) dimensions?

Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.

Who installs the door at the destination?

Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.

What export documents travel with the shipment?

Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.

You May Also Like

Before you decide

Pages where we cover the technical questions most often asked about this model:

modern design

More Models in This Style

View All

anthracite and grey

Models in the Same Color Family

View All