A horizontal wood band cuts across the anthracite grey body, with a handle recessed into it. Product code: BD-TR113. Manufactured to measure after an on-site survey.
- Leaf construction
- single leaf + sidelight
- Color / finish
- anthracite grey + wood band
- Handle
- handle recessed into band
- Design language
- designer villa
Pre-Order & Price Request
This model is made to measure. Leave your request and we'll call you to arrange a site survey.
- Survey and measurement are free
- Same-day response
- Made in our own factory
- Lifetime manufacturing warranty
A horizontal wood band cutting across the anthracite grey body, with a handle recessed into it — this is what sets the BD-TR113 villa steel door model apart. There is no standard size — the door opening is measured during the site survey, and production follows that measurement. The photo shows the anthracite grey with wood band finish.
Product Code: BD-TR113
Surface and Glass Panel
It is produced as a single leaf with a side glass panel. The surface finish takes the form of a horizontal wood band. The surface is finished in anthracite grey with a wood band.
The glass panel is a narrow vertical side glass. The handle is recessed into the band. The finish and hardware aren't fixed; it can be produced with the alternatives on our coating options page.
The design language is best described as designer villa.
Where Is It Used?
Residential apartments and detached houses are the typical settings for this model. It is designed for wide openings: the side sections both fill the width and bring extra light into the entrance. The difference between these two door types isn't just size; we cover it in detail on our villa door vs. building entrance door page.
From Measurement to Installation
The measurement is taken from the door opening, not from an existing leaf; we've written out the step-by-step method on our how measurements are taken page. The frame, sheet-metal thickness, filling, and lock specifications are listed in the table below. The choice of steel sheet is compared on our galvanized vs. DKP steel page, and lock alternatives on our lock systems page. The maintenance steps that extend the door's lifespan are on our maintenance and lifespan page, and coverage details are on our warranty and service page.
Frequently Asked Questions
How is the price determined for BD-TR113?
We don't publish a list price, because the door is made to measure. The cost is set by the size of the door opening, the finish, the glass, and the lock. After a free site survey, we provide an itemized written quote; we explain what affects the price on our steel door prices page.
Can I order this model in a color other than anthracite grey with wood band?
Yes, it can. Anthracite grey with a wood band is simply the finish shown in the photo, not a fixed option — you can choose from the alternatives on our coating options page.
Can the glass pattern be different?
Yes. The glass shown is this model's catalog finish; using Şişecam 5+5 mm laminated glass, it can be produced in different colors and patterns. A version without glass is also possible.
How does the measurement stage work when ordering BD-TR113?
We take the measurement during the site survey; nothing is expected from you. The measurement is taken from the door opening, not the existing leaf — we explain the method on our how measurements are taken page.
How do I get a quote for BD-TR113?
You can fill out the pre-order form on our site or call us at 0532 689 21 46. Mentioning the BD-TR113 product code speeds up the process. You can browse other villa steel door models on our villa steel door models page.
Specifications
| Product code | BD-TR113 |
| Category | Villa Steel Door Models |
| Leaf construction | single leaf + sidelight |
| Color / finish | anthracite grey + wood band |
| Surface pattern | horizontal wood band |
| Handle | handle recessed into band |
| Design language | designer villa |
| Access system | Optional card or keypad entry |
| Sheet thickness | Frame 2 mm (0.079"), leaf 1.5+1.5 mm (0.118" total) DKP steel sheet (Ereğli A1) |
| Frame | Ereğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent |
| Frame reinforcement | Lock and hinge areas reinforced with 3 mm (0.118") DKP steel sheet |
| Leaf | Ereğli A1 grade 1.5 mm (0.059") + 1.5 mm (0.059") omega-bent, monoblock-reinforced pan system |
| Leaf reinforcement | Lock and hinge area reinforced with 3 mm (0.118") angle bar |
| Leaf thickness | Bare metal 70 mm (2.76") — 90 mm (3.54") in total |
| Infill | 80 kg/m³ rock wool |
| Lock surround | integrated with 1 mm (0.039") grade 304 stainless steel |
| Hinge | 3 adjustable 20 mm (0.787") ball-bearing pin hinges |
| Hinge reinforcement | 5 mm (0.197") thick flat bar |
| Fixed pin | 5 units on the hinge side, 20 mm (0.787") diameter |
| Gasket | Silicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf (insect-, dust- and airtight) |
| Surface finish | 10 mm (0.394") Camsan first-grade iroko |
| Finish options | Powder coating, natural wood, marine plywood, iroko wood or composite compact laminate |
| Varnish | Polyurethane infill, 90-micron coverage rating |
| Polish | Akzo Nobel |
| Accessories | first-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions) |
| Installation | One-piece inner/outer frame, clamp-grip jointing, fastened with M8 bolts |
| Frame-to-wall gap | 1 cm (0.394"), filled with polyurethane foam |
| Production | Manufactured to custom on-site measurements |
| Warranty | Unlimited coverage for manufacturing defects — 2-year official warranty certificate |
| Lock system | Optional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock |
| Glass section | narrow vertical side glass |
| Glass type | Şişecam 5+5 mm (0.394" total) laminated glass (impact resistant) |
Frequently Asked Questions
What is the lead time for a custom villa door?
Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.
How are steel doors packaged for sea freight export?
Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.
What measurements do you need to quote?
The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.
Can you manufacture to imperial (inch) dimensions?
Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.
Who installs the door at the destination?
Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.
What export documents travel with the shipment?
Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.
- • A free on-site survey is carried out before ordering to measure the door opening.
- • Production follows the dimensions and finish you approve after the survey.
- • Installation is carried out on-site by our own team.
- • Our warranty against manufacturing and workmanship defects is unlimited; an official 2-year warranty document is provided on delivery.
- • Price incl. VAT: %20 Includes VAT.
You May Also Like
Before you decide
Pages where we cover the technical questions most often asked about this model:
modern design
More Models in This Style

Geometric Diamond Orange Red Walnut Steel Door C-TR730

Diamond-Motif Dark Brown Steel Door C-TR726

Circle Medallion Dark Burgundy Brown Steel Door C-TR720

Tall Vertical Dark Burgundy Gloss Steel Door C-TR718
wood tone
Models in the Same Color Family

Three-Section Honey Walnut Steel Door C-TR731

Geometric Diamond Orange Red Walnut Steel Door C-TR730

Two-Section Paneled Dark Walnut Antiqued Steel Door C-TR729





