Custom manufacturing and worldwide export — request a quote: +90 532 689 21 46
Bayrakdoor Steel Doors
Bayrakdoor

Minimal Red Villa Door BD-TR131

Product CodeBD-TR131

A plain red leaf on a brick facade with a slim vertical glass panel alongside. Product code: BD-TR131. Made to measure after an on-site survey.

Leaf construction
single leaf + narrow sidelight
Color / finish
red
Handle
black horizontal pull bar
Design language
modern villa
Share this model

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeBD-TR131

This is here to block automated submissions — it only takes a second.

  • Survey and measurement are free
  • Same-day response
  • Made in our own factory
  • Lifetime manufacturing warranty
Download this model's PDF spec sheet
Worldwide shipping & export
Made in our own factory
Lifetime manufacturing warranty

BD-TR131 is a villa steel door model distinguished by its plain red leaf on a brick facade with a slim vertical glass panel alongside. There is no standard size — the door opening is measured during the survey, and production follows that measurement. The image shows a red finish.

Product Code: BD-TR131

Glass and Surface Details

Produced as a single leaf with slim side glass. The surface treatment is a plain flat surface. The surface is finished in red.

The glass layout is resolved as a slim vertical side pane. It is completed with a black horizontal lever handle. Finish and hardware are not fixed; the door can be produced with any of the alternatives on the surface finish options page.

The design language is defined as modern villa.

Where Is It Used?

It is most often used in residence apartment and villa entrance projects. It is designed for wide openings: the side sections both make up the width and bring light into the entrance. The difference between these two types isn't just size; we've detailed it on the difference between a villa door and a building entrance door page.

Measurement, Production and Installation

Measurements are taken from the door opening, not the existing leaf; the how measurements are taken page walks through it step by step. Frame, sheet thickness, infill and lock specifications are listed in the table below. Sheet steel choices are compared on the galvanized or DKP sheet steel page, and lock alternatives on the lock systems page. After delivery, our warranty and service coverage applies; see the care and lifespan page for keeping the surface in good condition.

Frequently Asked Questions

How much does model BD-TR131 cost?

There is no fixed price — since every leaf is made to measure, the amount varies with size, finish and lock choice. After the survey we send a written, itemized quote. The line items are detailed on the steel door prices page.

Can the BD-TR131 be produced in a different color?

It can. Red is simply the finish photographed, not a fixed choice — you can pick from the alternatives on the surface finish options page.

Can the glass pattern be different?

Yes. The glass pictured is this model's catalog finish; provided Şişecam 5+5 mm laminated glass is used, it can be produced in different colors and patterns. A glassless version is also possible.

How does the measuring stage work when ordering the BD-TR131?

Our survey team measures on site. If you'd still like to know the process, the how measurements are taken page explains the three points we measure.

How do I get a quote for the BD-TR131?

You can fill out the pre-order form on our site or reach us at 0532 689 21 46. Mentioning product code BD-TR131 in your request speeds things up. You can browse our other villa steel door models on the villa steel door models page.

Specifications

Product codeBD-TR131
CategoryVilla Steel Door Models
Leaf constructionsingle leaf + narrow sidelight
Color / finishred
Surface patternsmooth plain surface
Handleblack horizontal pull bar
Design languagemodern villa
Access systemOptional card or keypad entry
Sheet thicknessFrame 2 mm (0.079"), leaf 1.5+1.5 mm (0.118" total) DKP steel sheet (Ereğli A1)
FrameEreğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent
Frame reinforcementLock and hinge areas reinforced with 3 mm (0.118") DKP steel sheet
LeafEreğli A1 grade 1.5 mm (0.059") + 1.5 mm (0.059") omega-bent, monoblock-reinforced pan system
Leaf reinforcementLock and hinge area reinforced with 3 mm (0.118") angle bar
Leaf thicknessBare metal 70 mm (2.76") — 90 mm (3.54") in total
Infill80 kg/m³ rock wool
Lock surroundintegrated with 1 mm (0.039") grade 304 stainless steel
Hinge3 adjustable 20 mm (0.787") ball-bearing pin hinges
Hinge reinforcement5 mm (0.197") thick flat bar
Fixed pin5 units on the hinge side, 20 mm (0.787") diameter
GasketSilicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf (insect-, dust- and airtight)
Surface finish10 mm (0.394") Camsan first-grade iroko
Finish optionsPowder coating, natural wood, marine plywood, iroko wood or composite compact laminate
VarnishPolyurethane infill, 90-micron coverage rating
PolishAkzo Nobel
Accessoriesfirst-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions)
InstallationOne-piece inner/outer frame, clamp-grip jointing, fastened with M8 bolts
Frame-to-wall gap1 cm (0.394"), filled with polyurethane foam
ProductionManufactured to custom on-site measurements
WarrantyUnlimited coverage for manufacturing defects — 2-year official warranty certificate
Lock systemOptional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock
Glass sectionnarrow vertical side glass
Glass typeŞişecam 5+5 mm (0.394" total) laminated glass (impact resistant)

Frequently Asked Questions

What is the lead time for a custom villa door?

Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.

How are steel doors packaged for sea freight export?

Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.

What measurements do you need to quote?

The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.

Can you manufacture to imperial (inch) dimensions?

Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.

Who installs the door at the destination?

Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.

What export documents travel with the shipment?

Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.

You May Also Like

Before you decide

Pages where we cover the technical questions most often asked about this model:

modern design

More Models in This Style

View All

colored

Models in the Same Color Family

View All