Custom manufacturing and worldwide export — request a quote: +90 532 689 21 46
Bayrakdoor Steel Doors
Bayrakdoor

Narrow Horizontal-Stripe White Villa Door BD-TR23

Product CodeBD-TR23

A white horizontal-stripe leaf beside a narrow wrought-iron patterned glass panel. Product code: BD-TR23. Custom-built to measure after an on-site survey.

Leaf construction
single leaf + narrow sidelight
Color / finish
white
Handle
long stainless steel handle
Design language
modern villa
Share this model

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeBD-TR23

This is here to block automated submissions — it only takes a second.

  • Survey and measurement are free
  • Same-day response
  • Made in our own factory
  • Lifetime manufacturing warranty
Download this model's PDF spec sheet
Worldwide shipping & export
Made in our own factory
Lifetime manufacturing warranty

A white horizontal-stripe leaf beside a narrow, wrought-iron patterned glass panel — that's what sets the BD-TR23 villa steel door apart. It isn't sold in ready-made sizes; your entrance is measured on site, and the leaf is manufactured to that measurement. The finish in the photo is white cladding.

Product Code: BD-TR23

Surface and Glass Panel

It is manufactured as a single leaf with a narrow side glass panel. The surface has fine horizontal stripes. The surface is finished in white.

The glass section is a narrow, wrought-iron patterned side panel. A long stainless steel handle is used. The finish and hardware aren't fixed; the door can be produced with any of the alternatives on the finish options page.

The design language is best described as modern villa.

Suitable Entrances

It's primarily chosen for residence apartments and detached houses. It's designed for wide openings: the side sections both meet the size requirement and bring extra light into the entrance. The difference between the two door types isn't just size — we go into detail on the villa doors vs. building entrance doors page.

From Measurement to Installation

The measurement is taken from the door opening, not the existing leaf; we've written out the step-by-step method on the how we take the measurement page. The frame, sheet-metal thickness, infill, and lock specifications are listed in the table below. The sheet-metal choice is compared on the galvanized vs. cold-rolled steel page, and lock alternatives on the lock systems page. After delivery, the warranty and service coverage applies; see the maintenance and lifespan page for how to protect the finish.

Frequently Asked Questions

How much does BD-TR23 cost?

There's no fixed price — since every leaf is manufactured to measure, the amount varies with the size, the finish, and the lock you select. We send a detailed written quote after the survey. We've broken down the cost items on the steel door prices page.

Can the color of the BD-TR23 door be changed?

It can be. White is simply the finish shown in the photo, not a fixed choice — you can pick from the alternatives on the finish options page.

Can the glass pattern be different?

Yes. The glass shown is the catalog's default for this model; as long as Şişecam 5+5 mm laminated glass is used, it can be produced in different colors and patterns. Production without glass is also possible.

How is the measurement taken for BD-TR23?

Taking the measurement is our job. We measure the clear width of the door opening, the height from the finished floor, and the wall thickness; the details are on the how we take the measurement page.

How do I get a quote for BD-TR23?

You can fill out the pre-order form on the site, or call us at 0532 689 21 46. Mentioning the BD-TR23 product code in your request speeds things up. You can browse other models on the villa steel door models page.

Specifications

Product codeBD-TR23
CategoryVilla Steel Door Models
Leaf constructionsingle leaf + narrow sidelight
Color / finishwhite
Surface patternfine horizontal lines
Handlelong stainless steel handle
Design languagemodern villa
Access systemOptional card or keypad entry
Sheet thicknessFrame 2 mm (0.079"), leaf 1.5+1.5 mm (0.118" total) DKP steel sheet (Ereğli A1)
FrameEreğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent
Frame reinforcementLock and hinge areas reinforced with 3 mm (0.118") DKP steel sheet
LeafEreğli A1 grade 1.5 mm (0.059") + 1.5 mm (0.059") omega-bent, monoblock-reinforced pan system
Leaf reinforcementLock and hinge area reinforced with 3 mm (0.118") angle bar
Leaf thicknessBare metal 70 mm (2.76") — 90 mm (3.54") in total
Infill80 kg/m³ rock wool
Lock surroundintegrated with 1 mm (0.039") grade 304 stainless steel
Hinge3 adjustable 20 mm (0.787") ball-bearing pin hinges
Hinge reinforcement5 mm (0.197") thick flat bar
Fixed pin5 units on the hinge side, 20 mm (0.787") diameter
GasketSilicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf (insect-, dust- and airtight)
Surface finish10 mm (0.394") Camsan first-grade iroko
Finish optionsPowder coating, natural wood, marine plywood, iroko wood or composite compact laminate
VarnishPolyurethane infill, 90-micron coverage rating
PolishAkzo Nobel
Accessoriesfirst-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions)
InstallationOne-piece inner/outer frame, clamp-grip jointing, fastened with M8 bolts
Frame-to-wall gap1 cm (0.394"), filled with polyurethane foam
ProductionManufactured to custom on-site measurements
WarrantyUnlimited coverage for manufacturing defects — 2-year official warranty certificate
Lock systemOptional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock
Glass sectionnarrow sidelight with black wrought iron pattern
Glass typeŞişecam 5+5 mm (0.394" total) laminated glass (impact resistant)

Frequently Asked Questions

What is the lead time for a custom villa door?

Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.

How are steel doors packaged for sea freight export?

Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.

What measurements do you need to quote?

The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.

Can you manufacture to imperial (inch) dimensions?

Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.

Who installs the door at the destination?

Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.

What export documents travel with the shipment?

Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.

You May Also Like

Before you decide

Pages where we cover the technical questions most often asked about this model:

modern design

More Models in This Style

View All

white and cream

Models in the Same Color Family

View All