Custom manufacturing and worldwide export — request a quote: +90 532 689 21 46
Bayrakdoor Steel Doors

Circle Pattern Honey Glazed Pivot Villa Door BY-328

Product CodeBY-328

Circle Pattern Honey Glazed Pivot Villa Door. Product code: BY-328. Made to measure after an on-site survey.

Leaf construction
single leaf
Color / finish
honey tone
Glass
Şişecam 5+5 mm (0.394" total) laminated glass (impact resistant)
Design language
luxury pivot
Share this model

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeBY-328

This is here to block automated submissions — it only takes a second.

  • Survey and measurement are free
  • Same-day response
  • Made in our own factory
  • Lifetime manufacturing warranty
Download this model's PDF spec sheet
Worldwide shipping & export
Made in our own factory
Lifetime manufacturing warranty

The circle pattern honey glazed pivot villa door appears in the catalog under code BY-328. It is not sold in stock sizes; your entrance is measured on site, and the leaf is built to that measurement. The catalog finish is a honey tone.

Product Code: BY-328

Leaf Surface

The door is structured as a single leaf. The surface treatment is glazed with a circle pattern. The finish is a honey tone.

Cladding and hardware are not fixed; the door can be produced with any of the alternatives on the cladding options page.

The design language is luxury pivot.

Which Entrances Does It Suit?

It is chosen primarily for wide-fronted detached homes and hotel and showroom entrances. The one-piece leaf presents an uninterrupted surface when viewed from outside. Because a pivot system transfers the leaf's weight to the floor, it can carry a taller and heavier leaf than a hinged door. Since the leaf sweeps through space in front and behind as it turns, the entrance must accommodate this clearance — details on the when to choose a pivot door page.

Measurement, Production, and Installation

We take the measurements during the site survey — based on the door opening, not the existing leaf; the method is explained on the how doors are measured page. You will find this model's frame, leaf, and lock specifications in the table below; the lock systems and galvanized or DKP sheet steel pages cover the options in detail. After installation, the care and lifespan and warranty and service terms apply.

Frequently Asked Questions

How much does BY-328 cost?

We cannot quote a price before taking measurements. The size of the door opening and your choice of cladding, glass, and lock directly affect the total; the site survey is free, and an itemized quote follows. See steel door prices for details.

Can I have this model in a color other than honey?

Yes, it can. Honey is only the finish shown in the photo, not a fixed choice — you can pick from the alternatives on the cladding options page.

How are measurements taken for BY-328?

Measuring is our job. We measure the clear width of the door opening, its height from the finished floor, and the wall thickness; details are on the how doors are measured page.

How can I order model BY-328?

You can fill in the pre-order form on our website or call us on 0532 689 21 46. Mentioning the product code BY-328 in your request speeds things up. You can browse other pivot steel door designs on the pivot steel door models page.

Specifications

Product codeBY-328
CategoryPivot Steel Door Models
Color / finishhoney tone
Design languageluxury pivot
Leaf constructionsingle leaf
Rotation systemFloor and ceiling bearings — no conventional hinges used
Load transferLeaf weight is transferred to the floor, not the frame
Rotation axisDetermined per project based on leaf width
FrameEreğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent
LeafEreğli A1 grade 1.5 + 1.5 mm (0.118" total) omega-bent, monoblock-reinforced pan system
Leaf thicknessBare metal 70 mm (2.76") — 90 mm (3.54") in total
Frame reinforcementLock area and bearing seats reinforced with 3 mm (0.118") DKP steel sheet
Leaf reinforcementLock area and pivot shaft surround reinforced with 3 mm (0.118") angle bar
Infill80 kg/m³ rock wool
Lock systemOptional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock
Access systemOptional card, keypad or fingerprint entry
GlassŞişecam 5+5 mm (0.394" total) laminated glass (impact resistant)
GasketSilicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf
Finish optionsPowder coating, natural wood, marine plywood, iroko wood or composite compact laminate
Accessoriesfirst-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions)
Floor preparationPreparation is required where the bottom bearing sits — assessed during site survey
Required clearanceClearance is needed in both directions, as the leaf swings both inward and outward
InstallationInstalled by aligning the floor and ceiling bearings; one-piece frame, fixed with M8 bolts
ProductionManufactured to custom on-site measurements
WarrantyUnlimited coverage for manufacturing defects — 2-year official warranty certificate

Frequently Asked Questions

What is the lead time for a custom villa door?

Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.

How are steel doors packaged for sea freight export?

Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.

What measurements do you need to quote?

The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.

Can you manufacture to imperial (inch) dimensions?

Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.

Who installs the door at the destination?

Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.

What export documents travel with the shipment?

Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.

You May Also Like

Before you decide

Pages where we cover the technical questions most often asked about this model: