Honey-toned pivot leaf with a horizontal lamella texture, with narrow vertical glass alongside. Product code: TR300. Manufactured to measure after an on-site survey.
- Leaf construction
- pivot single leaf + side glass
- Color / finish
- honey-toned wood
- Handle
- recessed handle
- Design language
- modern pivot
- Upper section
- glazed transom window
Pre-Order & Price Request
This model is made to measure. Leave your request and we'll call you to arrange a site survey.
- Survey and measurement are free
- Same-day response
- Made in our own factory
- Lifetime manufacturing warranty
The TR300 horizontal wood honey-toned pivot steel door is produced as a honey-toned pivot leaf with a horizontal lamella texture, with narrow vertical glass alongside. Like every door we make, this model is produced to custom measurements; no ready-made leaf is supplied from stock.
Product Code: TR300
Leaf, Glass, and Pediment
The leaf configuration is a single pivot leaf with a side glass panel. The leaf shows a horizontal wood lamella texture. The catalog color is a honey wood tone.
The glass section is a narrow vertical side glass. A glazed transom window sits above. This model uses a recessed handle. The color, pattern, and handle can be adjusted to suit the project; the options are compared on our coating options page.
The design language is best described as modern pivot.
Who Is This Model For?
It is typically used for villa entrances and wide-fronted detached houses. It is designed for wide openings: the side sections both fill the width and bring extra light into the entrance. Because the load rests on the floor pivot rather than on hinges, the leaf can be considerably wider and thicker. Since it needs clearance to swing, it isn't suitable for narrow entrances that open directly onto a staircase; the conditions are listed on our when to choose a pivot door page.
Measurement, Production, and Installation
We take the measurement during the site survey — it's based on the door opening, not the existing leaf; the method is explained on our how measurements are taken page. You'll find this model's frame, leaf, and lock specifications in the table below; our lock systems and galvanized vs. DKP steel pages break down the options. Our maintenance and lifespan and warranty and service terms apply after installation.
Frequently Asked Questions
How much does the model with code TR300 cost?
The price can't be quoted without a measurement. The size of the door opening, the finish, the glass, and the lock you choose directly affect the cost; the site survey is free, and a detailed quote follows. See our steel door prices page for details.
Can the color of the TR300 door be changed?
Yes, it can. Honey-toned wood is simply the finish shown in the photo, not a fixed option — you can choose from the alternatives on our coating options page.
Can the glass be changed on the TR300 model?
Yes. The glass shown is this model's catalog finish; using Şişecam 5+5 mm laminated glass, it can be produced in different colors and patterns. A version without glass is also possible.
How is the measurement taken for TR300?
We take the measurement during the site survey; nothing is expected from you. The measurement is taken from the door opening, not the existing leaf — we explain the method on our how measurements are taken page.
How can I order the model with code TR300?
You can fill out the pre-order form on our site or call us at 0532 689 21 46. Mentioning the TR300 product code speeds up the process. You can browse other pivot steel door models on our pivot steel door models page.
Specifications
| Product code | TR300 |
| Category | Pivot Steel Door Models |
| Leaf construction | pivot single leaf + side glass |
| Color / finish | honey-toned wood |
| Surface pattern | horizontal wood slat texture |
| Handle | recessed handle |
| Upper section | glazed transom window |
| Design language | modern pivot |
| Mechanism | Floor- and ceiling-mounted pivot (rotating) mechanism |
| Rotation system | Floor and ceiling bearings — no conventional hinges used |
| Load transfer | Leaf weight is transferred to the floor, not the frame |
| Rotation axis | Determined per project based on leaf width (central or offset) |
| Floor preparation | Preparation is required where the bottom bearing sits — assessed during site survey |
| Required clearance | Clearance is needed in both directions, as the leaf swings both inward and outward |
| Maximum leaf | Custom project-based sizing — tall and wide leaf production |
| Sheet thickness | Frame 2 mm (0.079"), leaf 1.5+1.5 mm (0.118" total) DKP steel sheet (Ereğli A1) |
| Frame | Ereğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent |
| Frame reinforcement | Lock area and bearing seats reinforced with 3 mm (0.118") DKP steel sheet |
| Leaf | Ereğli A1 grade 1.5 mm (0.059") + 1.5 mm (0.059") omega-bent, monoblock-reinforced pan system |
| Leaf reinforcement | Lock area and pivot shaft surround reinforced with 3 mm (0.118") angle bar |
| Leaf thickness | Bare metal 70 mm (2.76") — 90 mm (3.54") in total |
| Infill | 80 kg/m³ rock wool |
| Lock surround | integrated with 1 mm (0.039") grade 304 stainless steel |
| Gasket | Silicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf (insect-, dust- and airtight) |
| Surface finish | 10 mm (0.394") Camsan first-grade iroko |
| Finish options | Powder coating, natural wood, marine plywood, iroko wood or composite compact laminate |
| Varnish | Polyurethane infill, 90-micron coverage rating |
| Polish | Akzo Nobel |
| Accessories | first-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions) |
| Installation | Installed by aligning the floor and ceiling bearings; one-piece frame, fixed with M8 bolts |
| Frame-to-wall gap | 1 cm (0.394"), filled with polyurethane foam |
| Production | Manufactured to custom on-site measurements |
| Warranty | Unlimited coverage for manufacturing defects — 2-year official warranty certificate |
| Lock system | Optional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock |
| Glass section | narrow vertical side glass |
| Glass type | Şişecam 5+5 mm (0.394" total) laminated glass (impact resistant) |
Frequently Asked Questions
What is the lead time for a custom villa door?
Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.
How are steel doors packaged for sea freight export?
Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.
What measurements do you need to quote?
The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.
Can you manufacture to imperial (inch) dimensions?
Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.
Who installs the door at the destination?
Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.
What export documents travel with the shipment?
Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.
- • A free on-site survey is carried out before ordering to measure the door opening.
- • Production follows the dimensions and finish you approve after the survey.
- • Installation is carried out on-site by our own team.
- • Our warranty against manufacturing and workmanship defects is unlimited; an official 2-year warranty document is provided on delivery.
- • Price incl. VAT: %20 Includes VAT.
You May Also Like
Before you decide
Pages where we cover the technical questions most often asked about this model:
modern design
More Models in This Style

Geometric Diamond Orange Red Walnut Steel Door C-TR730

Diamond-Motif Dark Brown Steel Door C-TR726

Circle Medallion Dark Burgundy Brown Steel Door C-TR720

Tall Vertical Dark Burgundy Gloss Steel Door C-TR718
wood tone
Models in the Same Color Family

Three-Section Honey Walnut Steel Door C-TR731

Geometric Diamond Orange Red Walnut Steel Door C-TR730

Two-Section Paneled Dark Walnut Antiqued Steel Door C-TR729





