Custom manufacturing and worldwide export — request a quote: +90 532 689 21 46
Bayrakdoor Steel Doors
Bayrakdoor

Clean-Lined Honey Wood Pivot Steel Door TR329

Product CodeTR329

Honey-toned clean-lined pivot leaf with a narrow vertical glass strip at its edge. Product code: TR329. Made to measure after an on-site survey.

Leaf construction
pivot single leaf + narrow glass
Color / finish
honey-toned wood
Handle
stainless steel handle
Design language
minimal pivot
Share this model

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeTR329

This is here to block automated submissions — it only takes a second.

  • Survey and measurement are free
  • Same-day response
  • Made in our own factory
  • Lifetime manufacturing warranty
Download this model's PDF spec sheet
Worldwide shipping & export
Made in our own factory
Lifetime manufacturing warranty

TR329 is a pivot steel door model distinguished by its honey-toned clean-lined pivot leaf with a narrow vertical glass strip at its edge. Every door is made to your dimensions; whatever the width and height of your entrance, the leaf is produced to match. The image shows the honey wood finish.

Product Code: TR329

Surface and Glazing

Produced as a pivot single leaf with a narrow glass strip. The surface detailing is a flat, unadorned face. The surface is finished in honey wood.

The model features a narrow vertical glass strip. A stainless steel handle was chosen for this model. The finish in the image is the catalog selection — a different surface can be chosen from our cladding options.

Its design language is defined as minimal pivot.

Suitable Entrances

It is chosen primarily for office and plaza entrances and villa entrances. The single-leaf layout adapts directly to conventional door openings. Since the load rests on the floor rather than on hinges, the leaf can be far wider and thicker. Because it needs swing clearance, it does not suit narrow entrances that open directly onto stairs; the conditions are listed on our when to choose a pivot door page.

From Measurement to Installation

Measurements are taken from the door opening, not the existing leaf; we describe the process step by step on our how to measure page. Frame, sheet thickness, infill and lock values are listed in the specification table below. Sheet steel choices are compared on the galvanized or DKP sheet steel page, lock alternatives on the lock systems page. Maintenance steps that extend the door's life are on the care and lifespan page, and the coverage itself on the warranty and service page.

Frequently Asked Questions

How is the price of the TR329 determined?

The price cannot be quoted before measuring. The opening's dimensions and your cladding, glass and lock choices directly affect the total; the survey is free and is followed by an itemized quote. See steel door prices for details.

Can I order this model in a color other than honey wood?

Yes — the color is not fixed. The catalog shows honey wood, but the cladding is decided per project; on our cladding options page we cover which surface works best where.

Can the glass pattern be different?

Yes. The glass shown is this model's catalog finish; it can be produced in different colors and patterns, provided Şişecam 5+5 mm laminated glass is used. A glassless version is also possible.

How is the TR329 measured?

Our survey team measures on site. If you would still like to know the process, our how to measure page explains the three points we measure from.

How do I get a quote for the TR329?

You can fill out the pre-order form on our site or reach us at 0532 689 21 46. Mentioning product code TR329 in your request speeds things up. You can browse other pivot steel door models on our pivot steel door models page.

Specifications

Product codeTR329
CategoryPivot Steel Door Models
Leaf constructionpivot single leaf + narrow glass
Color / finishhoney-toned wood
Surface patternsmooth plain surface
Handlestainless steel handle
Design languageminimal pivot
MechanismFloor- and ceiling-mounted pivot (rotating) mechanism
Rotation systemFloor and ceiling bearings — no conventional hinges used
Load transferLeaf weight is transferred to the floor, not the frame
Rotation axisDetermined per project based on leaf width (central or offset)
Floor preparationPreparation is required where the bottom bearing sits — assessed during site survey
Required clearanceClearance is needed in both directions, as the leaf swings both inward and outward
Maximum leafCustom project-based sizing — tall and wide leaf production
Sheet thicknessFrame 2 mm (0.079"), leaf 1.5+1.5 mm (0.118" total) DKP steel sheet (Ereğli A1)
FrameEreğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent
Frame reinforcementLock area and bearing seats reinforced with 3 mm (0.118") DKP steel sheet
LeafEreğli A1 grade 1.5 mm (0.059") + 1.5 mm (0.059") omega-bent, monoblock-reinforced pan system
Leaf reinforcementLock area and pivot shaft surround reinforced with 3 mm (0.118") angle bar
Leaf thicknessBare metal 70 mm (2.76") — 90 mm (3.54") in total
Infill80 kg/m³ rock wool
Lock surroundintegrated with 1 mm (0.039") grade 304 stainless steel
GasketSilicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf (insect-, dust- and airtight)
Surface finish10 mm (0.394") Camsan first-grade iroko
Finish optionsPowder coating, natural wood, marine plywood, iroko wood or composite compact laminate
VarnishPolyurethane infill, 90-micron coverage rating
PolishAkzo Nobel
Accessoriesfirst-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions)
InstallationInstalled by aligning the floor and ceiling bearings; one-piece frame, fixed with M8 bolts
Frame-to-wall gap1 cm (0.394"), filled with polyurethane foam
ProductionManufactured to custom on-site measurements
WarrantyUnlimited coverage for manufacturing defects — 2-year official warranty certificate
Lock systemOptional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock
Glass sectionnarrow vertical glass
Glass typeŞişecam 5+5 mm (0.394" total) laminated glass (impact resistant)

Frequently Asked Questions

What is the lead time for a custom villa door?

Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.

How are steel doors packaged for sea freight export?

Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.

What measurements do you need to quote?

The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.

Can you manufacture to imperial (inch) dimensions?

Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.

Who installs the door at the destination?

Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.

What export documents travel with the shipment?

Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.

You May Also Like

Before you decide

Pages where we cover the technical questions most often asked about this model:

minimalist design

More Models in This Style

View All

wood tone

Models in the Same Color Family

View All