Custom manufacturing and worldwide export — request a quote: +90 532 689 21 46
Bayrakdoor Steel Doors

Concrete-Look Grey Glazed Pivot Door BY-322

Product CodeBY-322

Concrete-Look Grey Glazed Pivot Door. Product code: BY-322. Made to measure after an on-site survey.

Leaf construction
single leaf
Color / finish
concrete grey
Glass
Şişecam 5+5 mm (0.394" total) laminated glass (impact resistant)
Design language
modern pivot
Share this model

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeBY-322

This is here to block automated submissions — it only takes a second.

  • Survey and measurement are free
  • Same-day response
  • Made in our own factory
  • Lifetime manufacturing warranty
Download this model's PDF spec sheet
Worldwide shipping & export
Made in our own factory
Lifetime manufacturing warranty

The model on this page is the concrete-look grey glazed pivot door; its code is BY-322. It is not sold in standard sizes; your entrance is measured on site and the leaf is built to that measurement.

Product Code: BY-322

Pattern and Colour

The leaf configuration is single leaf. The leaf is built as a concrete-look grey composition with glazing. The catalogue colour is a concrete grey tone.

Cladding and hardware are not fixed; it can be produced with any of the alternatives on the cladding options page.

The design language is best described as modern pivot.

Who Is This Model For?

It is the first choice for villa entrances and for hotel and showroom entrances. The monolithic leaf presents a seamless surface from the outside. Because the weight rests on the floor rather than on hinges, the leaf can be far wider and thicker. Since it needs swing clearance, it is not suitable for narrow entrances that open directly onto a staircase; the requirements are listed on the when to choose a pivot door page.

Production and Installation

We take the measurements during the on-site survey — based on the door opening, not the existing leaf; the method is explained on the how to measure page. You can find this model's frame, leaf and lock specifications in the table below; the lock systems and galvanized or DKP sheet steel pages detail the options. After installation, the care and lifespan and warranty and service terms apply.

Frequently Asked Questions

How much does BY-322 cost?

There is no fixed price — since every leaf is made to measure, the amount varies with the dimensions, the cladding and the lock you choose. After the survey we send a written, itemized quote. The cost items are detailed on the steel door prices page.

Can BY-322 be produced in a different colour?

Yes — the colour is not fixed. The catalogue shows concrete grey, but the cladding is decided per project; on the cladding options page we explain which surface works best where.

How is BY-322 measured?

Our survey team measures on site. If you would still like to know how it works, the how to measure page explains the three points we measure from.

How can I order model BY-322?

You can fill in the pre-order form on our website or call us on 0532 689 21 46. Quoting product code BY-322 in your request helps us respond faster. You can browse our other pivot steel door models on the pivot steel door models page.

Specifications

Product codeBY-322
CategoryPivot Steel Door Models
Color / finishconcrete grey
Design languagemodern pivot
Leaf constructionsingle leaf
Rotation systemFloor and ceiling bearings — no conventional hinges used
Load transferLeaf weight is transferred to the floor, not the frame
Rotation axisDetermined per project based on leaf width
FrameEreğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent
LeafEreğli A1 grade 1.5 + 1.5 mm (0.118" total) omega-bent, monoblock-reinforced pan system
Leaf thicknessBare metal 70 mm (2.76") — 90 mm (3.54") in total
Frame reinforcementLock area and bearing seats reinforced with 3 mm (0.118") DKP steel sheet
Leaf reinforcementLock area and pivot shaft surround reinforced with 3 mm (0.118") angle bar
Infill80 kg/m³ rock wool
Lock systemOptional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock
Access systemOptional card, keypad or fingerprint entry
GlassŞişecam 5+5 mm (0.394" total) laminated glass (impact resistant)
GasketSilicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf
Finish optionsPowder coating, natural wood, marine plywood, iroko wood or composite compact laminate
Accessoriesfirst-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions)
Floor preparationPreparation is required where the bottom bearing sits — assessed during site survey
Required clearanceClearance is needed in both directions, as the leaf swings both inward and outward
InstallationInstalled by aligning the floor and ceiling bearings; one-piece frame, fixed with M8 bolts
ProductionManufactured to custom on-site measurements
WarrantyUnlimited coverage for manufacturing defects — 2-year official warranty certificate

Frequently Asked Questions

What is the lead time for a custom villa door?

Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.

How are steel doors packaged for sea freight export?

Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.

What measurements do you need to quote?

The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.

Can you manufacture to imperial (inch) dimensions?

Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.

Who installs the door at the destination?

Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.

What export documents travel with the shipment?

Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.

You May Also Like

Before you decide

Pages where we cover the technical questions most often asked about this model: