Custom manufacturing and worldwide export — request a quote: +90 532 689 21 46
Bayrakdoor Steel Doors

Frosted Glass Grey Pivot Villa Door BY-34

Product CodeBY-34

Frosted Glass Grey Pivot Villa Door. Product code: BY-34. Made to measure after an on-site survey.

Leaf construction
single leaf
Color / finish
grey
Glass
Şişecam 5+5 mm (0.394" total) laminated glass (impact resistant)
Design language
modern pivot
Share this model

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeBY-34

This is here to block automated submissions — it only takes a second.

  • Survey and measurement are free
  • Same-day response
  • Made in our own factory
  • Lifetime manufacturing warranty
Download this model's PDF spec sheet
Worldwide shipping & export
Made in our own factory
Lifetime manufacturing warranty

The model on this page is the frosted glass grey pivot villa door; its code is BY-34. There is no standard size — the door opening is measured during the survey and production follows that measurement.

Product Code: BY-34

Surface Pattern and Finish

The leaf configuration is single leaf. The leaf is built with frosted glazing. The catalogue colour is a grey tone.

Colour, pattern and handle choices can be adapted to your project; the options are compared on the cladding options page.

The design language is best described as modern pivot.

Who Is This Model For?

It is most often used for villa entrances and for office and plaza entrances. Its single leaf layout fits standard-width entrances. Because the weight rests on the floor rather than on hinges, the leaf can be far wider and thicker. Since it needs swing clearance, it is not suitable for narrow entrances that open directly onto a staircase; the requirements are listed on the when to choose a pivot door page.

Measurement, Production and Installation

Measurements are taken from the door opening, not the existing leaf; the how to measure page walks through it step by step. Frame, sheet thickness, infill and lock specifications are listed in the table below. Sheet steel choices are compared on the galvanized or DKP sheet steel page, and lock alternatives on the lock systems page. The care steps that extend the door's service life are on the care and lifespan page, and coverage details are on the warranty and service page.

Frequently Asked Questions

How is the price of BY-34 determined?

We do not publish a list price, because every door is made to measure. The final amount depends on the size of the opening and the cladding, glass and lock you choose. After a free on-site survey we provide a written, itemized quote; the steel door prices page explains what drives the price.

Can the colour of BY-34 be changed?

Yes, it can. Grey is simply the finish in the photo, not a fixed choice — you can pick from the alternatives on the cladding options page.

How is BY-34 measured?

Our survey team measures on site. If you would still like to know how it works, the how to measure page explains the three points we measure from.

How can I order model BY-34?

You can fill in the pre-order form on our website or call us on 0532 689 21 46. Quoting product code BY-34 in your request helps us respond faster. You can browse our other pivot steel door models on the pivot steel door models page.

Specifications

Product codeBY-34
CategoryPivot Steel Door Models
Color / finishgrey
Design languagemodern pivot
Leaf constructionsingle leaf
Rotation systemFloor and ceiling bearings — no conventional hinges used
Load transferLeaf weight is transferred to the floor, not the frame
Rotation axisDetermined per project based on leaf width
FrameEreğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent
LeafEreğli A1 grade 1.5 + 1.5 mm (0.118" total) omega-bent, monoblock-reinforced pan system
Leaf thicknessBare metal 70 mm (2.76") — 90 mm (3.54") in total
Frame reinforcementLock area and bearing seats reinforced with 3 mm (0.118") DKP steel sheet
Leaf reinforcementLock area and pivot shaft surround reinforced with 3 mm (0.118") angle bar
Infill80 kg/m³ rock wool
Lock systemOptional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock
Access systemOptional card, keypad or fingerprint entry
GlassŞişecam 5+5 mm (0.394" total) laminated glass (impact resistant)
GasketSilicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf
Finish optionsPowder coating, natural wood, marine plywood, iroko wood or composite compact laminate
Accessoriesfirst-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions)
Floor preparationPreparation is required where the bottom bearing sits — assessed during site survey
Required clearanceClearance is needed in both directions, as the leaf swings both inward and outward
InstallationInstalled by aligning the floor and ceiling bearings; one-piece frame, fixed with M8 bolts
ProductionManufactured to custom on-site measurements
WarrantyUnlimited coverage for manufacturing defects — 2-year official warranty certificate

Frequently Asked Questions

What is the lead time for a custom villa door?

Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.

How are steel doors packaged for sea freight export?

Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.

What measurements do you need to quote?

The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.

Can you manufacture to imperial (inch) dimensions?

Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.

Who installs the door at the destination?

Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.

What export documents travel with the shipment?

Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.

You May Also Like

Before you decide

Pages where we cover the technical questions most often asked about this model: