Horizontal Chrome-Banded Dark Walnut Double-Leaf Pivot Door BY-147
Horizontal chrome-banded dark walnut double-leaf pivot door. Product code: BY-147. Custom-built to measure after an on-site survey.
- Leaf construction
- double leaf
- Color / finish
- dark walnut
- Design language
- luxury pivot
Pre-Order & Price Request
This model is made to measure. Leave your request and we'll call you to arrange a site survey.
- Survey and measurement are free
- Same-day response
- Made in our own factory
- Lifetime manufacturing warranty
BY-147 is the product code for the horizontal chrome-banded dark walnut double-leaf pivot door in our catalog. It isn't sold in ready-made sizes; your entrance is measured on site, and the leaf is manufactured to that measurement. The photo shows the dark walnut finish.
Product Code: BY-147
Panel Surface
The model is configured as a double leaf. The model features a horizontal, chrome-banded panel. Dark walnut is applied as the color.
The finish shown is simply the catalog's default — a different finish can be chosen from the finish options.
The design language is best described as luxury pivot.
Suitable Entrances
It's typically used for hotel and showroom entrances and wide-frontage detached houses projects. Because the side sections widen the opening, it suits wide-fronted entrances rather than narrow ones — and it lets daylight into the hall as well. Since the load rests on the floor rather than the hinges, the leaf can be considerably wider and thicker. It needs clearance to swing, so it isn't suitable for narrow entrances that open directly onto a staircase; the conditions are listed on the when a pivot door makes sense page.
From Measurement to Installation
We take the measurement during the survey — it's based on the door opening, not the existing leaf; the method is explained on the how we take the measurement page. You'll find this model's frame, leaf, and lock specifications in the table below; the lock systems and galvanized vs. cold-rolled steel pages go into the options in more detail. After installation, the maintenance and lifespan guidance and warranty and service terms apply.
Frequently Asked Questions
How is the price of BY-147 determined?
There's no fixed price — since every leaf is manufactured to measure, the amount varies with the size, the finish, and the lock you select. We send a detailed written quote after the survey. We've broken down the cost items on the steel door prices page.
Can I order this model in a color other than dark walnut?
It can be. Dark walnut is simply the finish shown in the photo, not a fixed choice — you can pick from the alternatives on the finish options page.
How is the measurement taken for BY-147?
We take the measurement during the site survey — no action is needed from you. It's the door opening that's measured, not the existing leaf; we've explained the method on the how we take the measurement page.
How do I get a quote for BY-147?
You can fill out the pre-order form on the site, or call us at 0532 689 21 46. Mentioning the BY-147 product code in your request speeds things up. You can browse other models on the pivot steel door models page.
Specifications
| Product code | BY-147 |
| Category | Pivot Steel Door Models |
| Color / finish | dark walnut |
| Design language | luxury pivot |
| Leaf construction | double leaf |
| Rotation system | Floor and ceiling bearings — no conventional hinges used |
| Load transfer | Leaf weight is transferred to the floor, not the frame |
| Rotation axis | Determined per project based on leaf width |
| Frame | Ereğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent |
| Leaf | Ereğli A1 grade 1.5 + 1.5 mm (0.118" total) omega-bent, monoblock-reinforced pan system |
| Leaf thickness | Bare metal 70 mm (2.76") — 90 mm (3.54") in total |
| Frame reinforcement | Lock area and bearing seats reinforced with 3 mm (0.118") DKP steel sheet |
| Leaf reinforcement | Lock area and pivot shaft surround reinforced with 3 mm (0.118") angle bar |
| Infill | 80 kg/m³ rock wool |
| Lock system | Optional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock |
| Access system | Optional card, keypad or fingerprint entry |
| Gasket | Silicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf |
| Finish options | Powder coating, natural wood, marine plywood, iroko wood or composite compact laminate |
| Accessories | first-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions) |
| Floor preparation | Preparation is required where the bottom bearing sits — assessed during site survey |
| Required clearance | Clearance is needed in both directions, as the leaf swings both inward and outward |
| Installation | Installed by aligning the floor and ceiling bearings; one-piece frame, fixed with M8 bolts |
| Production | Manufactured to custom on-site measurements |
| Warranty | Unlimited coverage for manufacturing defects — 2-year official warranty certificate |
Frequently Asked Questions
What is the lead time for a custom villa door?
Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.
How are steel doors packaged for sea freight export?
Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.
What measurements do you need to quote?
The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.
Can you manufacture to imperial (inch) dimensions?
Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.
Who installs the door at the destination?
Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.
What export documents travel with the shipment?
Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.
- • A free on-site survey is carried out before ordering to measure the door opening.
- • Production follows the dimensions and finish you approve after the survey.
- • Installation is carried out on-site by our own team.
- • Our warranty against manufacturing and workmanship defects is unlimited; an official 2-year warranty document is provided on delivery.
- • Price incl. VAT: %20 Includes VAT.
You May Also Like
Before you decide
Pages where we cover the technical questions most often asked about this model:




