Custom manufacturing and worldwide export — request a quote: +90 532 689 21 46
Bayrakdoor Steel Doors

Horizontal-Grain Honey Pivot Door with Side Lights BY-252

Product CodeBY-252

Horizontal-Grain Honey Pivot Door with Side Lights. Product code: BY-252. Manufactured to custom measurements following an on-site survey.

Leaf construction
single leaf
Color / finish
honey tone
Glass
Şişecam 5+5 mm (0.394" total) laminated glass (impact resistant)
Design language
modern pivot
Share this model

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeBY-252

This is here to block automated submissions — it only takes a second.

  • Survey and measurement are free
  • Same-day response
  • Made in our own factory
  • Lifetime manufacturing warranty
Download this model's PDF spec sheet
Worldwide shipping & export
Made in our own factory
Lifetime manufacturing warranty

The model on this page is the horizontal-grain honey pivot door with side lights, coded BY-252. It is not sold in standard sizes; your entrance is measured on site and the leaf is manufactured to that measurement. The catalog finish is a honey tone.

Product Code: BY-252

Leaf Surface

The leaf layout is a single leaf. The surface treatment takes the form of a horizontal grain with side lights. The catalog color is a honey tone.

Color, pattern, and handle selection can all be adjusted to fit the project; we compare the options on our finish options page.

The design language is best described as modern pivot.

Who Is This Model For?

Villa entrances and hotel and showroom entrances are the typical settings for this model. The single-piece leaf presents an unbroken surface when viewed from outside. In a pivot system the leaf's weight is carried down to the floor, so a taller and heavier leaf can be supported than with a hinged door. As the leaf swings it takes up space both in front and behind, so the entrance needs to allow for that clearance — details are on our when to choose a pivot door page.

From Measurement to Installation

Measurements are taken from the door opening, not the existing leaf; we walk through exactly how on our how to measure page. Frame, sheet-steel thickness, infill, and lock specifications are listed in the specification table below. The choice of sheet steel is compared on our galvanized vs. DKP steel page, and lock alternatives on our lock systems page. After delivery, our warranty and service coverage applies; for keeping the surface in good condition, see our maintenance and lifespan page.

Frequently Asked Questions

How much does the BY-252 model cost?

There is no fixed price — since every leaf is manufactured to measurement, the cost depends on the size, the finish, and the lock you choose. We send a written, itemized quote after the survey. We break down the cost items on our steel door prices page.

Can BY-252 be produced in a different color?

Yes. The honey finish shown is the catalog selection for this model; it can be produced in different colors using compact laminate, composite, water-transfer, or wood-look finish options. We compare the options on our finish options page.

How does the measurement stage work when ordering BY-252?

Our survey team measures on site. If you'd still like to understand the process, we explain the three key points we measure on our how to measure page.

How can I order the BY-252 model?

You can fill out the pre-order form on our site or call us at 0532 689 21 46. Mentioning the BY-252 product code speeds up the process. You can browse other pivot steel door models on our pivot steel door models page.

Specifications

Product codeBY-252
CategoryPivot Steel Door Models
Color / finishhoney tone
Design languagemodern pivot
Leaf constructionsingle leaf
Rotation systemFloor and ceiling bearings — no conventional hinges used
Load transferLeaf weight is transferred to the floor, not the frame
Rotation axisDetermined per project based on leaf width
FrameEreğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent
LeafEreğli A1 grade 1.5 + 1.5 mm (0.118" total) omega-bent, monoblock-reinforced pan system
Leaf thicknessBare metal 70 mm (2.76") — 90 mm (3.54") in total
Frame reinforcementLock area and bearing seats reinforced with 3 mm (0.118") DKP steel sheet
Leaf reinforcementLock area and pivot shaft surround reinforced with 3 mm (0.118") angle bar
Infill80 kg/m³ rock wool
Lock systemOptional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock
Access systemOptional card, keypad or fingerprint entry
GlassŞişecam 5+5 mm (0.394" total) laminated glass (impact resistant)
GasketSilicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf
Finish optionsPowder coating, natural wood, marine plywood, iroko wood or composite compact laminate
Accessoriesfirst-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions)
Floor preparationPreparation is required where the bottom bearing sits — assessed during site survey
Required clearanceClearance is needed in both directions, as the leaf swings both inward and outward
InstallationInstalled by aligning the floor and ceiling bearings; one-piece frame, fixed with M8 bolts
ProductionManufactured to custom on-site measurements
WarrantyUnlimited coverage for manufacturing defects — 2-year official warranty certificate

Frequently Asked Questions

What is the lead time for a custom villa door?

Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.

How are steel doors packaged for sea freight export?

Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.

What measurements do you need to quote?

The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.

Can you manufacture to imperial (inch) dimensions?

Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.

Who installs the door at the destination?

Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.

What export documents travel with the shipment?

Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.

You May Also Like

Before you decide

Pages where we cover the technical questions most often asked about this model: