Horizontal-Grain Light Wood Double-Leaf Pivot Door BY-125

Product CodeBY-125

Horizontal-Grain Light Wood Double-Leaf Pivot Door. Product code: BY-125. Manufactured to custom measurements following an on-site survey.

Leaf construction: double leaf
Color / finish: light wood
Design language: modern pivot

Share this model

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeBY-125

Survey and measurement are free
Same-day response
Made in our own factory
Lifetime manufacturing warranty

+90 532 689 21 46 WhatsApp

Download this model's PDF spec sheet

Worldwide shipping & export

Made in our own factory

Lifetime manufacturing warranty

#pivot steel door #pivot door #by-125 #made-to-measure steel door #modern pivot door #light wood #large-format entrance door #double-leaf pivot door

BY-125 is the product code for the horizontal-grain light wood double-leaf pivot door in our catalog. It is not sold in standard sizes; your entrance is measured on site and the leaf is manufactured to that measurement. The photo shows the light wood finish.

Product Code: BY-125

Leaf Surface

The model is configured as a double leaf. The model features a horizontal wood-grain leaf. Light wood is applied as the color.

Color, pattern, and handle selection can all be adjusted to fit the project; we compare the options on our finish options page.

The design language is best described as modern pivot.

Suitable Entrances

It is typically used in hotel and showroom entrance and wide-fronted detached house projects. The side panels allow wide door openings to be filled with a single, unified configuration. The leaf pivots on bearings set into the floor and the head frame, which makes it possible to carry sizes a hinge could not support. In return, it requires clearance to swing both in front of and behind the door. Our when to choose a pivot door page explains which entrances are suitable.

From Measurement to Installation

Production begins with an on-site measurement. How the door opening is measured is explained on our how to measure page; material choices are covered on our galvanized vs. DKP steel and lock systems pages. The technical specifications for this model are given in the table below. After installation, our maintenance and lifespan and warranty and service terms apply.

Frequently Asked Questions

How is the price determined for BY-125?

We don't publish a list price, because every door is built to measurement. The cost is determined by the size of the door opening and the finish, glass, and lock you select. After a free survey, we provide a written, itemized quote; we explain what affects the price on our steel door prices page.

Can the color of the BY-125 door be changed?

Yes, the color is not fixed. The catalog shows light wood, but the finish is chosen to match your project; on our finish options page we explain which surface works best where.

How is the measurement taken for BY-125?

Measuring is our job. We measure the clear width of the door opening, the height from the finished floor, and the wall thickness; details are on our how to measure page.

How do I get a quote for BY-125?

You can fill out the pre-order form on our site or call us at 0532 689 21 46. Mentioning the BY-125 product code speeds up the process. You can browse other pivot steel door models on our pivot steel door models page.

Specifications

Product code	BY-125
Category	Pivot Steel Door Models
Color / finish	light wood
Design language	modern pivot
Leaf construction	double leaf
Rotation system	Floor and ceiling bearings — no conventional hinges used
Load transfer	Leaf weight is transferred to the floor, not the frame
Rotation axis	Determined per project based on leaf width
Frame	Ereğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent
Leaf	Ereğli A1 grade 1.5 + 1.5 mm (0.118" total) omega-bent, monoblock-reinforced pan system
Leaf thickness	Bare metal 70 mm (2.76") — 90 mm (3.54") in total
Frame reinforcement	Lock area and bearing seats reinforced with 3 mm (0.118") DKP steel sheet
Leaf reinforcement	Lock area and pivot shaft surround reinforced with 3 mm (0.118") angle bar
Infill	80 kg/m³ rock wool
Lock system	Optional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock
Access system	Optional card, keypad or fingerprint entry
Gasket	Silicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf
Finish options	Powder coating, natural wood, marine plywood, iroko wood or composite compact laminate
Accessories	first-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions)
Floor preparation	Preparation is required where the bottom bearing sits — assessed during site survey
Required clearance	Clearance is needed in both directions, as the leaf swings both inward and outward
Installation	Installed by aligning the floor and ceiling bearings; one-piece frame, fixed with M8 bolts
Production	Manufactured to custom on-site measurements
Warranty	Unlimited coverage for manufacturing defects — 2-year official warranty certificate

Frequently Asked Questions

What is the lead time for a custom villa door?

Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.

How are steel doors packaged for sea freight export?

Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.

What measurements do you need to quote?

The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.

Can you manufacture to imperial (inch) dimensions?

Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.

Who installs the door at the destination?

Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.

What export documents travel with the shipment?

Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.