Horizontal-Grain Red Walnut Wide Double-Leaf Pivot Door BY-232
Horizontal-grain red walnut wide double-leaf pivot door. Product code: BY-232. Custom-built to measure after an on-site survey.
- Leaf construction
- double leaf
- Color / finish
- red walnut
- Design language
- modern pivot
Pre-Order & Price Request
This model is made to measure. Leave your request and we'll call you to arrange a site survey.
- Survey and measurement are free
- Same-day response
- Made in our own factory
- Lifetime manufacturing warranty
The horizontal-grain red walnut wide double-leaf pivot door appears in our catalog under the code BY-232. It's manufactured to measure — whatever the width and height of your entrance, the leaf is built to match.
Product Code: BY-232
Panel Surface
The panel structure is double-leaf. The surface treatment is horizontal-grain and wide. The finish is a red walnut tone.
The finish shown is simply the catalog's default — a different finish can be chosen from the finish options.
The design language is best described as modern pivot.
Which Entrance Is It Suited For?
Wide-frontage detached houses and villa entrances are the typical settings for this model. Because the side sections widen the opening, it suits wide-fronted entrances rather than narrow ones — and it lets daylight into the hall as well. The leaf turns on pivots set into the floor and the head frame, which makes sizes possible that hinges simply couldn't carry. In return, it needs clearance to swing both in front of and behind the door. The when a pivot door makes sense page explains which entrances are suitable.
Measurement, Production, and Installation
The measurement is taken from the door opening, not the existing leaf; we've written out the step-by-step method on the how we take the measurement page. The frame, sheet-metal thickness, infill, and lock specifications are listed in the table below. The sheet-metal choice is compared on the galvanized vs. cold-rolled steel page, and lock alternatives on the lock systems page. The maintenance steps that extend the door's lifespan are on the maintenance and lifespan page, and the coverage details are on the warranty and service page.
Frequently Asked Questions
What is the price of the BY-232 model?
We can't quote a price before the measurement is taken. The size of the door opening, the finish, the glass, and the lock all directly affect the amount; the survey is free, and we follow it with an itemized quote. See steel door prices for details.
Can the color of the BY-232 door be changed?
Yes, the color isn't fixed. The catalog shows red walnut, but the finish is chosen to suit each project; on the finish options page we cover which surface works best where.
Do I need to take the measurement myself?
Our survey team measures on site. If you'd still like to know how it works, we've explained on the how we take the measurement page which three points we measure.
How can I order the BY-232 model?
You can fill out the pre-order form on the site, or call us at 0532 689 21 46. Mentioning the BY-232 product code in your request speeds things up. You can browse other models on the pivot steel door models page.
Specifications
| Product code | BY-232 |
| Category | Pivot Steel Door Models |
| Color / finish | red walnut |
| Design language | modern pivot |
| Leaf construction | double leaf |
| Rotation system | Floor and ceiling bearings — no conventional hinges used |
| Load transfer | Leaf weight is transferred to the floor, not the frame |
| Rotation axis | Determined per project based on leaf width |
| Frame | Ereğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent |
| Leaf | Ereğli A1 grade 1.5 + 1.5 mm (0.118" total) omega-bent, monoblock-reinforced pan system |
| Leaf thickness | Bare metal 70 mm (2.76") — 90 mm (3.54") in total |
| Frame reinforcement | Lock area and bearing seats reinforced with 3 mm (0.118") DKP steel sheet |
| Leaf reinforcement | Lock area and pivot shaft surround reinforced with 3 mm (0.118") angle bar |
| Infill | 80 kg/m³ rock wool |
| Lock system | Optional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock |
| Access system | Optional card, keypad or fingerprint entry |
| Gasket | Silicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf |
| Finish options | Powder coating, natural wood, marine plywood, iroko wood or composite compact laminate |
| Accessories | first-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions) |
| Floor preparation | Preparation is required where the bottom bearing sits — assessed during site survey |
| Required clearance | Clearance is needed in both directions, as the leaf swings both inward and outward |
| Installation | Installed by aligning the floor and ceiling bearings; one-piece frame, fixed with M8 bolts |
| Production | Manufactured to custom on-site measurements |
| Warranty | Unlimited coverage for manufacturing defects — 2-year official warranty certificate |
Frequently Asked Questions
What is the lead time for a custom villa door?
Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.
How are steel doors packaged for sea freight export?
Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.
What measurements do you need to quote?
The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.
Can you manufacture to imperial (inch) dimensions?
Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.
Who installs the door at the destination?
Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.
What export documents travel with the shipment?
Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.
- • A free on-site survey is carried out before ordering to measure the door opening.
- • Production follows the dimensions and finish you approve after the survey.
- • Installation is carried out on-site by our own team.
- • Our warranty against manufacturing and workmanship defects is unlimited; an official 2-year warranty document is provided on delivery.
- • Price incl. VAT: %20 Includes VAT.
You May Also Like
Before you decide
Pages where we cover the technical questions most often asked about this model:




