Custom manufacturing and worldwide export — request a quote: +90 532 689 21 46
Bayrakdoor Steel Doors

Horizontal Slat Red Walnut Glass-Front Wide Pivot Door BY-337

Product CodeBY-337

Horizontal Slat Red Walnut Glass-Front Wide Pivot Door. Product code: BY-337. Custom-manufactured to measure after an on-site survey.

Leaf construction
single leaf
Color / finish
red walnut
Glass
Şişecam 5+5 mm (0.394" total) laminated glass (impact resistant)
Design language
modern pivot
Share this model

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeBY-337

This is here to block automated submissions — it only takes a second.

  • Survey and measurement are free
  • Same-day response
  • Made in our own factory
  • Lifetime manufacturing warranty
Download this model's PDF spec sheet
Worldwide shipping & export
Made in our own factory
Lifetime manufacturing warranty

The horizontal-slat red walnut glass-front wide pivot door appears in our catalog under the code BY-337. Like every door in our range, this model is custom-made to measure; there is no ready-made leaf shipped from stock. The catalog finish is in a red walnut tone.

Product Code: BY-337

Leaf Surface

The leaf configuration is single-leaf. The surface treatment is a horizontal-slat, glass-front, wide-format style. The finish is in a red walnut tone.

Finish and hardware are not fixed; the door can be produced with any of the alternatives on our finish options page.

The design language is best described as modern pivot.

Which Entrances Does It Suit?

Detached houses with wide façades along with office and plaza entrances are the typical settings for this model. Its single-leaf configuration fits standard-width entrances. Because the load rests on the floor rather than on hinges, the leaf can be considerably wider and thicker. Since it needs clearance to swing, it isn't suitable for narrow entrances that open directly onto a staircase; the conditions are listed on our when to choose a pivot door page.

Production and Installation Process

We take the measurement during the site survey — it's based on the door opening, not the existing leaf; the method is explained on our how measurements are taken page. You'll find this model's frame, leaf, and lock specifications in the table below; our lock systems and galvanized vs. cold-rolled steel pages break down the options in detail. After installation, our maintenance and lifespan and warranty and service terms apply.

Frequently Asked Questions

How is the price for BY-337 determined?

We don't publish a list price, because the door is custom-made to measure. The total is determined by the size of the door opening and the chosen finish, glass, and lock. After a free site survey, we provide a written quote broken down item by item; we've explained what affects the price on our steel door prices page.

Can the color of the BY-337 door be changed?

Yes, the color isn't fixed. The catalog shows red walnut, but the finish is chosen per project; on our finish options page we've noted which surface looks best where.

Do I need to take the measurement myself?

Our survey team measures on site. If you'd still like to understand the process, we've listed the three points it's measured from on our how measurements are taken page.

How can I order the BY-337 model?

You can fill out the pre-order form on our site or call us at 0532 689 21 46. Mentioning the BY-337 product code speeds up the process. You can browse other pivot steel door models on our pivot steel door models page.

Specifications

Product codeBY-337
CategoryPivot Steel Door Models
Color / finishred walnut
Design languagemodern pivot
Leaf constructionsingle leaf
Rotation systemFloor and ceiling bearings — no conventional hinges used
Load transferLeaf weight is transferred to the floor, not the frame
Rotation axisDetermined per project based on leaf width
FrameEreğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent
LeafEreğli A1 grade 1.5 + 1.5 mm (0.118" total) omega-bent, monoblock-reinforced pan system
Leaf thicknessBare metal 70 mm (2.76") — 90 mm (3.54") in total
Frame reinforcementLock area and bearing seats reinforced with 3 mm (0.118") DKP steel sheet
Leaf reinforcementLock area and pivot shaft surround reinforced with 3 mm (0.118") angle bar
Infill80 kg/m³ rock wool
Lock systemOptional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock
Access systemOptional card, keypad or fingerprint entry
GlassŞişecam 5+5 mm (0.394" total) laminated glass (impact resistant)
GasketSilicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf
Finish optionsPowder coating, natural wood, marine plywood, iroko wood or composite compact laminate
Accessoriesfirst-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions)
Floor preparationPreparation is required where the bottom bearing sits — assessed during site survey
Required clearanceClearance is needed in both directions, as the leaf swings both inward and outward
InstallationInstalled by aligning the floor and ceiling bearings; one-piece frame, fixed with M8 bolts
ProductionManufactured to custom on-site measurements
WarrantyUnlimited coverage for manufacturing defects — 2-year official warranty certificate

Frequently Asked Questions

What is the lead time for a custom villa door?

Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.

How are steel doors packaged for sea freight export?

Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.

What measurements do you need to quote?

The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.

Can you manufacture to imperial (inch) dimensions?

Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.

Who installs the door at the destination?

Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.

What export documents travel with the shipment?

Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.

You May Also Like

Before you decide

Pages where we cover the technical questions most often asked about this model: