Custom manufacturing and worldwide export — request a quote: +90 532 689 21 46
Bayrakdoor Steel Doors

Side-Glazed Dark Walnut Pivot Door with White Frame BY-284

Product CodeBY-284

Side-Glazed Dark Walnut Pivot Door with White Frame. Product code: BY-284. Manufactured to measurement after an on-site survey.

Leaf construction
single leaf
Color / finish
dark walnut
Glass
Şişecam 5+5 mm (0.394" total) laminated glass (impact resistant)
Design language
modern pivot
Share this model

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeBY-284

This is here to block automated submissions — it only takes a second.

  • Survey and measurement are free
  • Same-day response
  • Made in our own factory
  • Lifetime manufacturing warranty
Download this model's PDF spec sheet
Worldwide shipping & export
Made in our own factory
Lifetime manufacturing warranty

BY-284 is the product code for the side-glazed dark walnut pivot door with a white frame in our catalog. It is not sold in standard sizes — your entrance is measured on site, and the leaf is manufactured to that exact measurement. The photo shows the dark walnut finish.

Product Code: BY-284

Surface Pattern and Finish

It is manufactured as a single leaf. The model features a side-glazed leaf with a white frame. Dark walnut is applied as the color.

Coating and hardware are not fixed; the model can be produced with alternatives from the coating options page.

The design language is described as modern pivot.

Suitable Entrances

It is primarily chosen for hotel/showroom entrances and wide-fronted detached houses. Its single-leaf configuration fits standard-width entrances. In a pivot system, the leaf's weight is transferred to the floor rather than to hinges, so a taller and heavier leaf can be supported than with a hinged door. Because the leaf sweeps clearance in front of and behind it as it turns, the entrance needs to accommodate that space — details are on the when to choose a pivot door page.

Production and Installation Process

Production begins with the on-site measurement. How the measurement is taken from the door opening is explained on the how measurements are taken page; material choices are covered on the galvanized vs. cold-rolled steel and lock systems pages. This model's technical specifications are in the table below. After delivery, the warranty and service coverage applies; see the maintenance and lifespan page for surface care.

Frequently Asked Questions

How is the price determined for BY-284?

We don't publish a list price, because each door is custom-made to measurement. The final amount is determined by the size of the door opening, the coating chosen, the glass, and the lock. After a free site survey, we provide a written, itemized quote; we've explained what affects the price on the steel door prices page.

Can I have this model made in a color other than dark walnut?

Yes, the color isn't fixed. The catalog shows dark walnut, but the coating is determined per project; we've written about which finish works best where on the coating options page.

How does the measurement stage work when ordering BY-284?

We take the measurement during the site survey; nothing is expected of you. The measurement is taken from the door opening, not the existing leaf — we've explained the method on the how measurements are taken page.

How do I get a quote for BY-284?

You can fill out the pre-order form on our site or call us at 0532 689 21 46. Mentioning the BY-284 product code speeds up the process. You can browse other pivot steel door models on our pivot steel door models page.

Specifications

Product codeBY-284
CategoryPivot Steel Door Models
Color / finishdark walnut
Design languagemodern pivot
Leaf constructionsingle leaf
Rotation systemFloor and ceiling bearings — no conventional hinges used
Load transferLeaf weight is transferred to the floor, not the frame
Rotation axisDetermined per project based on leaf width
FrameEreğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent
LeafEreğli A1 grade 1.5 + 1.5 mm (0.118" total) omega-bent, monoblock-reinforced pan system
Leaf thicknessBare metal 70 mm (2.76") — 90 mm (3.54") in total
Frame reinforcementLock area and bearing seats reinforced with 3 mm (0.118") DKP steel sheet
Leaf reinforcementLock area and pivot shaft surround reinforced with 3 mm (0.118") angle bar
Infill80 kg/m³ rock wool
Lock systemOptional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock
Access systemOptional card, keypad or fingerprint entry
GlassŞişecam 5+5 mm (0.394" total) laminated glass (impact resistant)
GasketSilicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf
Finish optionsPowder coating, natural wood, marine plywood, iroko wood or composite compact laminate
Accessoriesfirst-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions)
Floor preparationPreparation is required where the bottom bearing sits — assessed during site survey
Required clearanceClearance is needed in both directions, as the leaf swings both inward and outward
InstallationInstalled by aligning the floor and ceiling bearings; one-piece frame, fixed with M8 bolts
ProductionManufactured to custom on-site measurements
WarrantyUnlimited coverage for manufacturing defects — 2-year official warranty certificate

Frequently Asked Questions

What is the lead time for a custom villa door?

Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.

How are steel doors packaged for sea freight export?

Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.

What measurements do you need to quote?

The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.

Can you manufacture to imperial (inch) dimensions?

Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.

Who installs the door at the destination?

Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.

What export documents travel with the shipment?

Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.

You May Also Like

Before you decide

Pages where we cover the technical questions most often asked about this model: