Side-Glazed Light Walnut Wide-Leaf Pivot Door BY-187
Side-Glazed Light Walnut Wide-Leaf Pivot Door. Product code: BY-187. Manufactured to measurement after an on-site survey.
- Leaf construction
- single leaf
- Color / finish
- light walnut
- Glass
- Şişecam 5+5 mm (0.394" total) laminated glass (impact resistant)
- Design language
- modern pivot
Pre-Order & Price Request
This model is made to measure. Leave your request and we'll call you to arrange a site survey.
- Survey and measurement are free
- Same-day response
- Made in our own factory
- Lifetime manufacturing warranty
BY-187 is the product code for the side-glazed light walnut wide-leaf pivot door model in our catalog. It is not sold in standard sizes — your entrance is measured on site, and the leaf is manufactured to that exact measurement. The photo shows the light walnut finish.
Product Code: BY-187
Pattern and Color
It is manufactured as a single leaf. The model features a side-glazed, wide-leaf design. The surface is finished in light walnut.
Coating and hardware are not fixed; the model can be produced with alternatives from the coating options page.
The design language is described as modern pivot.
Where Is It Used?
Hotel and showroom entrances, along with wide-fronted detached houses, are the typical settings for this model. The single-leaf layout adapts directly to standard door openings. In a pivot system, the leaf's weight is transferred to the floor rather than to hinges, so a taller and heavier leaf can be supported than with a hinged door. Because the leaf sweeps clearance in front of and behind it as it turns, the entrance needs to accommodate that space — details are on the when to choose a pivot door page.
Measurement, Production, and Installation
We take the measurement during the site survey — it is based on the door opening, not the existing leaf; the method is explained on the how measurements are taken page. You can find this model's frame, leaf, and lock specifications in the table below; the lock systems and galvanized vs. cold-rolled steel pages detail the options. After delivery, the warranty and service coverage applies; see the maintenance and lifespan page for surface care.
Frequently Asked Questions
How much does the BY-187 model cost?
We don't publish a list price, because each door is custom-made to measurement. The final amount is determined by the size of the door opening, the coating chosen, the glass, and the lock. After a free site survey, we provide a written, itemized quote; we've explained what affects the price on the steel door prices page.
Can BY-187 be made in a different color?
Yes, it can be made. Light walnut is only the finish shown in the photo, not a fixed choice — you can select from the alternatives on the coating options page.
How is the measurement taken for BY-187?
Our survey team takes the measurement on site. Still, if you'd like to know the process, we've written which three points are measured on the how measurements are taken page.
How do I get a quote for BY-187?
You can fill out the pre-order form on our site or call us at 0532 689 21 46. Mentioning the BY-187 product code speeds up the process. You can browse other pivot steel door models on our pivot steel door models page.
Specifications
| Product code | BY-187 |
| Category | Pivot Steel Door Models |
| Color / finish | light walnut |
| Design language | modern pivot |
| Leaf construction | single leaf |
| Rotation system | Floor and ceiling bearings — no conventional hinges used |
| Load transfer | Leaf weight is transferred to the floor, not the frame |
| Rotation axis | Determined per project based on leaf width |
| Frame | Ereğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent |
| Leaf | Ereğli A1 grade 1.5 + 1.5 mm (0.118" total) omega-bent, monoblock-reinforced pan system |
| Leaf thickness | Bare metal 70 mm (2.76") — 90 mm (3.54") in total |
| Frame reinforcement | Lock area and bearing seats reinforced with 3 mm (0.118") DKP steel sheet |
| Leaf reinforcement | Lock area and pivot shaft surround reinforced with 3 mm (0.118") angle bar |
| Infill | 80 kg/m³ rock wool |
| Lock system | Optional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock |
| Access system | Optional card, keypad or fingerprint entry |
| Glass | Şişecam 5+5 mm (0.394" total) laminated glass (impact resistant) |
| Gasket | Silicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf |
| Finish options | Powder coating, natural wood, marine plywood, iroko wood or composite compact laminate |
| Accessories | first-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions) |
| Floor preparation | Preparation is required where the bottom bearing sits — assessed during site survey |
| Required clearance | Clearance is needed in both directions, as the leaf swings both inward and outward |
| Installation | Installed by aligning the floor and ceiling bearings; one-piece frame, fixed with M8 bolts |
| Production | Manufactured to custom on-site measurements |
| Warranty | Unlimited coverage for manufacturing defects — 2-year official warranty certificate |
Frequently Asked Questions
What is the lead time for a custom villa door?
Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.
How are steel doors packaged for sea freight export?
Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.
What measurements do you need to quote?
The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.
Can you manufacture to imperial (inch) dimensions?
Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.
Who installs the door at the destination?
Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.
What export documents travel with the shipment?
Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.
- • A free on-site survey is carried out before ordering to measure the door opening.
- • Production follows the dimensions and finish you approve after the survey.
- • Installation is carried out on-site by our own team.
- • Our warranty against manufacturing and workmanship defects is unlimited; an official 2-year warranty document is provided on delivery.
- • Price incl. VAT: %20 Includes VAT.
You May Also Like
Before you decide
Pages where we cover the technical questions most often asked about this model:




