Grey stone-textured, horizontal-strip-clad pivot leaf, integrated with a glass facade. Product code: TR323. Manufactured to measure, following an on-site survey.
- Leaf construction
- pivot single leaf
- Color / finish
- grey stone texture
- Handle
- recessed handle
- Design language
- modern pivot
Pre-Order & Price Request
This model is made to measure. Leave your request and we'll call you to arrange a site survey.
- Survey and measurement are free
- Same-day response
- Made in our own factory
- Lifetime manufacturing warranty
TR323 is a pivot steel door model distinguished by its grey stone-textured, horizontal-strip-clad pivot leaf, integrated with a glass facade. It's manufactured to measure — whatever the width and height of your entrance, the leaf is built to match. The finish shown in the photo is grey stone-textured cladding.
Product Code: TR323
Glass and Surface Details
The model is configured as a single pivot leaf. The surface features horizontal strip cladding. The surface is finished in grey stone texture.
The model features a glass facade to the side. A flush handle was chosen for this model. The finish shown is the catalog choice — a different cladding can be selected from our cladding options.
The design language is described as modern pivot.
Where Is It Used?
It's most often used in hotel/showroom-entrance and wide-fronted detached-house projects. The one-piece leaf presents an unbroken surface when viewed from outside. The leaf turns on bearings set into the floor and the head frame, which makes possible sizes a hinge simply couldn't carry. In return, it needs clearance to swing both in front of and behind the door. Our when to choose a pivot door page explains which entrances suit it.
Measurement, Production and Installation
Measurements are taken from the door opening, not the existing leaf — we've written up the step-by-step method on our how measurements are taken page. Frame, steel thickness, infill and lock specifications are listed in the feature table below. The steel choice is compared on our galvanized vs. cold-rolled steel page, and lock alternatives on our lock systems page. The care steps that extend the door's lifespan are on our care and lifespan page, and warranty coverage is on our warranty and service page.
Frequently Asked Questions
How is the price determined for TR323?
We can't quote a price before measuring. The size of the door opening, along with the cladding, glass and lock you choose, directly affects the amount; the survey is free, and an itemized quote follows. See our steel door prices page for details.
Can I have this model made in a color other than grey stone-textured?
Yes, the color isn't fixed. The catalog shows grey stone-textured, but the cladding is chosen to suit the project; we've written up which finish works best where on our cladding options page.
Can the glass pattern be different?
Yes. The glass shown is this model's catalog finish; it can be produced in a different color and pattern as long as Şişecam 5+5 mm laminated glass is used. A version without glass is also possible.
How is the measurement taken for TR323?
Measuring is our job. We measure the clear width and height of the door opening from the finished floor, plus the wall thickness; details are on our how measurements are taken page.
How do I get a quote for TR323?
You can fill out the pre-order form on the site, or reach us at 0532 689 21 46. Mentioning the TR323 product code in your request speeds up the process. You can browse other pivot steel door models on our pivot steel door models page.
Specifications
| Product code | TR323 |
| Category | Pivot Steel Door Models |
| Leaf construction | pivot single leaf |
| Color / finish | grey stone texture |
| Surface pattern | horizontal strip cladding |
| Handle | recessed handle |
| Design language | modern pivot |
| Mechanism | Floor- and ceiling-mounted pivot (rotating) mechanism |
| Rotation system | Floor and ceiling bearings — no conventional hinges used |
| Load transfer | Leaf weight is transferred to the floor, not the frame |
| Rotation axis | Determined per project based on leaf width (central or offset) |
| Floor preparation | Preparation is required where the bottom bearing sits — assessed during site survey |
| Required clearance | Clearance is needed in both directions, as the leaf swings both inward and outward |
| Maximum leaf | Custom project-based sizing — tall and wide leaf production |
| Sheet thickness | Frame 2 mm (0.079"), leaf 1.5+1.5 mm (0.118" total) DKP steel sheet (Ereğli A1) |
| Frame | Ereğli A1 grade 2 mm (0.079") DKP steel sheet, omega-bent |
| Frame reinforcement | Lock area and bearing seats reinforced with 3 mm (0.118") DKP steel sheet |
| Leaf | Ereğli A1 grade 1.5 mm (0.059") + 1.5 mm (0.059") omega-bent, monoblock-reinforced pan system |
| Leaf reinforcement | Lock area and pivot shaft surround reinforced with 3 mm (0.118") angle bar |
| Leaf thickness | Bare metal 70 mm (2.76") — 90 mm (3.54") in total |
| Infill | 80 kg/m³ rock wool |
| Lock surround | integrated with 1 mm (0.039") grade 304 stainless steel |
| Gasket | Silicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf (insect-, dust- and airtight) |
| Surface finish | 10 mm (0.394") Camsan first-grade iroko |
| Finish options | Powder coating, natural wood, marine plywood, iroko wood or composite compact laminate |
| Varnish | Polyurethane infill, 90-micron coverage rating |
| Polish | Akzo Nobel |
| Accessories | first-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions) |
| Installation | Installed by aligning the floor and ceiling bearings; one-piece frame, fixed with M8 bolts |
| Frame-to-wall gap | 1 cm (0.394"), filled with polyurethane foam |
| Production | Manufactured to custom on-site measurements |
| Warranty | Unlimited coverage for manufacturing defects — 2-year official warranty certificate |
| Lock system | Optional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock |
| Glass section | side glass facade |
| Glass type | Şişecam 5+5 mm (0.394" total) laminated glass (impact resistant) |
Frequently Asked Questions
What is the lead time for a custom villa door?
Production takes 20-25 days from the day the specification is approved. Custom detailing — carved cladding, oversized leaves, special glass — can extend that, and we confirm the date in writing before starting. Ocean freight time to the destination port is added on top.
How are steel doors packaged for sea freight export?
Each door is crated in a wooden case built to its own dimensions, with edge protection and corner blocks, then strapped to prevent movement inside the container. Full container loading is used for project quantities; single doors and small orders ship as groupage cargo.
What measurements do you need to quote?
The width, height and wall thickness of the rough opening, in millimetres or in inches — whichever your drawings use. Photographs of the opening from inside and outside help us confirm the swing direction and the frame detail. No site visit is needed.
Can you manufacture to imperial (inch) dimensions?
Yes. An opening given as 36 x 80 inches is manufactured to that dimension directly. Nothing is converted to a nearest metric size and rounded, so the door arrives at the size your drawing specifies.
Who installs the door at the destination?
Your own contractor. Every shipment includes an installation drawing and the frame fixing set, and the frame is designed to be set into the opening without special tooling.
What export documents travel with the shipment?
Commercial invoice, packing list and certificate of origin, plus whatever else the customs broker at the destination requires. Documentation is prepared before the container leaves the factory.
- • A free on-site survey is carried out before ordering to measure the door opening.
- • Production follows the dimensions and finish you approve after the survey.
- • Installation is carried out on-site by our own team.
- • Our warranty against manufacturing and workmanship defects is unlimited; an official 2-year warranty document is provided on delivery.
- • Price incl. VAT: %20 Includes VAT.
You May Also Like
Before you decide
Pages where we cover the technical questions most often asked about this model:
modern design
More Models in This Style

Geometric Diamond Orange Red Walnut Steel Door C-TR730

Diamond-Motif Dark Brown Steel Door C-TR726

Circle Medallion Dark Burgundy Brown Steel Door C-TR720

Tall Vertical Dark Burgundy Gloss Steel Door C-TR718
anthracite and grey
Models in the Same Color Family

Fine Horizontal Anthracite Gray Building Entrance Door TR526

Stainless-Frame Anthracite Grey Building Entrance Door TR523

Horizontal Stainless Anthracite Grey Metallic Building Entrance Door TR511





