Steel Door Prices 2026 — What Determines the Price?

There is no single figure for the price of a steel door, because a door is not a product sold in ready-made sizes. The same model costs a different amount in two different entrances: the dimensions change, the finish changes, the installation conditions change. On this page we explain what determines the price, item by item, so you can compare the quotes you receive — ours included — line by line.

Why don't we publish prices on the site?

Because they would be misleading. Figures you see online, like "villa doors from 84,000 TL", are the lowest amount quoted for one specific size and one specific finish; if your entrance is not that size, that price does not apply to you. Since we build every door to measurements taken on site, we can only state the amount after a survey. The survey is free and carries no obligation.

The 7 items that determine a steel door's price

1. The size of the door opening

Width, height and wall thickness. Non-standard dimensions mean more sheet steel and more labor. As the dimensions grow, the leaf gets heavier, which changes the number of hinges, the hinge type and, in some cases, the choice of lock. A double-leaf entrance is priced differently from a single leaf of the same total width.

2. The type of finish

This is the item that moves the price the most. Powder coating is the most economical option; compact composite and solid wood sit at the top end. On a door facing the exterior, the finish is not just a matter of looks but of lifespan: the wrong finish deforms in three years, the right one holds up for fifteen. The options, and which exposure each one suits, are covered in detail in our finish guide.

3. The lock system

Within the Italian Mottura and Mul-T-Lock ranges, hook-bolt, monoblock and central options are priced differently. As the number of locking points increases, so do both the materials and the labor on the leaf. Adding card, keypad or fingerprint access is a separate item. What the number of locking points actually does is explained in our lock guide.

4. Glass and wrought-iron work

Glazed models use Şişecam 5+5 mm laminated glass. The size and number of the glass panels, and the intricacy of the wrought-iron work, directly affect the amount. Hand-worked wrought-iron patterns cost noticeably more than machine-cut geometric designs.

5. Hardware quality

Our standard is first-grade 304 stainless steel. In salty air, such as by the sea, we recommend 316 Häfele stainless brass; it costs more, but in that climate 304 stains over time. The choice of pull handle, knocker and kick plate is also itemized separately.

6. Door type

Pivot doors cost more than hinged doors of the same size, because they require floor and ceiling bearings plus additional body reinforcement. Building entrance doors carry reinforced profiles, 304 stainless kick plates and a push-to-open release system. Apartment entrance doors are generally the most economical group.

7. Installation conditions

Removing the old door, which floor you are on, elevator access and whether the wall is reinforced concrete or brick all determine how long installation takes. This is why these things are checked in person during the survey — a firm figure given over the phone was given without seeing any of them.

What to look at when comparing prices

When collecting quotes from different companies, insist that the following lines are in writing. If these items are not specified, the two quotes are not describing the same thing:

Sheet grade and thickness	How many mm for the frame, how many + how many mm for the leaf, which grade (ours: Ereğli A1)
Leaf thickness	Bare metal and total thickness stated separately (ours: 70 mm / 90 mm)
Infill	Material and density — this is what determines insulation (ours: 80 kg/m³ rock wool)
Reinforcement	How many mm of sheet/angle at the lock and hinge zones (ours: 3 mm)
Lock brand	Not "security lock" — the brand and model name
Glass	Laminated or not, how many + how many mm, which brand
Warranty	What is covered for how many years; production and components separately
Installation	Included in the price or not, removal included or not, how many days

Our full production standard is published openly on the Production, Certifications and Trademark page. We publish it so you can compare our quote against any other.

Right and wrong ways to bring the price down

Right: Stepping down a tier in the finish, making the glass panel smaller, choosing a machine-cut pattern instead of wrought iron, using 304 stainless instead of 316 for the hardware (if you are not by the sea).

Wrong: Cutting back on sheet thickness, infill density, reinforcement or lock class. These make up not the visible side of the door but the side that does its job; savings made here come back to haunt you within a few years.

How to get a quote

Note the code of the model you like (for example BD-TR70, TR518 or BY-264), send it to us or call 0532 689 21 46. Our team comes to your address, measures the door opening and checks the installation conditions on site. A written, line-by-line itemized quote follows. The survey is free, and the quote carries no obligation.