Free site survey everywhere, free installation within Istanbul: +90 532 689 21 46
Bayrakdoor Steel Doors
Bayrakdoor

Brown Wood Building Entrance Door with Wrought Iron Glazing TR507

Product CodeTR507

A wide four-leaf building entrance with wrought iron motif glazing and a full-width transom window above. Product code: TR507. Made to measure after an on-site survey.

Leaf construction
four leaf
Color / finish
brown wood
Handle
curved stainless steel handle
Design language
modern
Upper section
transom window with wide glass
Share this model

Pre-Order & Price Request

This model is made to measure. Leave your request and we'll call you to arrange a site survey.

Product codeTR507

This is here to block automated submissions — it only takes a second.

  • Survey and measurement are free
  • Same-day response
  • Made in our own factory
  • Lifetime manufacturing warranty
Download this model's PDF spec sheet
Free on-site survey
Made in our own factory
Lifetime manufacturing warranty

TR507 is a building entrance door model distinguished by its wide four-leaf entrance, wrought iron motif glazing and a full-width transom window above. It is not sold in standard sizes; your entrance is measured on site and the leaf is built to that measurement. The finish in the photo is brown wood cladding.

Product Code: TR507

Glass, Upper Section and Surface

The model is configured with four leaves. The surface carries wrought iron motifs in the glazing. The colour applied is brown wood.

The model features wide clear glass panels. The upper section holds a wide glazed transom window. A curved stainless steel handle was chosen for this model. Colour, pattern and handle choices can be adapted to your project; the options are compared on the cladding options page.

Suitable Entrances

Gated community blocks and commercial building entrances are this model's typical settings. The monolithic leaf presents a seamless surface from the outside. The difference between these two types is not just size; we go into detail on the villa door vs building entrance door page.

Production and Installation

Measurements are taken from the door opening, not the existing leaf; the how to measure page walks through it step by step. Frame, sheet thickness, infill and lock specifications are listed in the table below. Sheet steel choices are compared on the galvanized or DKP sheet steel page, and lock alternatives on the lock systems page. After delivery, warranty and service coverage applies; see the care and lifespan page for keeping the surface in good condition.

Frequently Asked Questions

How is the price of TR507 determined?

We do not publish a list price, because every door is made to measure. The final amount depends on the size of the opening and the cladding, glass and lock you choose. After a free on-site survey we provide a written, itemized quote; the steel door prices page explains what drives the price.

Can TR507 be produced in a different colour?

Yes — the colour is not fixed. The catalogue shows brown wood, but the cladding is decided per project; on the cladding options page we explain which surface works best where.

Can the glass pattern be different?

Yes. The glass shown is this model's catalogue finish; it can be produced in a different colour or pattern, provided Şişecam 5+5 mm laminated glass is used. It can also be produced without glass.

Do I need to take the measurements myself?

Our survey team measures on site. If you would still like to know how it works, the how to measure page explains the three points we measure from.

How do I get a quote for TR507?

You can fill in the pre-order form on our website or call us on 0532 689 21 46. Quoting product code TR507 in your request helps us respond faster. You can browse our other building entrance door models on the building entrance door models page.

Specifications

Product codeTR507
CategoryBuilding Entrance Steel Door Models
Leaf constructionfour leaf
Color / finishbrown wood
Surface patternwrought iron motif on glass
Handlecurved stainless steel handle
Upper sectiontransom window with wide glass
Design languagemodern
Push-to-open systemself-closing system within 6 seconds
Door closersize 5 door closer
Access systemOptional card or keypad entry
Sheet thicknessFrame 2 mm, leaf 1.5+1.5 mm DKP steel sheet (Ereğli A1)
FrameEreğli A1 grade 2 mm DKP steel sheet, omega-bent
Frame reinforcementLock and hinge areas reinforced with 3 mm DKP steel sheet
LeafEreğli A1 grade 1.5 mm + 1.5 mm omega-bent, monoblock-reinforced pan system
Leaf reinforcementLock and hinge area reinforced with 3 mm angle bar
Leaf thicknessBare metal 70 mm — 90 mm in total
Infill80 kg/m³ rock wool
Lock surroundintegrated with 1 mm grade 304 stainless steel
Hinge3 adjustable 20 mm ball-bearing pin hinges
Hinge reinforcement5 mm thick flat bar
Fixed pin5 units on the hinge side, 20 mm diameter
GasketSilicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf (insect-, dust- and airtight)
Surface finish10 mm Camsan first-grade iroko
Finish optionsPowder coating, natural wood, marine plywood, iroko wood or composite compact laminate
VarnishPolyurethane infill, 90-micron coverage rating
PolishAkzo Nobel
Accessoriesfirst-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions)
InstallationOne-piece inner/outer frame, clamp-grip jointing, fastened with M8 bolts
Frame-to-wall gap1 cm, filled with polyurethane foam
ProductionManufactured to custom on-site measurements
WarrantyUnlimited coverage for manufacturing defects — 2-year official warranty certificate
Lock systemOptional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock
Glass sectionwide clear glass panels
Glass typeŞişecam 5+5 mm laminated glass (impact resistant)

You May Also Like

Before you decide

Pages where we cover the technical questions most often asked about this model:

modern design

More Models in This Style

View All

wood tone

Models in the Same Color Family

View All