Clean light oak surface with fine horizontal lines and a wide stainless steel band at the center. Product code: C-TR701. Made to measure after an on-site survey.
- Leaf construction
- single leaf
- Color / finish
- light oak
- Glass
- Şişecam 5+5 mm laminated glass (impact resistant)
- Handle
- recessed stainless steel band
- Design language
- modern-minimalist
Pre-Order & Price Request
This model is made to measure. Leave your request and we'll call you to arrange a site survey.
- Survey and measurement are free
- Same-day response
- Made in our own factory
- Lifetime manufacturing warranty
This steel door model carries the code C-TR701: a clean light oak surface with fine horizontal lines and a wide stainless steel band at the center. It is made to measure; whatever the width and height of your entrance, the leaf is produced to suit. The finish in the photo is light oak veneer.
Product Code: C-TR701
Pattern and Color
The model is configured as a single leaf. The surface carries fine horizontal lines with a horizontal stainless steel band at the center. The surface is finished in light oak.
It is completed with a recessed stainless steel band. The cladding and hardware are not fixed; the door can be produced with any of the alternatives on the cladding options page.
The design language is defined as modern minimal.
Where Is It Used?
It is chosen primarily for renovated homes and apartment flats. The one-piece leaf presents an unbroken surface from the outside.
From Measurement to Installation
Production starts with measurements taken on site. How the door opening is measured is covered on the how measurements are taken page; material choices are on the galvanized or DKP sheet steel and lock systems pages. This model's technical values are in the table below. After installation, our care and lifespan guidance and warranty and service terms apply.
Frequently Asked Questions
How much does the C-TR701 model cost?
The price cannot be quoted before measuring. The size of the door opening and your cladding, glass and lock choices directly affect the cost; the site survey is free and is followed by an itemized quote. See steel door prices for details.
Can the C-TR701 be produced in a different color?
Yes. The light oak finish in the image is this model's catalogue selection; it can be produced in different colors with compact laminate, composite, marine plywood and wood veneer options. We compare them on the cladding options page.
How does the measuring stage work when ordering the C-TR701?
Our survey team measures on site. If you would still like to know the process, the how measurements are taken page explains the three points we measure from.
How do I get a quote for the C-TR701?
You can fill in the pre-order form on our site or call us on 0532 689 21 46. Mentioning product code C-TR701 in your request speeds things up. You can browse other steel door models on the steel door models page.
Specifications
| Product code | C-TR701 |
| Category | Steel Door Models |
| Leaf construction | single leaf |
| Color / finish | light oak |
| Surface pattern | fine horizontal lines, stainless steel horizontal band in the middle |
| Handle | recessed stainless steel band |
| Design language | modern-minimalist |
| Glass | Şişecam 5+5 mm laminated glass (impact resistant) |
| Place of use | Flat entrance door |
| Sound and heat insulation | Insulation via infill material and gasket system |
| Interior surface | Interior panel in any desired color and finish |
| Sheet thickness | Frame 2 mm, leaf 1.5+1.5 mm DKP steel sheet (Ereğli A1) |
| Frame | Ereğli A1 grade 2 mm DKP steel sheet, omega-bent |
| Frame reinforcement | Lock and hinge areas reinforced with 3 mm DKP steel sheet |
| Leaf | Ereğli A1 grade 1.5 mm + 1.5 mm omega-bent, monoblock-reinforced pan system |
| Leaf reinforcement | Lock and hinge area reinforced with 3 mm angle bar |
| Leaf thickness | Bare metal 70 mm — 90 mm in total |
| Infill | 80 kg/m³ rock wool |
| Lock surround | integrated with 1 mm grade 304 stainless steel |
| Hinge | 3 adjustable 20 mm ball-bearing pin hinges |
| Hinge reinforcement | 5 mm thick flat bar |
| Fixed pin | 5 units on the hinge side, 20 mm diameter |
| Gasket | Silicone-based rubber gasket on 3 sides of the frame, 4 sides of the leaf (insect-, dust- and airtight) |
| Surface finish | 10 mm Camsan first-grade iroko |
| Finish options | Powder coating, natural wood, marine plywood, iroko wood or composite compact laminate |
| Varnish | Polyurethane infill, 90-micron coverage rating |
| Polish | Akzo Nobel |
| Accessories | first-grade 304 stainless steel or 316 Häfele stainless brass (depending on climate conditions) |
| Installation | One-piece inner/outer frame, clamp-grip jointing, fastened with M8 bolts |
| Frame-to-wall gap | 1 cm, filled with polyurethane foam |
| Production | Manufactured to custom on-site measurements |
| Warranty | Unlimited coverage for manufacturing defects — 2-year official warranty certificate |
| Lock system | Optional hook-bolt, monoblock or central — Italian Mottura or Mul-T-Lock |
- • A free on-site survey is carried out before ordering to measure the door opening.
- • Production follows the dimensions and finish you approve after the survey.
- • Installation is carried out on-site by our own team.
- • Our warranty against manufacturing and workmanship defects is unlimited; an official 2-year warranty document is provided on delivery.
- • Price incl. VAT: %20 Includes VAT.
You May Also Like
Before you decide
Pages where we cover the technical questions most often asked about this model:
modern design
More Models in This Style
Circle Medallion Dark Burgundy Brown Steel Door C-TR720
Vertical Riveted Black Orange-Grain Steel Door C-TR706
Minimal Red Walnut Building Entrance Door TR524
Brown Wood Building Entrance Door with Wrought Iron Glazing TR507
wood tone