Service area
Mersin Steel Doors & Made-to-Measure Villa Door Manufacturing
In Mersin, sea humidity meets the damp coming off the irrigated farmland of Çukurova. Together they create a harsher environment for a door than most coastal provinces do.
Districts we serve: Yenişehir, Mezitli, Toroslar, Akdeniz, Erdemli, Silifke, Tarsus, Anamur, Bozyazı
Corrosion exposure
The coastline is ISO 9223 class C4. Around the port and the industrial areas it pushes higher, since persistently high relative humidity keeps salt wet on the surface for longer.
What puts a door to the test in Mersin?
What drives corrosion is less the amount of salt than the total time the surface stays wet. High humidity makes that time long in Mersin; between the morning dew and the night damp, the door surface almost never dries out completely.
Delivery and installation
Deliveries are planned in batches, and the site survey and installation can be combined into one trip. During the humid season we recommend checking how the gasket has settled within the first week after installation.
How we build for Mersin
In this province we pay particular attention to fixings: stainless steel screws and pins make a clear difference over galvanized ones. We use a bottom profile that lets water drain away, and we never leave the lower edge of the leaf as a closed section, because moisture trapped inside is the kind of problem that eats the body from within.
Mersin Made-to-Measure Steel Door Manufacturing
Every leaf is built the same way regardless of the model: an Ereğli A1-grade 2 mm sheet frame, a 1.5 + 1.5 mm omega-folded monoblock leaf 90 mm thick, and 80 kg/m³ rock wool as the core fill. The lock and hinge areas are reinforced to 3 mm, and the lock itself is an Italian Mottura or Mul-T-Lock unit.
What drives corrosion here is the total time the surface stays wet, not the amount of salt. Between morning dew and night damp the door rarely dries out completely, which is why we never leave the lower edge of the leaf unsealed.
See steel door modelsMersin Villa Doors and Outdoor Entrance Models
An exterior door faces rain, sun and the day-to-night temperature swing head-on, so the cladding decision matters more than anything else. We use compact laminate, composite and marine plywood claddings that hold up outdoors, 304-grade stainless hardware as standard, and Şişecam 5+5 mm laminated glass in glazed models.
Villa doors near the coast get stainless screws and pins rather than galvanized ones, and a bottom profile that lets water drain away. Around the port and the industrial areas the exposure is higher still, so the paint system is specified accordingly.
See villa door modelsMersin Pivot Steel Door Systems
A pivot door carries its weight on floor and ceiling bearings instead of hinges, which is what makes sizes above 1.2 m and leaf weights past 200 kg possible. The bearing set is the critical component: we use a load-rated pivot system, and the floor bearing is positioned against the structural slab during installation, not into the screed.
Pivot doors go into the newer detached houses along the coastal road. Because water stands longer here than in drier provinces, the floor bearing is set with a drainage path in front of it.
See pivot door modelsWhich door type are you looking for?
Common questions from Mersin
Does Bayrakdoor carry out a free site survey in Mersin?
Yes, and there are two ways to do it. The online survey is free and immediate: you send photographs and the measurements of the opening, and we return a written quote. For confirmed orders the on-site survey is also free — we combine it with the installation in a single trip to Mersin, so the distance costs you nothing.
How many days does delivery take for a steel door or villa door ordered in Mersin?
Production takes 20-25 days once the measurements are approved, plus road transport to Mersin. The figure moves with the specification: cladding, lock system and non-standard dimensions all affect it. Shipments are planned in batches and the installation date is fixed at the time of the order, so it appears in your written quote rather than being estimated afterwards.
What is the warranty on villa doors used outdoors, and how durable are the materials?
Manufacturing and workmanship defects are covered with no time limit, and a two-year official warranty certificate is issued on delivery. Component warranties follow their own manufacturers — up to 25 years on the lock system. Outdoors, durability comes down to the specification: an Ereğli A1-grade body, a cladding rated for exterior use such as compact laminate or composite, stainless hardware and a multi-layer paint system.
Rust has started on the bottom edge of the door. Can it be repaired?
If it is only on the surface, sanding and touch-up paint will stop it. Once it has worked its way into the section there is no lasting fix, which is why building the bottom edge with drainage matters from the start.
Does a door swell in humid weather?
Steel leaves don't swell. What swells, when it happens, is the wood cladding and the wood fill around the frame. That is why we use moisture-stable solutions instead of wood fill in humid provinces.
How the process works in Mersin
Just send us the code of the model you like. Our team travels to Mersin, measures the width, height and wall thickness of the door opening, and checks the installation conditions on site. We then prepare a written, itemized quote. The site survey is free and doesn't commit you to anything.
Manufacturing happens at our own factory in Gaziosmanpaşa, Istanbul, and our own team handles installation. With no middlemen involved, one company is responsible for measurement, production and service.
Request your free survey for Mersin
Send the measurements of the door opening and a photograph over WhatsApp and we will price it the same day — the survey is free and places you under no obligation. If you would rather talk it through, give us a call; a model code is enough to start.