Service area
Ağrı Steel Doors & Made-to-Measure Villa Door Manufacturing
Ağrı has the hardest winter of any province we serve. Temperatures reach into the minus thirties, the frost period runs for months and the wind across the high plain drives snow against every exposed facade. A door specified for anywhere else will not perform here.
Districts we serve: Merkez, Doğubayazıt, Patnos, Diyadin, Eleşkirt, Tutak, Taşlıçay
Corrosion exposure
The dry, extremely cold climate puts the province in ISO 9223 class C2. Corrosion is effectively a non-issue; every design decision follows from temperature and wind.
What puts a door to the test in Ağrı?
At -30 °C the difference between a heated interior and outside reaches 50 degrees or more. An uninsulated leaf conducts that difference straight through and condensation forms and freezes on the inner face. Wind drives snow into any gap the gasket does not close, and standard gaskets are rigid long before those temperatures.
Delivery and installation
Deliveries are planned in batches and the survey, production and installation are arranged as a single programme. Winter installation is planned carefully: sealants do not cure and threshold work cannot be done properly in deep frost, so where possible we complete the entrance before the season closes in.
How we build for Ağrı
A thermally broken leaf with a high insulation value in the core fill is the starting point, not an upgrade. We use a cold-rated double gasket line, an automatic drop seal and, on exposed entrances, a multi-point lock so the leaf is pulled evenly into the frame against wind pressure.
Ağrı Made-to-Measure Steel Door Manufacturing
Every leaf is built the same way regardless of the model: an Ereğli A1-grade 2 mm sheet frame, a 1.5 + 1.5 mm omega-folded monoblock leaf 90 mm thick, and 80 kg/m³ rock wool as the core fill. The lock and hinge areas are reinforced to 3 mm, and the lock itself is an Italian Mottura or Mul-T-Lock unit.
At a 50-degree difference the thermal break is the starting point of the specification, not an option. The gasket is rated well below freezing and the lock keep is placed where water cannot collect and freeze.
See steel door modelsAğrı Villa Doors and Outdoor Entrance Models
An exterior door faces rain, sun and the day-to-night temperature swing head-on, so the cladding decision matters more than anything else. We use compact laminate, composite and marine plywood claddings that hold up outdoors, 304-grade stainless hardware as standard, and Şişecam 5+5 mm laminated glass in glazed models.
An exterior door here gets high insulation in the core fill, a cold-rated double gasket line, an automatic drop seal and, on exposed entrances, a multi-point lock so wind cannot open gaps at the corners.
See villa door modelsAğrı Pivot Steel Door Systems
A pivot door carries its weight on floor and ceiling bearings instead of hinges, which is what makes sizes above 1.2 m and leaf weights past 200 kg possible. The bearing set is the critical component: we use a load-rated pivot system, and the floor bearing is positioned against the structural slab during installation, not into the screed.
Pivot entrances are rare in the most exposed locations for good reason: a wide leaf takes heavy wind and snow load. Where one is specified, the bearing is dimensioned for lateral load and a floor stop limits the swing.
See pivot door modelsWhich door type are you looking for?
Common questions from Ağrı
Does Bayrakdoor carry out a free site survey in Ağrı?
Yes, and there are two ways to do it. The online survey is free and immediate: you send photographs and the measurements of the opening, and we return a written quote. For confirmed orders the on-site survey is also free — we combine it with the installation in a single trip to Ağrı, so the distance costs you nothing.
How many days does delivery take for a steel door or villa door ordered in Ağrı?
Production takes 20-25 days once the measurements are approved, plus road transport to Ağrı. The figure moves with the specification: cladding, lock system and non-standard dimensions all affect it. Shipments are planned in batches and the installation date is fixed at the time of the order, so it appears in your written quote rather than being estimated afterwards.
What is the warranty on villa doors used outdoors, and how durable are the materials?
Manufacturing and workmanship defects are covered with no time limit, and a two-year official warranty certificate is issued on delivery. Component warranties follow their own manufacturers — up to 25 years on the lock system. Outdoors, durability comes down to the specification: an Ereğli A1-grade body, a cladding rated for exterior use such as compact laminate or composite, stainless hardware and a multi-layer paint system.
Ice forms on the inside of the door. What is wrong?
The leaf has no thermal break, or the break is inadequate for this climate. At a 50-degree difference the steel conducts the cold straight through and moisture in the indoor air freezes on the inner face. A properly broken leaf with insulated fill keeps the inner surface near room temperature.
Wind drives snow in around the door. Can that be stopped?
Yes, with a double gasket line and a multi-point lock. A single latch leaves the leaf loose at the corners under wind pressure and snow finds those gaps; pulling the leaf in at several points closes them evenly.
How the process works in Ağrı
Just send us the code of the model you like. Our team travels to Ağrı, measures the width, height and wall thickness of the door opening, and checks the installation conditions on site. We then prepare a written, itemized quote. The site survey is free and doesn't commit you to anything.
Manufacturing happens at our own factory in Gaziosmanpaşa, Istanbul, and our own team handles installation. With no middlemen involved, one company is responsible for measurement, production and service.
Request your free survey for Ağrı
Send the measurements of the door opening and a photograph over WhatsApp and we will price it the same day — the survey is free and places you under no obligation. If you would rather talk it through, give us a call; a model code is enough to start.