Service area
Elazığ Steel Doors & Made-to-Measure Villa Door Manufacturing
Elazığ sits beside the Keban reservoir, and the water changes the local climate enough to matter: humidity around the lake is higher than the rest of the region. The province also has a large volume of construction following the 2020 earthquake, which puts the anchoring detail at the centre of the work.
Districts we serve: Merkez, Kovancılar, Karakoçan, Palu, Maden, Baskil, Sivrice
Corrosion exposure
Inland the province is ISO 9223 class C2. Around the Keban reservoir the humidity raises it toward C3, mainly because the surface stays damp longer rather than because of any salt load.
What puts a door to the test in Elazığ?
Winters are cold with a long frost period and summers are hot and dry, so the annual range is wide. Near the lake, morning damp keeps surfaces wet longer than in the surrounding districts. In post-earthquake construction the wall build-up varies from block to block.
Delivery and installation
Deliveries are planned in batches and the survey is combined with the installation in one programme. On rebuilding projects the doors for a block are produced together and delivered in a single load.
How we build for Elazığ
A cold-flexible gasket and a clearance set from the annual range are the baseline. Near the reservoir we also seal the weld seams fully and drain the lower edge, because the surface there does not dry as quickly. On new construction the anchoring is planned to the substrate we find during the survey.
Elazığ Made-to-Measure Steel Door Manufacturing
Every leaf is built the same way regardless of the model: an Ereğli A1-grade 2 mm sheet frame, a 1.5 + 1.5 mm omega-folded monoblock leaf 90 mm thick, and 80 kg/m³ rock wool as the core fill. The lock and hinge areas are reinforced to 3 mm, and the lock itself is an Italian Mottura or Mul-T-Lock unit.
Flat entrance doors are dimensioned for a wide annual range with a cold-flexible gasket. In post-earthquake construction the anchoring is planned to the substrate found during the survey rather than assumed.
See steel door modelsElazığ Villa Doors and Outdoor Entrance Models
An exterior door faces rain, sun and the day-to-night temperature swing head-on, so the cladding decision matters more than anything else. We use compact laminate, composite and marine plywood claddings that hold up outdoors, 304-grade stainless hardware as standard, and Şişecam 5+5 mm laminated glass in glazed models.
Near the Keban reservoir we seal the weld seams fully and drain the lower edge, because the surface there stays damp longer than in the surrounding districts. There is no salt, so the hardware does not need to be stainless.
See villa door modelsElazığ Pivot Steel Door Systems
A pivot door carries its weight on floor and ceiling bearings instead of hinges, which is what makes sizes above 1.2 m and leaf weights past 200 kg possible. The bearing set is the critical component: we use a load-rated pivot system, and the floor bearing is positioned against the structural slab during installation, not into the screed.
Pivot doors go into the newer detached houses around the centre and along the lake road. The bearing is set against the structural slab rather than the screed, which matters in new construction where floor build-ups are still settling.
See pivot door modelsWhich door type are you looking for?
Common questions from Elazığ
Does Bayrakdoor carry out a free site survey in Elazığ?
Yes, and there are two ways to do it. The online survey is free and immediate: you send photographs and the measurements of the opening, and we return a written quote. For confirmed orders the on-site survey is also free — we combine it with the installation in a single trip to Elazığ, so the distance costs you nothing.
How many days does delivery take for a steel door or villa door ordered in Elazığ?
Production takes 20-25 days once the measurements are approved, plus road transport to Elazığ. The figure moves with the specification: cladding, lock system and non-standard dimensions all affect it. Shipments are planned in batches and the installation date is fixed at the time of the order, so it appears in your written quote rather than being estimated afterwards.
What is the warranty on villa doors used outdoors, and how durable are the materials?
Manufacturing and workmanship defects are covered with no time limit, and a two-year official warranty certificate is issued on delivery. Component warranties follow their own manufacturers — up to 25 years on the lock system. Outdoors, durability comes down to the specification: an Ereğli A1-grade body, a cladding rated for exterior use such as compact laminate or composite, stainless hardware and a multi-layer paint system.
Does a house near the reservoir need a different specification?
Sealed weld seams and a drained bottom edge, yes — the surface there stays damp longer than in the surrounding districts. There is no salt, so stainless hardware is not necessary as it would be on a coast.
What is checked before fitting a door in a newly built block?
The wall build-up. Aerated concrete, brick and reinforced concrete each need a different anchor, and in post-earthquake construction it varies between blocks. We identify it during the survey rather than on installation day.
How the process works in Elazığ
Just send us the code of the model you like. Our team travels to Elazığ, measures the width, height and wall thickness of the door opening, and checks the installation conditions on site. We then prepare a written, itemized quote. The site survey is free and doesn't commit you to anything.
Manufacturing happens at our own factory in Gaziosmanpaşa, Istanbul, and our own team handles installation. With no middlemen involved, one company is responsible for measurement, production and service.
Request your free survey for Elazığ
Send the measurements of the door opening and a photograph over WhatsApp and we will price it the same day — the survey is free and places you under no obligation. If you would rather talk it through, give us a call; a model code is enough to start.