Service area
Iğdır Steel Doors & Made-to-Measure Villa Door Manufacturing
Iğdır is the exception in eastern Anatolia. The Aras valley gives it a microclimate warm enough for apricots and cotton, so while the provinces around it are dealing with deep frost, here the governing conditions are heat, a very wide day-to-night swing and wind.
Districts we serve: Merkez, Tuzluca, Aralık, Karakoyunlu
Corrosion exposure
The dry valley climate puts the province in ISO 9223 class C2. Humidity is low and there is no marine or industrial influence, so corrosion is not a practical concern.
What puts a door to the test in Iğdır?
The daily swing is the unusual feature: hot days and much cooler nights, repeated through the growing season. Materials with different expansion rates pull away from each other under that daily cycle — a wooden panel on a steel leaf being the obvious case. Valley wind carries fine dust continuously.
Delivery and installation
Deliveries are planned in batches through the eastern route and the survey is combined with the installation. The province is far from the factory, so measurement, production and installation are arranged as one programme.
How we build for Iğdır
We favour claddings and fixing methods that tolerate daily movement over single-piece wooden panels, and set the clearance for the daily cycle rather than only the annual one. The lock body is dust-sealed and we recommend dry graphite maintenance, since the valley wind never really stops.
Iğdır Made-to-Measure Steel Door Manufacturing
Every leaf is built the same way regardless of the model: an Ereğli A1-grade 2 mm sheet frame, a 1.5 + 1.5 mm omega-folded monoblock leaf 90 mm thick, and 80 kg/m³ rock wool as the core fill. The lock and hinge areas are reinforced to 3 mm, and the lock itself is an Italian Mottura or Mul-T-Lock unit.
The daily swing here is wider than the seasonal one in many provinces, so the clearance is set for the daily cycle. The lock body is dust-sealed against the valley wind.
See steel door modelsIğdır Villa Doors and Outdoor Entrance Models
An exterior door faces rain, sun and the day-to-night temperature swing head-on, so the cladding decision matters more than anything else. We use compact laminate, composite and marine plywood claddings that hold up outdoors, 304-grade stainless hardware as standard, and Şişecam 5+5 mm laminated glass in glazed models.
We favour claddings that tolerate daily movement over single-piece wooden panels — under this cycle a wooden panel on a steel leaf works its joints loose. The extreme-cold package used in the neighbouring provinces is usually unnecessary here.
See villa door modelsIğdır Pivot Steel Door Systems
A pivot door carries its weight on floor and ceiling bearings instead of hinges, which is what makes sizes above 1.2 m and leaf weights past 200 kg possible. The bearing set is the critical component: we use a load-rated pivot system, and the floor bearing is positioned against the structural slab during installation, not into the screed.
Pivot doors go into the newer detached houses in the valley. Dust is constant, so the bearing set is sealed and the maintenance routine is explained at handover.
See pivot door modelsWhich door type are you looking for?
Common questions from Iğdır
Does Bayrakdoor carry out a free site survey in Iğdır?
Yes, and there are two ways to do it. The online survey is free and immediate: you send photographs and the measurements of the opening, and we return a written quote. For confirmed orders the on-site survey is also free — we combine it with the installation in a single trip to Iğdır, so the distance costs you nothing.
How many days does delivery take for a steel door or villa door ordered in Iğdır?
Production takes 20-25 days once the measurements are approved, plus road transport to Iğdır. The figure moves with the specification: cladding, lock system and non-standard dimensions all affect it. Shipments are planned in batches and the installation date is fixed at the time of the order, so it appears in your written quote rather than being estimated afterwards.
What is the warranty on villa doors used outdoors, and how durable are the materials?
Manufacturing and workmanship defects are covered with no time limit, and a two-year official warranty certificate is issued on delivery. Component warranties follow their own manufacturers — up to 25 years on the lock system. Outdoors, durability comes down to the specification: an Ereğli A1-grade body, a cladding rated for exterior use such as compact laminate or composite, stainless hardware and a multi-layer paint system.
Why does the wooden cladding on the door keep working loose?
The daily temperature swing here is unusually wide, and wood and steel expand at different rates. Under a daily cycle the joints work loose over time. A compact laminate or composite cladding tolerates the movement and stays put.
Is a winter specification needed in Iğdır?
Less than in the neighbouring provinces. The valley is markedly warmer than Ağrı or Kars, so the extreme cold package is usually unnecessary — the money is better spent on the cladding and the dust sealing.
How the process works in Iğdır
Just send us the code of the model you like. Our team travels to Iğdır, measures the width, height and wall thickness of the door opening, and checks the installation conditions on site. We then prepare a written, itemized quote. The site survey is free and doesn't commit you to anything.
Manufacturing happens at our own factory in Gaziosmanpaşa, Istanbul, and our own team handles installation. With no middlemen involved, one company is responsible for measurement, production and service.
Request your free survey for Iğdır
Send the measurements of the door opening and a photograph over WhatsApp and we will price it the same day — the survey is free and places you under no obligation. If you would rather talk it through, give us a call; a model code is enough to start.